Sticky's Stealth Stash

Some clear and some milky and no amber that I could find. My box has been relatively stable and steady with the temp and humidity. As winter approaches things are getting a bit dryer in the air outside of the box therefore the same inside. I will adjust for that as needed.

I'm thinking as much as 3 more weeks to go?
 

Attachments

  • 20201027_204639.jpg
    20201027_204639.jpg
    1.9 MB · Views: 21
  • 20201028_055538.jpg
    20201028_055538.jpg
    295 KB · Views: 23
  • Screenshot_20201028-055644_Govee Home.jpg
    Screenshot_20201028-055644_Govee Home.jpg
    379.1 KB · Views: 15
Well shit....maybe 2 CO2 jugs are too much...got up to almost 2000ppm right before lights came back on...had 2 people and a dog over for dinner, they must have been heavy breathers!!
 

Attachments

  • 20201028_200026.jpg
    20201028_200026.jpg
    5.9 MB · Views: 13
Is she fox tailing? What does that mean if she is? I saw a few amber trichomes yesterday so maybe 2 more weeks? Lots of new white hairs though...
 

Attachments

  • 20201101_053935.jpg
    20201101_053935.jpg
    2.2 MB · Views: 27
  • 20201101_053944.jpg
    20201101_053944.jpg
    2.3 MB · Views: 27
  • 20201101_054220.jpg
    20201101_054220.jpg
    317 KB · Views: 26
Looking like I'm getting amber trichomes showing. I'm going to chop on the 15th, start feeding just water on the 8th. Ice shock and 48 hours of darkness starting on the 20th.
 

Attachments

  • Screenshot_20201104-064827_Gallery.jpg
    Screenshot_20201104-064827_Gallery.jpg
    1.2 MB · Views: 9
  • Screenshot_20201104-064848_Gallery.jpg
    Screenshot_20201104-064848_Gallery.jpg
    1.1 MB · Views: 9
Sneak peek at my new box in the making. Red oak finish. Will be 7'x2'x2' with an upper flower chamber that is 4' tall and a lower veg chamber that is 3' tall. All new hardware, lights, fans and gear. I'm going to make this thing look pro af. More to come later this week!!
 

Attachments

  • 20201103_144945.jpg
    20201103_144945.jpg
    1.6 MB · Views: 9
  • 20201104_065259.jpg
    20201104_065259.jpg
    368.5 KB · Views: 9
Got a coat of paint on the inside sides of the panels. Went with high bright white matte ceiling paint. Probably 3 coats to go.
 

Attachments

  • 20201104_195125.jpg
    20201104_195125.jpg
    1.9 MB · Views: 7
  • 20201104_195140.jpg
    20201104_195140.jpg
    1.8 MB · Views: 7
The build continues, its a lot taller than I expected.
 

Attachments

  • 20201107_223055.jpg
    20201107_223055.jpg
    1 MB · Views: 7
  • 20201107_223113.jpg
    20201107_223113.jpg
    799.9 KB · Views: 7
  • 20201107_222824.jpg
    20201107_222824.jpg
    836.8 KB · Views: 7
Making small step progress. Hoping to have all cutouts done tonight. I really like this AC Infinity kit, looks like something on a semi truck.
 

Attachments

  • 20201109_154827.jpg
    20201109_154827.jpg
    2.7 MB · Views: 11
  • 20201109_154851.jpg
    20201109_154851.jpg
    1.7 MB · Views: 11
Cutting makes me nervous. Everything should look pretty slick once completed
 

Attachments

  • 20201109_185442.jpg
    20201109_185442.jpg
    6.4 MB · Views: 8
  • 20201109_195122.jpg
    20201109_195122.jpg
    1.2 MB · Views: 7
More paint....about 20 lbs of paint on this thing at this point haha...its starting to look good and I'm getting closer to the end! So stoked to get this fully assembled.
 

Attachments

  • 20201110_075042.jpg
    20201110_075042.jpg
    1.3 MB · Views: 5
  • 20201109_210203.jpg
    20201109_210203.jpg
    6.4 MB · Views: 5
Making progress. Need to add the divider air chamber shelves and build the front doors which I'm most nervous about! Waiting on cabinet trim to make the doors semi fancy.
 

Attachments

  • 20201111_172624.jpg
    20201111_172624.jpg
    1.2 MB · Views: 9
  • 20201111_172637.jpg
    20201111_172637.jpg
    1.2 MB · Views: 8
  • 20201111_172653.jpg
    20201111_172653.jpg
    1.4 MB · Views: 8
  • 20201111_172712.jpg
    20201111_172712.jpg
    874.9 KB · Views: 9
  • 20201111_172732.jpg
    20201111_172732.jpg
    1.2 MB · Views: 9
Last mistake grow in the small box is done trimmed and jarred for cure
38 grams of goodness! 2 months and I'll have some tasty purple kush!!

In the meantime I'm finishing up DZ1 which is my new box for veg and flower at the same time. I'm excited to attempt perpetual grow. I just started femenized Mazar and my buddybis actually having me finish out one of his smaller ladies in my new flower box as I won't have anything for that section till the Mazar is ready to roll.

Now I'm testing the box, hoping to be able to fill it side to side front to back with one giant lady per section. Time will tell!

Also look out for BlumenBot if this turns out to be functional!!
 

Attachments

  • 20201205_081821.jpg
    20201205_081821.jpg
    6.8 MB · Views: 13
  • 20201205_090913.jpg
    20201205_090913.jpg
    1.8 MB · Views: 17
  • 20201205_215532.jpg
    20201205_215532.jpg
    1.3 MB · Views: 15
  • IMG_20201203_115552_035.jpg
    IMG_20201203_115552_035.jpg
    55.4 KB · Views: 13
If you could fit 2 or 3 mini bonsai-style mothers in the bottom, cloned em and did a sog on the top, that would be a nice option to consider. Even if you wanted to add a new strain from seed every grow cycle, there would be no downtime at all in between because of all the clones. If plant limits are an issue, you could always just do 1 or 2 fem seeds and pull a clone or 2 from each before putting up top. Once they flower take the best clone you took and keep as mother and then start a new strain. I'm sure you've probably thought of something exactly like this, just thought I'd put it out there cause I can see you pulling in like a hp with the right strain/light combo in that build.
 
I'm looking to do one solid lady in each chamber and keep rotating then out. Since I'm a very novice and new grower I want to try lots of different strains. My friend was running out of room in his container flower box and he has a runt Girl Scout Cookies that fit perfectly in my top section. Dropped my temps by 10*F as opposed to running it empty. The box is now very stable. I have room to go in every direction and I can add a dehumidifier or lower ambient humidity to help in flower but so far things are looking great!!

BlumenBot here we come!!!
 

Attachments

  • 20201206_222952.jpg
    20201206_222952.jpg
    1.8 MB · Views: 17
  • 20201206_220120.jpg
    20201206_220120.jpg
    1.4 MB · Views: 17
  • 20201206_220133.jpg
    20201206_220133.jpg
    2.7 MB · Views: 17
  • Screenshot_20201206-222557_Govee Home.jpg
    Screenshot_20201206-222557_Govee Home.jpg
    295.4 KB · Views: 15
  • Screenshot_20201206-222446_Govee Home.jpg
    Screenshot_20201206-222446_Govee Home.jpg
    287.5 KB · Views: 11
Looking real good now that you got a lady in there, and by the looks of it she's already 2-3 weeks into flower, which is a nice bonus!! I probably don't even have to mention this but be sure to keep the light cycle the same as whatever it was on when you got it.
 
Looking real good now that you got a lady in there, and by the looks of it she's already 2-3 weeks into flower, which is a nice bonus!! I probably don't even have to mention this but be sure to keep the light cycle the same as whatever it was on when you got it.
Yessir on at 5pm off at 5am :) she won’t skip a beat except I’m slightly concerned he didn’t bring it over in the golden hour of darkness before the 5pm start...she was dark for about 20 minutes in transport from his space to mine at around 8pm. Hopefully that’s not going to cause hermie
 
Yessir on at 5pm off at 5am :) she won’t skip a beat except I’m slightly concerned he didn’t bring it over in the golden hour of darkness before the 5pm start...she was dark for about 20 minutes in transport from his space to mine at around 8pm. Hopefully that’s not going to cause hermie

Awesome bro, glad to hear. Should be no trouble at all for the move, dark is definitely not as bad as light. It's Iike when you wake up and someone flips the light on and you're blinded for a minute, shit sucks. If you're already awake and someone turns off the lights, it ain't shit. Plus I think it takes longer than 20 mins for a weed plant to go back to sleep, unless its pure indica, be passed out in under 5 minutes lmao
 
Introducing the latest stealth grow box for my home setup!! There is a small margin of error due to the fact its all hand cut but I think I have it with 99% of perfect 

This is a 7'6" tall cabinet with a 4' flower section and 3' veg section. I have 3 different 6500k lights for the veg section depending on the age of the plant and a 120w full spectrum light in the flower section. Ventilation is a 4" inline fan exhausting through a carbon filter at the top of flower. Intake is 2 square vents at the bottom of veg with a light proof pass through partition between the two sections. Internally I have 3 Vornado circulation fans; 1 in veg and 2 in flower. Light in veg can go as high as 5" from the top and in flower it fits right next to the ductwork about 6" from the top so I have maximized internal space for a 2x2' dual zone cabinet (I think).

I have a few residents already and the setup is very stable in both environments. I have room to add smaller appliances if needed. I am excited to post more soon, I'm only 48 hours into true testing but things are looking really solid. Box is staying stable under 80*F in both chambers. Humidity isn't bad either and I only have an evap humidifier sitting next to the box outside.

Currently running Cookies n Cream from a friend in the flower box and Mazar seedling in the veg section.

I'm excited to get growing with this new setup. I'm keeping the old box as my drying chamber for now, its the perfect space, dark, and climate controlled.
 

Attachments

  • 20201206_114727.jpg
    20201206_114727.jpg
    1.8 MB · Views: 7
  • 20201206_114709.jpg
    20201206_114709.jpg
    1.6 MB · Views: 7
  • 20201206_114807.jpg
    20201206_114807.jpg
    1.4 MB · Views: 7
  • 20201206_114821.jpg
    20201206_114821.jpg
    2.2 MB · Views: 6
  • 20201206_114837.jpg
    20201206_114837.jpg
    2 MB · Views: 7
  • 20201205_215532.jpg
    20201205_215532.jpg
    1.3 MB · Views: 7
  • 20201206_101841.jpg
    20201206_101841.jpg
    1.3 MB · Views: 7
  • 20201206_101938.jpg
    20201206_101938.jpg
    4.2 MB · Views: 7
  • 20201206_101927.jpg
    20201206_101927.jpg
    919.5 KB · Views: 7
  • 20201206_101900.jpg
    20201206_101900.jpg
    4.9 MB · Views: 5
More pics
 

Attachments

  • 20201206_101958.jpg
    20201206_101958.jpg
    1.2 MB · Views: 5
  • 20201206_102006.jpg
    20201206_102006.jpg
    1.3 MB · Views: 5
  • 20201206_194956.jpg
    20201206_194956.jpg
    1.5 MB · Views: 5
  • Screenshot_20201209-065036_Govee Home.jpg
    Screenshot_20201209-065036_Govee Home.jpg
    331.6 KB · Views: 5
  • Screenshot_20201209-065145_Govee Home.jpg
    Screenshot_20201209-065145_Govee Home.jpg
    334.7 KB · Views: 5
  • 20201208_224442.jpg
    20201208_224442.jpg
    4.7 MB · Views: 6
  • 20201208_224748.jpg
    20201208_224748.jpg
    1.3 MB · Views: 6
  • 20201208_224745.jpg
    20201208_224745.jpg
    1.5 MB · Views: 6
  • 20201208_224742.jpg
    20201208_224742.jpg
    1.4 MB · Views: 7
  • 20201208_224730.jpg
    20201208_224730.jpg
    3.2 MB · Views: 7
Back
Top