Need device to manage 4 spectrum with lot of driver

hello guyz!
hope everybody is fine!
like it said i need a device to able to manage my sol strip https://www.cutter.com.au/product/sol-strip-br/
i still didnt find the right and good device for that
i have 4 different spectrum to drive:
1) nichia @5000k 97cri 48v
2) nichia @2000k 48v
3 )cree xd16 @3500k between 32 and 36 v depending on the drive current
4) cree xpe 660 nm between 24-29v depending on drive current

i will have 10 drivers to manage those 4 spectrum from 3 diferent strucure ( 2 for flower /1 for veg)
i choose the mechatronix euk version, its seems than they are dimmable.

4 x EUK-240S670DV * https://www.inventronics-co.com/product/euk-240sxxxdvtv/

4x EUK-096S350DV * https://www.inventronics-co.com/product/euk-096sxxxdvtv/

1 x EUK-200S560DV * https://www.inventronics-co.com/product/euk-200sxxxdvtv/

1 x EUK-150S560DV * https://www.inventronics-co.com/product/euk-150sxxxdvtv/

i heard about a " meshtek ligting controller " but i m not the best on electronic stuff :/
someone know a good way to manage dim and make my own sunset sunrise programation , if theire is a wifi option , ill be so happy!
good night /day!

Those drivers require the dim signal to be 0 to 10 Volts or 10v PWM. The wifi controlled Bluefish LED Controller dim signal is both 0 to 10volt and 10 PWM so your drivers should be controllable. It also can connect to a web cam for remote look-sees.
https://www.rapidled.com/bluefish-led-controller/

@Isawthelight really apreciate!!!!!!!!!!
you think one controler can manage 10 drivers?
i mean th is device is perfect for me, can handle the four spectrum of flowering room i have an d the 2 spectrum in thevegetative, perfect

grisbi said:

@Isawthelight really apreciate!!!!!!!!!!
you think one controler can manage 10 drivers?
i mean th is device is perfect for me, can handle the four spectrum of flowering room i have an d the 2 spectrum in thevegetative, perfect

Click to expand...

Bluefish has six channels. I do not know how many LED drivers can work on one channel of the Bluefish Controller (should do more than 1). I do not own this device. Here is the User's Guide link...Lucky you, the factory Initial Hardware Setup is 10 volt mode, so you don't need to open the case.
http://aquarium-led-controller.com/user-guide/#hardwareSetup

@Isawthelight thank youuuuu!!! <3

is that this device https://www.mouser.fr/new/ilumi/ilumi-meshtek-controller/ ??

• 3-Channel 0V to 10V Controller
  • Horticulture
  • Adjustable White Lighting
  • High input control voltage range of 10V to 24V DC
• 4-Channel PWM Controller
  • Multicolor Lighting
  • Device ON/OFF Control
  • High input control voltage range of 5V to 24V DC
• https://www.mouser.fr/pdfdocs/ilumi_MeshTek_SmartLighting_Controllers.pdf

@welight

this device i able to controle 4 channel amazing!! is that possible to put 2 driver by channel?
look very nice, would love to see the interface to controle that

and is theire bluetooth technologie is really working?