QB 96 wiring help

Im trying to wire two 96s parrael to the 320 driver. I can get one light working. Im having trouble getting the other light wired. Could someone explain to me how this is done I feel like an ishkabibble at the moment starin at this thing.

positive is coming from the meter to positive.... in light 1
negative to negative in light 2
light 1 and two are connected via the remaining opening ports. (negaitve light 1 to positive light two)

Im having the same problem w or without the meter so I'm assuming its my wiring and not a competent.

Thanks guys,
Creighton

whatever you doing is series wiring. if you wanna wire them in parallel take the positive one coming from the meter, get kind of wago connector to "split" the wire and when you get 2 wires, put it into the positive of both lights. do the same for negative.
in short, positive wire should be connected all lights to positive side, and negative wire should be connected to negative side of them

That's a constant voltage driver so you would use a parallel circuit.
pupuniko described how to do it. + to + and - to -
It also looks like the power meter isn't wired correctly.
Edit: after a closer look the meter is correct.

got it. im using the double wagos as a splitter. so I can fit the two positives coming from each light into one end of the wago. and the output from the driver into the other end of the wago. im assuming that's all good. its fits and I thin k it checks out... im going to plug in and test...