Need help please!

autoflower 50 day old from seedilng super lemon haze . im wondering if they are ok? I need your opinions on the photos. because i think something is going wrong

Could be fading? how long is the strain 70 days?

Have you stopped feeding them? what kind of nutes?

They don't look bad just need a few weeks to fill out.

She looks hungry and it looks like shes still shooting out new pistils ... give her a light feeding to start and increase as needed. Shes also nearing the end and obviously towards the end the girl will be pulling all last bits of nutrients from the fan leaves and sending them to the buds. Shes still too early (again from as far as i can tell from the pics) for THAT much yellowing hope this helps. Btw more info wouod help us give ya better and more certain n accurate answer .... let us know avout temps humidity lighting medium feeding ajd watering schedules etc

Check out my new QuadStrain grow :
https://www.rollitup.org/index.php?threads/916619/
and my previous TriStrain grow :
https://www.rollitup.org/index.php?threads/883569/

i use all mix biobizz 14 l pot
i used fromm start all bio bizz line nutrients except alga, i use also bud candy

humidity is from 38% -48%
temperature 24-26 oC
i used botteld water with adjusting the ph with some lemon to 6,5.
i use nutes 2feed 1 water and i use bud candy alone.

imean alone separatly from bio bizz

and they say at ghs the starin is 9 weeks from seed

and i use this program here

can she be fixed so she can fatten her buds?

it's just nearing the end, only two or three weeks left, try the recommended light feeding. Some will put on their bulk in the last couple or three weeks

dirtWeevil said:

it's just nearing the end, only two or three weeks left, try the recommended light feeding. Some will put on their bulk in the last couple or three weeks

Click to expand...

ditto

what do you mean by light feeding?

one more pic from main bud its still thin i hope it get fats

oh and i forgot to mention that is indoor with 250 W HPS

illusionlies said:

oh and i forgot to mention that is indoor with 250 W HPS

Click to expand...

You have plenty of time for that plant to fatten up. Just by look you have more like 4 weeks left. What strain?

Just looked up autoflower SSH seems like all grow reports say 80-90 days total to be done not the 9-11 weeks they list. So you have 30-40 days. Give it some nutes at about 25% strength

looks like a higher sativa pheno, could take a little longer maybe, also sativas don't always fatten like an indica dominant one will. Light feeding means give it like a half strength or so dose of food if you haven't already

Its Super Lemon Haze auto. just got afraid of yellow leaves early

Alright brother .... It looks like youre doing things correctly for the most part. Like I said, most plants will get yellow towards the end although yours is doing it a little early perhaps......i noticed your humidity is very low for that temp. At these times, towards the end, little stress will exaggerate any little deficiency you might have, and may show worse on the plants! Raise your humidity to at least 60s (70s with goooood air circulations) right now So that the girls can drink and eat better ... high temps and low humidity lead to closed stomata on the leaves and reduced perspiration .... and THEN you can lower it to where it is now towards the very very end (when theyre done fattening up) so that the low humidity help stresd them and increase trichome production. When the humidity is very low for the temp, the girls cant eat or drink like they want to and deficiencies will show faster especially if the girl is fattening up n has high demands for those nutrients at the moment ..... this would be my guess right now. I suggest you try to keep your humidity as close to VPD as possible and read a little about VPD (Vapor Pressure Deficit) and watch her bounce back
Good luck brother and let us know how things go


Check out my new QuadStrain grow :
https://www.rollitup.org/index.php?threads/916619/
and my previous TriStrain grow :
https://www.rollitup.org/index.php?threads/883569/

DrCannaPath said:

Alright brother .... It looks like youre doing things can directly for the most part. Like I said, most plants will get yellow towards the end alittle early though yours is doing it a little early perhaps......i noticed your humidity is very low for that temp. At these times, towards the end, little stress will exaggerate any little deficiency you might have, and may show worse on the plants! Raise your humidity to at least 60s (70s with goooood air circulations) right now So that the girls can drink and eat better ... high temps and low humidity lead to closed stomata on the leaves and reduced perspiration .... and THEN you can lower it to where it is now towards the very very end (when theyre done fattening up) so that the low humidity help stresd them and increase trichome production. When the humidity is very low for the temp, the girls cant eat or drink like they want to and deficiencies will show faster especially if the girl is fattening up n has high demands for those nutrients at the moment ..... this would be my guess right now. I suggest you try to keep your humidity as close to VPD as possible and read a little about VPD (Vapor Pressure Deficit) and watch her bounce back
Good luck brother and let us know how things go


Check out my new QuadStrain grow :
https://www.rollitup.org/index.php?threads/916619/
and my previous TriStrain grow :
https://www.rollitup.org/index.php?threads/883569/

Click to expand...

70% humidity In late flower???? This sounds like and invitation for mold. alot of people use 35-40% humidity In flower. your temps are on higher end If you can bring temp down to 72-75f you would be In the perfect temp/rh zone imho.

lio lacidem said:

70% humidity In late flower???? This sounds like and invitation for mold. alot of people use 35-40% humidity In flower. your temps are on higher end If you can bring temp down to 72-75f you would be In the perfect temp/rh zone imho.

Click to expand...

I agree with you brother. Totally agree.
Humidity in the 70s late in flowering is like you said pretty much asking for trouble. His best bet is to LOWER the temps and increase humidity at least a little. My point was that for THAT high temps his humidity has to be that high in 60s n 70s. Attaching a vpd chart here for future reference.
I used to think running lower humidity in flowering is better. Its better only to prevent mold and to increase resin production towards the end. However, i learned that while the girls are actually growing and producing bud, you want the humidity to be within the good VPD range to allow the plants to breathe and thus uptake water.
So assuming hes keeping the temps that high, he has to raise humidity and improve air circulation to avoid mold. Or better yet lower the temps and increase humidity just a little since the girl is (i think based on the pic) still shooting out white pistils. Then later when she slows down and shes all fat, lower the humidity in the very last week to increase resin production.
I had this same issue very recently. The girls slowed down their water and nute uptake ALOT when the humidity dropped. I had to lower my temps a little and increase the humidity a little before they started drinking again.
Anyway sorry for the rant. Long story short OP should make sure the temps and humidity are within a range the ladies like and hopefully we see her bounce back

Check out my new QuadStrain grow :
https://www.rollitup.org/index.php?threads/916619/
and my previous TriStrain grow :
https://www.rollitup.org/index.php?threads/883569/

DrCannaPath said:

I agree with you brother. Totally agree.
Humidity in the 70s late in flowering is like you said pretty much asking for trouble. His best bet is to LOWER the temps and increase humidity at least a little. My point was that for THAT high temps his humidity has to be that high in 60s n 70s. Attaching a vpd chart here for future reference.
I used to think running lower humidity in flowering is better. Its better only to prevent mold and to increase resin production towards the end. However, i learned that while the girls are actually growing and producing bud, you want the humidity to be within the good VPD range to allow the plants to breathe and thus uptake water.
So assuming hes keeping the temps that high, he has to raise humidity and improve air circulation to avoid mold. Or better yet lower the temps and increase humidity just a little since the girl is (i think based on the pic) still shooting out white pistils. Then later when she slows down and shes all fat, lower the humidity in the very last week to increase resin production.
I had this same issue very recently. The girls slowed down their water and nute uptake ALOT when the humidity dropped. I had to lower my temps a little and increase the humidity a little before they started drinking again.
Anyway sorry for the rant. Long story short OP should make sure the temps and humidity are within a range the ladies like and hopefully we see her bounce back

Check out my new QuadStrain grow :
https://www.rollitup.org/index.php?threads/916619/
and my previous TriStrain grow :
https://www.rollitup.org/index.php?threads/883569/

Click to expand...

Its one of those many ways to skin a cat things. I keep my humidity at 40% all the way through flower with good results. Another great grower on here @afganking keeps his flower room at 35% through flower I believe with awrsome results.
thats what I love about growing.