Not Another Grow Journal

xox

xox

Well-Known Member
Laughing Grass said:
Wild how high you can push your ppfd with Co2
Click to expand...
co2 is pretty cool you can easily get 20%-30% more weight if you give them the right amount of light as well as feed them accordingly. i may actually be over feeding a tad you can prolly see the tiny burnt tips on the fan leafs. im always looking to see how far i can push them thats one of the reasons why ive been writing the ppfd down each week so i can refer back to it later. your next grow room build should get a small generator mines only a 2 burner its meant for a 10' x 10' space only cost me around 500 all installed but my gas line was super close only needed 2 feet of pipe.
 
Laughing Grass

Laughing Grass

Well-Known Member
Rollitup Advertiser
xox said:
co2 is pretty cool you can easily get 20%-30% more weight if you give them the right amount of light as well as feed them accordingly. i may actually be over feeding a tad you can prolly see the tiny burnt tips on the fan leafs. im always looking to see how far i can push them thats one of the reasons why ive been writing the ppfd down each week so i can refer back to it later. your next grow room build should get a small generator mines only a 2 burner its meant for a 10' x 10' space only cost me around 500 all installed but my gas line was super close only needed 2 feet of pipe.
Click to expand...
I didn't notice your ppm were so high too. Close to double what I'm pushing. I'm hitting just over 700 ppfd, 800ppm.
 
xox

xox

Well-Known Member
Laughing Grass said:
I didn't notice your ppm were so high too. Close to double what I'm pushing. I'm hitting just over 700 ppfd, 800ppm.
Click to expand...
my basements ambient is usually around 750-800 without co2 enrichment. im not sure what stage of growth your in but at co2 concentrations of 800 ppm you should be able to hit the plants with at least 1050 ppfd at the peak of flower if you work your way up to it. try increasing your ppfd 50-100 higher per week as you begin flowering so the plants will gradually get used to that amount of light. that should get you more weight come harvest time.
 
xox

xox

Well-Known Member
im finally out of trim jail lol, so my take on the lemon cherry sherb x permanent marker ill call it what it is over hyped. the two plants i ran one was a total runt. i bet i pulled less than an ounce off the one plant it also didnt turn purple. the other plant was picture perfect instagram worthy lol looked exactly like the photos of the strain but again low yield poor flower density really pretty weed tho but i wont be running it again.

1731083384656.gif

F039B508-948F-4EC0-8E84-989CB404CAA3.jpeg
platinum kush breath
E24961EC-A3E1-4A1C-984F-81D3EBEF8B08.jpeg
E18F782F-A350-483D-A90C-BE46763E401C.jpeg
CCD7034F-C5CB-47A4-9DC0-033660E74348.jpeg
black rainbow - lemon cherry sherb x permanent marker

74AACB43-79EB-4E29-8A87-58A122483001.jpeg
EBDEB5B7-9CBB-4D2E-8F18-30F58CF12CE3.jpeg
EAEB5B18-C825-48F5-91AC-7FDA1649F72D.jpeg
sugar cane
 
FmSwayze

FmSwayze

Well-Known Member
xox said:
im finally out of trim jail lol, so my take on the lemon cherry sherb x permanent marker ill call it what it is over hyped. the two plants i ran one was a total runt. i bet i pulled less than an ounce off the one plant it also didnt turn purple. the other plant was picture perfect instagram worthy lol looked exactly like the photos of the strain but again low yield poor flower density really pretty weed tho but i wont be running it again.

View attachment 5438442

View attachment 5438443
platinum kush breath
View attachment 5438444
View attachment 5438445
View attachment 5438446
black rainbow - lemon cherry sherb x permanent marker

View attachment 5438448
View attachment 5438449
View attachment 5438450
sugar cane
Click to expand...
Trim game top notch!
 
Farmer's Hat

Farmer's Hat

Well-Known Member
xox said:
im finally out of trim jail lol, so my take on the lemon cherry sherb x permanent marker ill call it what it is over hyped. the two plants i ran one was a total runt. i bet i pulled less than an ounce off the one plant it also didnt turn purple. the other plant was picture perfect instagram worthy lol looked exactly like the photos of the strain but again low yield poor flower density really pretty weed tho but i wont be running it again.

View attachment 5438442

View attachment 5438443
platinum kush breath
View attachment 5438444
View attachment 5438445
View attachment 5438446
black rainbow - lemon cherry sherb x permanent marker

View attachment 5438448
View attachment 5438449
View attachment 5438450
sugar cane
Click to expand...
The Sugar Cane has a nice structure. The flower looks really tasty.
 
xox

xox

Well-Known Member
Quack the Duck said:
Beautiful buds, what is your drying method?
Click to expand...
im pretty old school when it comes to that i only started using bovedas and moisture sensors last year before that i did it all by eye. wet trim, hang for 3-4 days, burp jars an hour a day until i hit 62% relative humidity with little sensors i put in the jar. then i weigh everything and put boveda packs in the jars and let that cure for the next few weeks.
 
xox

xox

Well-Known Member
Farmer's Hat said:
Have you made any fem seeds with that cut?
Click to expand...
id like to, i picked up all the stuff i need to make my own sts solution. i even scored a lab grade fridge for free that i can dial the temperature in to store everything properly it even has an alarm that i can set if it goes out of range its pretty cool i looked it up and brand new it would go for around $8000, i still need to pull a circuit for the fridge or rather add an additional outlet to an existing circuit for that. however i shit the bed last run i should have ran both lights. i was doing some math and i think if i make seeds this run ill run out of weed and i cant have that. so this run im going to do a large scrog with both lights and just run that cut. if i get enough weight to tide me over then ill prolly do a seed run.
 
Zogs

Zogs

Well-Known Member
xox said:
id like to, i picked up all the stuff i need to make my own sts solution. i even scored a lab grade fridge for free that i can dial the temperature in to store everything properly it even has an alarm that i can set if it goes out of range its pretty cool i looked it up and brand new it would go for around $8000, i still need to pull a circuit for the fridge or rather add an additional outlet to an existing circuit for that. however i shit the bed last run i should have ran both lights. i was doing some math and i think if i make seeds this run ill run out of weed and i cant have that. so this run im going to do a large scrog with both lights and just run that cut. if i get enough weight to tide me over then ill prolly do a seed run.
Click to expand...
In my experience pollen from reversing plants isn't as strong as regular pollination methods. I reverse a small plant or single branch. I do it in the same 3x3 tent with the rest of my grow and I haven't had any stray pollination that I didn't do myself. I'm pretty careful however, I check the plant daily when they start to open and collect and apply directly to the desired plant/branch. The pollen sac's have a look to them when they are about to open.
 
xox

xox

Well-Known Member
Zogs said:
In my experience pollen from reversing plants isn't as strong as regular pollination methods. I reverse a small plant or single branch. I do it in the same 3x3 tent with the rest of my grow and I haven't had any stray pollination that I didn't do myself. I'm pretty careful however, I check the plant daily when they start to open and collect and apply directly to the desired plant/branch. The pollen sac's have a look to them when they are about to open.
Click to expand...
id like to do something a bit larger than that i think, last time i made seeds i open pollinated the whole room just put a fan behind the male in the centre i still have seeds from back then they keep a very long time if stored in the fridge right after harvest.
 
You must log in or register to reply here.
Top