Setting Up a Secret Jardin DR60

SlimJim503

Well-Known Member
Was wanting to see if any had this tent and what your light and vent setups are.
The dimensions of the tent is 24"x24"x64" and i am wanting to run up to a 600w in a air cooled hood with scrubber.
Noise is my main worry and I'm looking for suggestions from people.
 

RCgrowerman

Active Member
I can tell you right off the bat that is too small for a 600W it was my original tent that I ran a 250/400w in. I upgrade to 36*36 and still dont get the most out of my 600W. Hope this helps also I don't recommend jarden's because they are so overpriced I got mine for 69.95 from amazon and it uses all the same materials and has lasted me the past year with only minor issues.
 

Coho

Well-Known Member
I run a 600 in a 3x3 secret jargin...I gotta stay on top of the heat in summer.cooltube and moving alot of air. Plus a 600 hood is cramped in a 3x3.
 

joseaf

Active Member
I can tell you right off the bat that is too small for a 600W it was my original tent that I ran a 250/400w in. I upgrade to 36*36 and still dont get the most out of my 600W. Hope this helps also I don't recommend jarden's because they are so overpriced I got mine for 69.95 from amazon and it uses all the same materials and has lasted me the past year with only minor issues.
600W is over kill for that size tent. when running 250w, expect 3 mason jars of good dried harvest. as for noise, invest in a quiet 4' FAN with speed controller. if you stick with 600w, consider the energy useage for so little return when a 250w and scrog will give you the same or more.
 

SlimJim503

Well-Known Member
Could you list your light and vent setups and what your temps are inside tent and in main room tents in. Pretty sure I'm going to go with a 400w switchable magnetic ballast with a air cooled hood and carbon scrubber just want to make sure i have enough cfm and big enough scrubber for the setup thanks for all your help!
 

SlimJim503

Well-Known Member
So I've done extensive research and this is what I've came up with.


Sunleaves Wind Tunnel 6" In-line Exhaust Fan


  • Energy Efficient, Serious air Power, High Volume and pressure
  • Quieter operation the metal fans, Durable, vibration-absorbing material
  • Permanently Sealed and lubricated bearings, Installs in any position (Mounting hardware included)
  • Class B thermal protective auto reset, Rated for moist environments
  • 5 Year Warranty


VSC-DNE - Day/Night Fan Speed Controller
The VSC-DNe is designed to gradually increase or decrease the speed of centrifugal fans depending on the day or night temperature set-points. The Variable Fan Speed Controller enables you to determine precise temperature levels to achieve within your growing environment by way of proper ventilation. The temperature differential switch can be set at 3°, 5°, or 7°F and comes complete with a 12 probe. The day and night temperature knobs can be set between 50°F and 100°F independently. The built in photocell will automatically sense day or night and adjust the speed of your fan accordingly. The VSC-DNe is rated for 6 amps @ 120 volt. 5 year no hassle

Phresh Filter 6in x 16in 400CFM

Lumatek 600-400w so i can turn the watts up in the winter
cooltube "thinking 19" hydrofarm need advice"
Insalated ducting "need help on what brand works best for odor and noise reduction"

Also plan on building a DIY box for my inline to reduce noise even further if needed maybe even a inline fan muffler.



Any help or advice on setup would be appreciated greatly!
 

SlimJim503

Well-Known Member
I have now a DR60 and a DR90 Next will be a DR120.

DR60
botanicare 2x2 flood table
viagrow 2x2 stand
DIY 8 bulb 26watt cfl fixture
110 CFM AC cooling fan on speed controller

Plants are
Dinachem clone
3x Dinafem Blue widow
3x Dinafem White widow

DR90
2xActive air 6 inch inline
2xActive fan speed controller
DR60-90 Plant support
Apollo Hort. Ratchet light hanger
Hydrofarm radiant 6
Freshfilter 400cfm 6x16
Lumatek dimable 400w
Thermoflo 6" insulated ducting
Lumatek 400w hps bulb
2x 80watt 5500k 5000L CFLs
3x Dinachem
1x Kush&cheese

The Chem and Kush popped soil 4/5/2013 and went into flower the end of may so they are 4 weeks into 12/12. Anything in the pics flowering is in the DR90 and the others in the DR60.
IMG_3867.jpgIMG_3866.jpgIMG_3864.jpgIMG_3861.jpgIMG_3860.jpgIMG_3858.jpg
 

Attachments

Top