Stillbuzzin
Well-Known Member
dont lie u use candles and a picture chuck norris to grow with
You promised me you wouldnt tell . How you gonna act???????????????????
dont lie u use candles and a picture chuck norris to grow with
i use tin foil and the sunYou promised me you wouldnt tell . How you gonna act???????????????????
cut back in other areas change all lights in house to cflsnot sure i take care of my pops lawn he pays the electronic so i just wanted to make sure he wouldnt be abe to tell
If you pay $.11 per kilowatt, it would be $73.92 a month doing 12/12 on top of your current bill.Hey guys, I just moved in an apartment and my bill is usally $40-$50.. If I use two 1000w what can I expect my bill to be?
And is it to much where it looks suspicipus?
Besides the lights, consider your environmental controls like fans, inline intake/exhaust controls, this depends on the size of your grow and outside temps/environment but they can use as much power as your lights (or more in an extreme hot/cold outside environment). I went with LED's and they use less power overall than the rest of my environmental control devices. Buy low power consumption fans/exhaust/air conditioning etc.) or they'll jack up your power requirements considerably. I run a small 2'x4'x'5' cabinet and overall power usage is only about $50-$60/month over prior bills, certainly not enough to raise any flags but I'm also in an area that has variable cost hydro, lowest is at night so I run my lights during the night to further reduce the impact.If you pay $.11 per kilowatt, it would be $73.92 a month doing 12/12 on top of your current bill.
Electrical devices with AC-DC converters or electromagnetic motors often have a poor power factor unless corrected by a capacitor. Power factor is separate from AC DC conversion losses and will not affect your electric bill. Your meter calculates watts and ignores power factor but your wiring depends on the actual current which cannot ignore power factor. Luckily for us, digital ballasts are power factor corrected otherwise I would need a 220V line to run a pair of 600s.I have an LED light and it says "120vac 50/60Hz 125 watts 1.6A" on the and of the housing. That's great, except 1.6A at 120V is 192W, not 125. Likewise, 125W at 120V is 1.04A, not 1.6. Am I missing something, or is the power consumption really that underrated?