Oven baking for mold??? HELP PLEASE!

bigbrew

bigbrew

Well-Known Member
Dude,

Go to the bubblebags site and follow the advanced directions. On that sheet you will see a method for de-molding. Basically use your bags like normal, then take the product and throw it in a small mason jar full of water and shake it up. Then let it settle for 20 minutes. Use a turkey baster and suck up the crap at the top. The mold floats, the product sinks. Simple as that.... I have done this and the product is awesome.
 
T

topshelf

New Member
I have smoked lots of moldy bud in my life from mexico..but dont use that bud to smoke...You can only do one thing with it that i know of..SIMPSON OIL..and you have to use naptha as a solvent..we lost over 7 pounds to mold in 2 days..Throw it in the freezer as soon as you can(wet)..chop it up and make it just like they say..I give it to one of my people i grow for and she is in real bad pain(cant even walk,no legs)and she takes less then a grain of rice befor bed and sleeps 7 to 9 hours,befor that she would sleep only 2 to 4 hours and have to get up to take more pain pills...Do not lick the bowl..lol..I made that mistake with the first batch..go to utube and watch race for the cure rick simpson
 
4

420Alchemist

New Member
Schwag Bag said:
Ok so my entire crop has been affected by this gray mold crap, Botrytis, and I have read on the internet that after you harvest you can bake the marijuana with the mold on it in the oven at 300 degrees for 15 minutes and this will kill the mold.

I'm not trying to save it for smoking, I am trying to save it so I can make bubble hash out of it. Can this be done? Please help me, I can bake them right now if I have to!
Click to expand...
To note: you can kill the spores with the water cutting method, or by putting in freezer for a few hours, or 160 degree oven for at least 20 minutes... if you're decarbing to make edibles etc, this will be done already in your process ashtray. As for the aflatoxins... microwave for at least 45 seconds; completely destroyed and your thc and will Jermain perfectly intact... even safe to smoke at that point if you microwave and then water cure / freeze / heat. If you are using everclear wash method to extract you will already be super freezing and decarbing so... only real step to add is the microwave. Hope this helps.
 
4

420Alchemist

New Member
Schwag Bag said:
I mean seriously, if I throw it all away, I will be no joke throwing out POUNDS! That's why I wanted to atleast make bubble hash out of it! Its the gray mold/fungus Botrytis.
Click to expand...
To note: you can kill the spores with the water cutting method, or by putting in freezer for a few hours, or 160 degree oven for at least 20 minutes... if you're decarbing to make edibles etc, this will be done already in your process anyway. As for the aflatoxins... microwave for at least 45 seconds; completely destroyed and your thc and will Jermain perfectly intact... even safe to smoke at that point if you microwave and then water cure / freeze / heat. If you are using everclear wash method to extract you will already be super freezing and decarbing so... only real step to add is the microwave. Hope this helps.
 
Last edited:
Wizzlebiz

Wizzlebiz

Well-Known Member
Schwag Bag said:
I mean seriously, if I throw it all away, I will be no joke throwing out POUNDS! That's why I wanted to atleast make bubble hash out of it! Its the gray mold/fungus Botrytis.
Click to expand...
If you bake it at 300 degrees you will combust the thc.

If you dont bake it you will have a bunch of mold spores in your hash.

Either way it sucks and both are gross.
 
4

420Alchemist

New Member
Wizzlebiz said:
If you bake it at 300 degrees you will combust the thc.

If you dont bake it you will have a bunch of mold spores in your hash.

Either way it sucks and both are gross.
Click to expand...

160 degrees at 20 minutes is all you need to kill the mold spores... it won't decarb or even come close to "burning up the thc" or harm any of the minor cannabinoids until upwards of 220 degrees, for an hour or so, to decarb or "activate" the thc...
 
4

420Alchemist

New Member
420Alchemist said:
160 degrees at 20 minutes is all you need to kill the mold spores... it won't decarb or even come close to "burning up the thc" or harm any of the minor cannabinoids until upwards of 220 degrees, for an hour or so, to decarb or "activate" the thc...
Click to expand...
If there are aflatoxins present, microwave it... 30 seconds kills most of it. At 45 seconds it completely renders the alfatoxins insert.

And no- this won't damage the thc. Waste not, want not, and all that jazz! ;)
 
Wizzlebiz

Wizzlebiz

Well-Known Member
420Alchemist said:
160 degrees at 20 minutes is all you need to kill the mold spores... it won't decarb or even come close to "burning up the thc" or harm any of the minor cannabinoids until upwards of 220 degrees, for an hour or so, to decarb or "activate" the thc...
Click to expand...
I was responding to a comment about baking it at 300 degrees to kill the mold.

Still what your talking about is nasty.

God I hope your not a black market dealer.
 
4

420Alchemist

New Member
Wizzlebiz said:
I was responding to a comment about baking it at 300 degrees to kill the mold.

Still what your talking about is nasty.

God I hope your not a black market dealer.
Click to expand...
Smh - no. I'm not. Nasty? Well; drinking stagnant water, once treated with cleaning packets, is 100% healthy to do as well... yes- it can sound gross. But it's perfectly hygienic and safe so.... sorry you have a stigma over something sounding yuck.
 
4

420Alchemist

New Member
420Alchemist said:
Smh - no. I'm not. Nasty? Well; drinking stagnant water, once treated with cleaning packets, is 100% healthy to do as well... yes- it can sound gross. But it's perfectly hygienic and safe so.... sorry you have a stigma over something sounding yuck.
Click to expand...
In reference, of course, to survivalist packets for treating water
 
Wizzlebiz

Wizzlebiz

Well-Known Member
420Alchemist said:
Smh - no. I'm not. Nasty? Well; drinking stagnant water, once treated with cleaning packets, is 100% healthy to do as well... yes- it can sound gross. But it's perfectly hygienic and safe so.... sorry you have a stigma over something sounding yuck.
Click to expand...
Its fucking mold bro. I dont care if its a tiny bit or a pound of it. It goes into the trash over here.

Il also stay away from the stagnant water. Thanks.
 
4

420Alchemist

New Member
Wizzlebiz said:
Its fucking mold bro. I dont care if its a tiny bit or a pound of it. It goes into the trash over here.

Il also stay away from the stagnant water. Thanks.
Click to expand...
This was a discussion of someone whom could not afford to throw out all the stuff and was trying to find a way to salvage for personal use... some people aren't so privileged, to be able to just go buy new rather than salvage what they can... so was answering as such.
Same as water scenario - clearly if a bottle of fresh water is available and affordable to buy- then fuck the stagnant water. BUT if that's all ya got- then yeah- there's a way to make it safe for personal use, when needed.
 
Wizzlebiz

Wizzlebiz

Well-Known Member
420Alchemist said:
This was a discussion of someone whom could not afford to throw out all the stuff and was trying to find a way to salvage for personal use... some people aren't so privileged, to be able to just go buy new rather than salvage what they can... so was answering as such.
Same as water scenario - clearly if a bottle of fresh water is available and affordable to buy- then fuck the stagnant water. BUT if that's all ya got- then yeah- there's a way to make it safe for personal use, when needed.
Click to expand...
Your plan to survive is having a packet on you that cleans water??

Il boil it. Simple.

Buy new? Not sure what your talking about. I grow my weed. And have plenty from my previous grows where I mold happens il be good until the next plant.

Its not a privilege conversation.
 
You must log in or register to reply here.
Top