Need professional grower advice!!!

pulpoinspace

Well-Known Member
Ok good to know... I’ll ease off on the nutes by half dose and see what response I get out of it. Also my light has veg and bloom mode on it should I have both veg n bloom on or just bloom (all red) that’s what I’ve got it on now just bloom... when I started I have veg&bloom on together then once sprouted hairs I switched over to just bloom?!
Turn both switches on!!!

some "1000w" panels from amazon only draw 200 actual watts. and most of that is on the veg switch. those bloom switches are meant to be used with the veg switch to add more red to the spectrum. never by themselves. the bloom switch by itself is probably 50-100w tops which cant begin to grow anything in a 4x4.

turn both switches on. and add another light if you can. then your flowers will grow.
 
Identifying and recruiting a master grower is one of the biggest challenges and most important decisions for any cannabis cultivation start-up
 

Hydrotech364

Well-Known Member
I guess I need to start a thread on the proper way to SCROG. So many people just don't get it....... These babies need time and TLC.
 

Dr. Who

Well-Known Member
This thread is entertaining.....

Auto's can be fussy. Don't defoliate auto's. Hell, just don't defoliate, it's such a poor term and even more poorly applied.
Auto's and feeding? Gently does it!
Always start LOW and increase if you need.....After all, it's far easier to add more. Then to reduce from overfeeding, and burnt plants.

Also looks to be like she might be reacting to a pH problem...... Always check your pH with auto's and solution's pH's. Over 1 point away from optimal? Adjust!
Ca looks low, and advanced Mg def.
 

Jboy502

New Member
This thread is entertaining.....

Auto's can be fussy. Don't defoliate auto's. Hell, just don't defoliate, it's such a poor term and even more poorly applied.
Auto's and feeding? Gently does it!
Always start LOW and increase if you need.....After all, it's far easier to add more. Then to reduce from overfeeding, and burnt plants.

Also looks to be like she might be reacting to a pH problem...... Always check your pH with auto's and solution's pH's. Over 1 point away from optimal? Adjust!
Ca looks low, and advanced Mg def.
Ok great thank you I have digital ph meter and been keeping it at 6.2/6.3 level for soil. I’ve got another panel in tent that’s not on an is just full spectrum can’t switch between like my other panel so I’ll turn both one with veg and bloom on and see if she takes off
 

Jboy502

New Member
This thread is entertaining.....

Auto's can be fussy. Don't defoliate auto's. Hell, just don't defoliate, it's such a poor term and even more poorly applied.
Auto's and feeding? Gently does it!
Always start LOW and increase if you need.....After all, it's far easier to add more. Then to reduce from overfeeding, and burnt plants.

Also looks to be like she might be reacting to a pH problem...... Always check your pH with auto's and solution's pH's. Over 1 point away from optimal? Adjust!
Ca looks low, and advanced Mg def.
Thanks for the advice have any to give on nutes to fix just certain Deficiencies like Ca and Mg def
 

Jboy502

New Member
Turn both switches on!!!

some "1000w" panels from amazon only draw 200 actual watts. and most of that is on the veg switch. those bloom switches are meant to be used with the veg switch to add more red to the spectrum. never by themselves. the bloom switch by itself is probably 50-100w tops which cant begin to grow anything in a 4x4.

turn both switches on. and add another light if you can. then your flowers will grow.
Great thank you I’ll turn both on and other panel I got in there as well
 

Dr. Who

Well-Known Member
Ok great thank you I have digital ph meter and been keeping it at 6.2/6.3 level for soil. I’ve got another panel in tent that’s not on an is just full spectrum can’t switch between like my other panel so I’ll turn both one with veg and bloom on and see if she takes off

YUP pH issue is partially in effect. 6.7 in bloom and 6.5 for veg.....You only meter the in going solutions.
Run of is NOT the pH of the soil, it is the pH of the run off, period.

Soil self pH's to a point in synthetic use. If solutions are within a point of that 6.5 ... I would not adjust them.

Thanks for the advice have any to give on nutes to fix just certain Deficiencies like Ca and Mg def
G&H CAli MAGic would be my choice....
 

Jboy502

New Member
Great thanks I get the ph after I got all nutes and everything mixed for feeding... so with it in bloom I need to be at or around 6.7 no lower than 6.5 correct sorry if I not understanding fully
 
Top