Oscillating clip on fans

Kushnblayzin

Kushnblayzin

Active Member
you could have the airline mounted to a stationary pump in the centre beneath the mounts for the pots and have the lines in such a configuration that would allow you to rotate 180 degrees in either direction that way rather than have it spin and get tangled it would spin and get a little intertwined and would then reverse and unravel only to intertwine again the other way. Alternately you could have a valve from the pump to the lines which would be attached securely to the pump but be able to rotate fully and the lines would not get tangled, picture a bottle cap fully tightened and then add a child safe medicine cap over this bottle cap, this configuration would be my preferred method.
 
justugh

justugh

Well-Known Member
well outside ppm of CO2 is 150ppm
inside ppm is 300 or higher

so inside is better for them during the light cycle ............but that fresh O it has been making all day is gone and has only the stale air inside to convert over and that is normal 12 to 22 % lower in O then outside air (night cycle)

both numbers are country (not to many cars wide open wind)

that filter box u pick the filter u can get a lvl 10 hospital grade cleaning ...............i also know of carbon scrubbers with built in fans u can hang they are refillable too usa made
 
Maphyr

Maphyr

Active Member
That low current in the soil sounds interesting. Way out of my league tho, I wouldn't know where to start with something like that.
 
Kushnblayzin

Kushnblayzin

Active Member
I'll look into it but I'd prefer to have the plants as opposed to a bunch of mechanical things to simulate nature as far as the fresh air goes. I have a filter I just don't have it up my plants are only 15 days old. Have I answered your questions? What do you think of my ideas do you think they are viable?
 
Maphyr

Maphyr

Active Member
justugh said:
well outside ppm of CO2 is 150ppm
inside ppm is 300 or higher

so inside is better for them during the light cycle ............but that fresh O it has been making all day is gone and has only the stale air inside to convert over and that is normal 12 to 22 % lower in O then outside air (night cycle)

both numbers are country (not to many cars wide open wind)

that filter box u pick the filter u can get a lvl 10 hospital grade cleaning ...............i also know of carbon scrubbers with built in fans u can hang they are refillable too usa made
Click to expand...
Your filter box idea, it's like a plenum in the HVAC field. Just realized that, :eyesmoke: It's a really good idea.
 
Kushnblayzin

Kushnblayzin

Active Member
Maphyr said:
That low current in the soil sounds interesting. Way out of my league tho, I wouldn't know where to start with something like that.
Click to expand...
Ditto! I'd have to have a place free from other people to attempt it in case a fire starts because the wires get moist and the water tracks it to the outlet or battery.
 
justugh

justugh

Well-Known Member
Kushnblayzin said:
you could have the airline mounted to a stationary pump in the centre beneath the mounts for the pots and have the lines in such a configuration that would allow you to rotate 180 degrees in either direction that way rather than have it spin and get tangled it would spin and get a little intertwined and would then reverse and unravel only to intertwine again the other way. Alternately you could have a valve from the pump to the lines which would be attached securely to the pump but be able to rotate fully and the lines would not get tangled, picture a bottle cap fully tightened and then add a child safe medicine cap over this bottle cap, this configuration would be my preferred method.
Click to expand...

well to make sure u have no issue u with it spining the roots are inside a muslim bag (used for brewing beer) and the air stone has to be on the bottom of that ........this ensures the air bubbles always get the goots and the root are happy

it is that connection i have to get to do 360 ......the bucket is simple ball baring rig on top then the turn table with a set of lines ........like the old fly wheel set ups in 1800 factories
 
justugh

justugh

Well-Known Member
Kushnblayzin said:
Ditto! I'd have to have a place free from other people to attempt it in case a fire starts because the wires get moist and the water tracks it to the outlet or battery.
Click to expand...
u would start off with getting a taser and then reworking the wiring .................lower the volts and the current

the planter is wired to that ....and the dish it sits in has been coated with that spray rubber 3 to 5 times over 3 days

the most effect way would be to put a copper plate bottom of the planter and then one up top with holes drilled to let water in and do it like u are jump starting a heart .......or just leave it on and mimic the constint one

sorry spelling and grammer gets worst as i get tired dyslexic
 
Kushnblayzin

Kushnblayzin

Active Member
Yeah I hear you man you would need one central pump powerful enough to reach all the pots if you were to use my idea with the caps (you do get how that would work right? it's just it's 7:40 am and I haven't slept so I'm sure I could have explained that better) you'd also need a smaller version of this to ensure the lines don't twist on themselves too, this one would connect them to the pots.
 
Kushnblayzin

Kushnblayzin

Active Member
justugh said:
u would start off with getting a taser and then reworking the wiring .................lower the volts and the current

the planter is wired to that ....and the dish it sits in has been coated with that spray rubber 3 to 5 times over 3 days
Click to expand...
I'll refer you to my location and remind you Tasers aren't very common here :D I'm sure there would be something I could use if I were to try it. I would say that if this were to ever surface as commonplace in the grow rooms worldwide it would be somehow implemented within the pots in some sort of sheeting or coil.
 
justugh

justugh

Well-Known Member
i know what u are talking about with child lock (made many of a houka out of my pill bottles )

ok thanks guys yah i am shutting up it is almost 3 am here my plants are hitting the off cycle i should do the same ...............check this tomarrow see what u got on that ..........if u guys think it is worth the effort i will post the spinning idea and the items see if some rich guy wants to try it out for us
 
justugh

justugh

Well-Known Member
Kushnblayzin said:
I'll refer you to my location and remind you Tasers aren't very common here :D I'm sure there would be something I could use if I were to try it. I would say that if this were to ever surface as commonplace in the grow rooms worldwide it would be somehow implemented within the pots in some sort of sheeting or coil.
Click to expand...
u can make a taser with a soldering iron and some resitors and the plan u can copy off the net ..............something like 15 bucks in parts from a radio shack............got bored and was making a shock glove to play around with
 
You must log in or register to reply here.
Top