New setup help!!!

Ok so i am new to LEDs.... and also new to sealed rooms and co2 injection.......so my question....i have read and heard from other growers you want to run your temps around 85 when using co2 or its pointless.....i have also read some stuff about leaf surface temps which make alot of sense to me.....so what is you guys thoughts....alittle info on setup...5x9 room... sealed with panda film.... 2 of the lush lighting dominator 2x xl ~650 watt led fixtures....mini split ac.. 70 pint dehumidifier... more air than a hurricane well 2 hurricane fans and a 10" hyperfan scrubbing....... currently running about 80-81 degrees 44% humidity....oh yeah 4x6 flood table currently have 16 clones beginning to veg.....running floraflex nutes, orca, silica, cal mag, and mammoth p.....plants are healthy but i want them to thrive......also working on dialing in my flow rate on the co2 so i am having spikes of over 2000 ppm but have it set to 1000ppm......again my first time using co2 have the titan atlas 2 for control of that

For a tank CO2 use fuzzy logic mode and it will learn not to overrun the set point.

You do want a little warmer temps to use the CO2. Speeds up the plants metabolic rate. The proper balance of heat, light, co2, water and feed will result in rapid growth and increased yields.

Renfro said:

For a tank CO2 use fuzzy logic mode and it will learn not to overrun the set point.

You do want a little warmer temps to use the CO2. Speeds up the plants metabolic rate. The proper balance of heat, light, co2, water and feed will result in rapid growth and increased yields.

Click to expand...

Im not sure what you mean by fuzzy logic mode.....i think my spikes are happening from a leaky regulator....i bough oring today but still leaking i need to get a soap bittle out and find the leak