Need help with light frame dimensions 3x3

hornedfrog2000 · Sep 22, 2016

I was hoping someone could help me with the spacing of my cobs, and the dimensions of my lights frame. Ill be running 8x 3590 over a 3x3 flood tray. I would assume id want the frame to be a little smaller than the table itself. I'm using kits from timber so i have thr ledil reflectors too... thanks for the help.

bseeds · Sep 22, 2016

3 2 3 lights 30x30 frame 10 inches apart center to center for outer rows put the 2 in the middle spaced between the first and middle row and other between middle and third row

BST · Sep 22, 2016

hornedfrog2000 said:
I was hoping someone could help me with the spacing of my cobs, and the dimensions of my lights frame. Ill be running 8x 3590 over a 3x3 flood tray. I would assume id want the frame to be a little smaller than the table itself. I'm using kits from timber so i have thr ledil reflectors too... thanks for the help.

Pinned heatsinks they can slide or be screwed in place. Hence extra holes

hornedfrog2000 · Sep 22, 2016

Cool. Thanks. Yep. Im using the pinned sinks too

BST · Sep 22, 2016

I've also found that I like smaller than bigger. Meaning if I need 8 cobs, two 4 light units is more convenient.

BST · Sep 22, 2016

On a side note, gorilla glue mounting tape. No drilling and sticky as hell. I've run a strip down a rail and you can slide cob.

VegasWinner · Sep 22, 2016

This was built and designed for a 3x3 space it is 18x24. peace

hornedfrog2000 · Sep 22, 2016

Any reason you went with 18x24? Should i be ok with 30x30?

Need help with light frame dimensions 3x3

hornedfrog2000

Well-Known Member

bseeds

Well-Known Member

BST

Active Member

Attachments

hornedfrog2000

Well-Known Member

BST

Active Member

BST

Active Member

Attachments

VegasWinner

Well-Known Member

Attachments

hornedfrog2000

Well-Known Member