Selecting dimmable driver for single CXB3590

Mazer said:

Hello Will, I am smack in the center of Europe.

Click to expand...

Mazer said:

Thanks everyone for your attention. It is great to get support from passionate growers such as yourselves.
For info, last time I grew lambs bread, it was nearly 20 years ago with street lamps... i am glad I'll be able to get back to this magnificent hobby.

ok, update on the project... not CXB3590 any longer. I want to spread the light sources. I looked at CXA1507, but


Therefore I concluded that 1507 are a bit too old school. I am on 3xCXA2530 3500k, cri 80, 800ma, Vf=37.
http://www.mouser.com/ProductDetail/Cree-Inc/CXA2530-0000-000N00T435F/?qs=/ha2pyFaduj82tDBGHXS/INN8ZtdxYErlXL3cqNJiZyxjfSCco3CUQ==

If I mount them in series, I'll need a driver that outputs a bit more than 90W with an output voltage of more than 115 V.
would this one do the trick?
http://www.mouser.com/ProductDetail/Mean-Well/ELG-100-C700B/?qs=sGAEpiMZZMt5PRBMPTWcaYoJ2bKEch7DHwN9Z9%2byzz6X%2bhiuKlqb9Q==

Plese don't give me a fish, teach me how to fish. I still can't figure out how to select my drivers.

looking forward to reading you.

Click to expand...

Will Thayer said:

OK, Have a look at this thread small COBs with some links at the end that might help you source parts. http://rollitup.org/t/best-cree-set-up-for-tiny-micro-grow.907799/

Cheers,
Will

Click to expand...