Need Help With A New Light...

TheSadBadGrower said:

So I have a 5x8 flower room that I am upgrading my lights on....I do not know the specs of what chips are needed and drivers. I was looking to build a light with strips instead of boards. These are the strips and I am also using two 240 meanwell drivers. From the wall they pull 550 watts. My question is....would 2 of these be good enough for the 5x8? I use it for flowering only. Below is basically what I am getting but with 16 strips instead of 14. Each one flowers a 5x5 so I would assume 2 would be great for a 5x8. Any help would be greatly appreciated.


8 - 30x400mm Strips with 96 Samsung lm301b / lm301h LEDs
Each Strip has:
64 - 2700k Samsung lm301b
16 - 4000k Samsung lm301h
16 - 6500k Samsung lm301b

8 - 30x400mm Strips with 90 Samsung lm301b / lm301h LEDs plus Red & IR
Each Strip has:
58 - 2700k Samsung lm301b
16 - 4000k Samsung lm301h
16 - 6500k Samsung lm301b
4 - 660nm Deep Red
2 - 730nm Far Red(IR)
View attachment 4593407

Click to expand...

Airwalker16 said:

I've never seen this before. could you post a link to the website where you'd buy it?

Click to expand...

TheSadBadGrower said:

Custom Light Kit
8 - 30x400mm Strips with 96 Samsung lm301b / lm301h LEDs
Each Strip has:
64 - 2700k Samsung lm301b
16 - 4000k Samsung lm301h
16 - 6500k Samsung lm301b

8 - 30x400mm Strips with 90 Samsung lm301b / lm301h LEDs plus Red & IR
Each Strip has:
58 - 2700k Samsung lm301b
16 - 4000k Samsung lm301h
16 - 6500k Samsung lm301b
4 - 660nm Deep Red
2 - 730nm Far Red(IR)


16 - 40mm x 430mm heatsinks
4 - pcs 36" - 18ga 1/2" pre-drilled aluminum angle to connect the heatsinks
2 - pcs 12" - 18ga 1/2" pre-drilled aluminum angle to connect the 2 frames
30mm double sided thermal tape to apply boards to heatsinks
2 - Meanwell XLG-240-H-AB with dimmers
wago connectors for power and led hookup
10 ft heavy duty y-power cord for driver
20 feet of solid core 18ga wire to hook strips up
Screws for assembly



This is everything.

Click to expand...