Smuggler
Active Member
The idea: You buy a 3 inch diameter, thick wall (schedule 40), PVC pipe and cut it to roughly 11 or 12 inches long. Then you glue a PVC end cap on one end and glue a PVC screw off cap with rubber O ring on the other end. Let it thoroughly dry and air out until the glue smell is gone.
Then you repeat the process with 4 inch PVC, thick wall (schedule 40), pipe and end fittings making it just large enough to slide the 3 inch assembly into it and being able to seal it up.
After the tubes have dried and aired out, put your well bagged product into the 3 inch tube and seal it up tightly. Caution must be taken to not cross contaminate the outside of the 3 inch tube.
I have heard that yellow mustard throws dogs off but I havent tried it myself.
So, you smear yellow mustard all over the outside of the 3 inch assembly and slide that into the 4 inch PVC assembly. Seal it up tightly and wipe everything down with bleach and then alcohol.
Put that in a strong cardboard box and ship it UPS or FedEx.
Does anyone spot any problems or know why this wont work?
Thanks, S
Then you repeat the process with 4 inch PVC, thick wall (schedule 40), pipe and end fittings making it just large enough to slide the 3 inch assembly into it and being able to seal it up.
After the tubes have dried and aired out, put your well bagged product into the 3 inch tube and seal it up tightly. Caution must be taken to not cross contaminate the outside of the 3 inch tube.
I have heard that yellow mustard throws dogs off but I havent tried it myself.
So, you smear yellow mustard all over the outside of the 3 inch assembly and slide that into the 4 inch PVC assembly. Seal it up tightly and wipe everything down with bleach and then alcohol.
Put that in a strong cardboard box and ship it UPS or FedEx.
Does anyone spot any problems or know why this wont work?
Thanks, S