Second experience! How's going?

Leonida

Well-Known Member
Hey folks,

After my first plant I'm starting again with the same seed (royal critical automatic), first one was a success considering my expectation and gave me 54 GR of lovely weed!

This time I'm using a fabric pot 11 liters and proper nutes (hoping I'm able to manage them)

Light is the same Hydro Mars TS600 W 18/18 light at 45 cm from the plant at the moment.

Temp 22/26 and humidity 50/60

I moved her under the LED light just 3 days ago (she was growing outside the tent under a cfl for the first three week and she did not look too happy at that stage, but since i moved her in the tent she is looking better.

I will apply LST in few days, or u think she is too small? How does she look? Anything u would change or suggest?
 

Attachments

  • IMG_20200813_120043.jpg
    IMG_20200813_120043.jpg
    2 MB · Views: 10
  • IMG_20200814_123515.jpg
    IMG_20200814_123515.jpg
    2.7 MB · Views: 10
  • Screenshot_20200824-010052.jpg
    Screenshot_20200824-010052.jpg
    1.6 MB · Views: 10
  • IMG_20200824_174742.jpg
    IMG_20200824_174742.jpg
    3 MB · Views: 11
  • IMG_20200824_174734.jpg
    IMG_20200824_174734.jpg
    2 MB · Views: 12
  • IMG_20200824_174726.jpg
    IMG_20200824_174726.jpg
    2.1 MB · Views: 12
Best to start as early as you can due to the shorter finish times for autos. I start when there are 5 nodes and usually top before I tie down... then again I'm not using autos. Best of luck on your grow.
 
It looks like you are only watering a small amount. You need to totally saturate that pot. Then leave it until it dries out. Even if it’s 4-5 days.

I start LST as soon as the main branch can reach the side of the pot. Then tie it down. I usually anchor it the other way so the tie downs don’t break the plant.
 
It looks like you are only watering a small amount. You need to totally saturate that pot. Then leave it until it dries out. Even if it’s 4-5 days.

I start LST as soon as the main branch can reach the side of the pot. Then tie it down. I usually anchor it the other way so the tie downs don’t break the plant.

Xfect got it, thanks

Will start LST today and will send some pics!

Did u see the post about the previous plant! It was a success! Thanks for all the suggestions ☺️
 
Tie one around the bottom of your main branch fist and anchor to the side of the pot. Then pull the main branch the opposite way of your anchor and tie that side down. Careful knot to snap anything.
 
Tie one around the bottom of your main branch fist and anchor to the side of the pot. Then pull the main branch the opposite way of your anchor and tie that side down. Careful knot to snap anything.

Okay all done, hopefully in the right way!
 

Attachments

  • IMG_20200825_195151.jpg
    IMG_20200825_195151.jpg
    2.7 MB · Views: 9
  • IMG_20200825_195134.jpg
    IMG_20200825_195134.jpg
    3.7 MB · Views: 8
  • IMG_20200825_195123.jpg
    IMG_20200825_195123.jpg
    1.3 MB · Views: 8
  • IMG_20200825_195118.jpg
    IMG_20200825_195118.jpg
    2.4 MB · Views: 7
  • IMG_20200825_195101.jpg
    IMG_20200825_195101.jpg
    2.4 MB · Views: 5
I also noticed that one of the red lights on the Mars Hydro is dead... I hope it's not a big deal? What are they for?
 

Attachments

  • IMG_20200825_195053.jpg
    IMG_20200825_195053.jpg
    2.4 MB · Views: 4
  • IMG_20200825_195050.jpg
    IMG_20200825_195050.jpg
    2.4 MB · Views: 4
Just to add an update..

What do you think? How does it look?
 

Attachments

  • IMG_20200930_121010.jpg
    IMG_20200930_121010.jpg
    2.2 MB · Views: 6
  • IMG_20200930_121015.jpg
    IMG_20200930_121015.jpg
    2 MB · Views: 6
  • IMG_20200930_121021.jpg
    IMG_20200930_121021.jpg
    2.1 MB · Views: 5
  • IMG_20200930_121029.jpg
    IMG_20200930_121029.jpg
    2.2 MB · Views: 5
  • IMG_20200930_121035.jpg
    IMG_20200930_121035.jpg
    2.5 MB · Views: 5
  • IMG_20200930_121051.jpg
    IMG_20200930_121051.jpg
    2.4 MB · Views: 4
Back
Top