Possible phosphorus deficiency

I'm using BioBizz Bio grow, Do I use more of this to correct the phosphorus deficiency or do I use something with more phosphorus in it.
 
I don't think so, I don't know when they were planted but they were seedlings on the 24th of April
They were watered with 1/2 ml of biogrow around the 27th of May and 1ml of bio grow on the 6/6
 

MrStickyScissors

Well-Known Member
If your water is hard you can rin into alot of problems I had to get a reverse osmossis cause of hard water. If you cant check the tds of your tap water pour a glass on sum black plastic and when it drys if its hella white its all bad
 
what about the purple leaf stems? picture 1&3.
I'm using westland multi purpose compost with perlite (6:1 ratio)
I'm using tapwater and There was some water and dead leafs in the base of my propagator(made from green plastic.). I left it on the draining board to dry and the inside of it is white
 

MrStickyScissors

Well-Known Member
what about the purple leaf stems? picture 1&3.
I'm using westland multi purpose compost with perlite (6:1 ratio)
I'm using tapwater and There was some water and dead leafs in the base of my propagator(made from green plastic.). I left it on the draining board to dry and the inside of it is white
yeah you have hard water. it fucks shit up bad. get a reverse osmossis and watch your problems go away
 

MrStickyScissors

Well-Known Member
i bet your tap water is at like 500 ppms. thats what mine was at. and it fucked up a whole crop. you will think its other things. but start with the water
 
Just looking at a bottle of cheap water,

calcium = 110
magneisium = 24
sodium = 11
potassium = 1
Chloride = 20
sulphate = 24
nitrate = 0.2
ph = 7
Bicarbonate = 377
Total hardness = 386

Would that be alright to use or does that total hardness seem a bit high?
 

MrStickyScissors

Well-Known Member
Just looking at a bottle of cheap water,

calcium = 110
magneisium = 24
sodium = 11
potassium = 1
Chloride = 20
sulphate = 24
nitrate = 0.2
ph = 7
Bicarbonate = 377
Total hardness = 386

Would that be alright to use or does that total hardness seem a bit high?
sounds like tap water lol. I have a pen metter that reads tds and ppm on KCI and 442. bottled water wich is just R/O water that you buy in a bottle should have a tds of no more than 15. the highest iv seen is 32 and that was cause the water that was being cleaned was hella fuked up. just get a 5 gallon jug at wallmart there 7 dollars. go to the windmill thing and fill it up for 1.25 how much water do you need
 

Tamjee

Member
I was using only biobizz grow and had a huge phosphorus def. Was using RODI water and almost killed my plant. It was a momma so switched to an all purpose, concentrated fertilizer and problem solved.

I think I am running into the same problem using the complete BioBizz line; Alg-a-Mic, Grow, Bloom, and TopMax. Using all those at the levels recommended by the company, I believe I am still running low Phosphorus. I'm thinking of supplementing weekly the same all purpose fertilizer that I am using for the mommas, Miracle Grow Tomato Food at half strength (~600 ppm). Any comments?
 
Top