boilingoil
Well-Known Member
I'll match that.
Samsung F Series LED Strip Build for a 3x3' (links for ALL parts inc.)
boilingoil
Well-Known Member
No hurt feelings here, going to take a lot more than someone posting on a forum to hurt my feelings.
coreywebster
Well-Known Member
Them bloody trichs lying again! Fuck em I say with their cut me down eyes and sending out false signals. 
a mongo frog
Well-Known Member
So to you those are done? I think you are being funny, just not sure what way the funny is directed.Them bloody trichs lying again! Fuck em I say with their cut me down eyes and sending out false signals.
The op is one of those know it alls. Knows everything. Now we have the biggest travesty grow of all time going on. If his grow gives you zero anxiety you are lying. Im fucking anxious just looking at those hung plants. How about you?
coreywebster
Well-Known Member
I wouldn't say I was anxious nor that its the worst thing I have seen on here. But yeah it was chopped early like you said.
Too many folks rely solely on trichs these days when its just one tool in the box. Like you say the swell hasn't happened.
I might not always agree with your opinions but who gives a fuck about that, I always enjoy what you have to say and the way you say it.
Rollverine
Well-Known Member
That's so dope!Just posting this light I just made, expect to see a lot more from me in the coming weeks as I get my strawberry banana seeds in and grow em under this bad boy. Plan to run Nectar for the Gods as well
The goal of this light was to strive for insanely good uniformity to help with canopy penetration and prevent any kind of light stress/burning from being too close (a common problem with fewer sources of more powerful lights).
What do ya'll think? I gotta clean up some of the wiring, but it's pretty much all complete.
Tent temps max out at 79f (74f ambient) and the temp of the strips is 45-50C measured directly center of the strips.
SPECS:
View attachment 4106859 View attachment 4106861
- 10x Samsung LT-F562B 2′ Strips, 50/50 mix of 3000k and 3500k
1x Mean Well HLG-320H-24B Driver- 1x 100K Ohm Potentiometer
- 10x 24" strips of 1" aluminum heatsink (i used u channel for my last build, the heatsink has way better thermal dissipation so far)
- 2x 30" pieces and 2x 24" pieces of aluminum L frame
- 1x roll of thermal double sided tape to mount strips easily
- ~3 feet of red/black 14g stranded tinned copper wire for wago to wago connections
- ~8 feet of black 18g solid core copper wire for poking into strip connectors easily
- A bunch of 5 slot wagos
- 5-15p NEMA cord 18g
- Waterproof connector for power cord
- Total power: 313w tested from wall
- Efficiency: 52.9%
- PAR Watts: 165.57w
- PPF calculated: 808 umol/s
- Estimated PPFD @ 18": ~900+umol /m2/ s
- COST: $405.95 SHIPPED TO ME
Humple
Well-Known Member
What was the final tally on the weight?
Yodaweed
Well-Known Member
That looks like a half pound or less once it dries, don't weigh wet bud, it's 90% water. Also your plants look like they need about 1 more week, thats a lot of white pistols.Harvest day (day 60 of flower) excuse my lame trim job, gonna go back over it once it is dried.
Wasn't expecting to harvest today. I woke up and checked the trichomes for the first time and noticed it was perfect.
Explains why it was fading too.
Oh, yeah, 2420 grams wet (with stems). Fuck off HPS bois
Montanan
Member
HOW DID IT WORK? GOOD WEED? Am looking at doing the same thing. Couldnt make up my mind on cmh light, nobody wouldJust posting this light I just made, expect to see a lot more from me in the coming weeks as I get my strawberry banana seeds in and grow em under this bad boy. Plan to run Nectar for the Gods as well
The goal of this light was to strive for insanely good uniformity to help with canopy penetration and prevent any kind of light stress/burning from being too close (a common problem with fewer sources of more powerful lights).
What do ya'll think? I gotta clean up some of the wiring, but it's pretty much all complete.
Tent temps max out at 79f (74f ambient) and the temp of the strips is 45-50C measured directly center of the strips.
SPECS:
View attachment 4106859 View attachment 4106861
- 10x Samsung LT-F562B 2′ Strips, 50/50 mix of 3000k and 3500k
1x Mean Well HLG-320H-24B Driver- 1x 100K Ohm Potentiometer
- 10x 24" strips of 1" aluminum heatsink (i used u channel for my last build, the heatsink has way better thermal dissipation so far)
- 2x 30" pieces and 2x 24" pieces of aluminum L frame
- 1x roll of thermal double sided tape to mount strips easily
- ~3 feet of red/black 14g stranded tinned copper wire for wago to wago connections
- ~8 feet of black 18g solid core copper wire for poking into strip connectors easily
- A bunch of 5 slot wagos
- 5-15p NEMA cord 18g
- Waterproof connector for power cord
- Total power: 313w tested from wall
- Efficiency: 52.9%
- PAR Watts: 165.57w
- PPF calculated: 808 umol/s
- Estimated PPFD @ 18": ~900+umol /m2/ s
- COST: $405.95 SHIPPED TO ME
say what ballast was bulletproof, so I will go this way, but with multiple drivers so I have redundancy if something fails.
going cmh, I wouldnt have been comfortable if I didnt have one spare of everything, this led build gives me lots of parts
to cannibalize during a failure. Hope your still around to tell about your experience with this. I am thinking straight samsung 301b
dual row 3000k. They have a board like that with red in it, but couldnt find anyone doing it.
Similar threads
