As a new guy here I felt like I may can show a few other guys how to setup the bubbleponics system as seen in the Roseman (I believe) thread. Here goes.
First, you need a tub. I happened to have an 18USGal rubbermaid tub. I'll be using it.
Second, you need some parts for the irrigation portion of the build. You need a submersible pump which in my case is a ~300gph fish pump that was in our saltwater tank that no long exists. I have an extra if we succeed with this attempt I will double my build.
You will also need an irrigation manifold. This is available at lowes on the isle with the all the plastic fittings and such for plumbing in my store. Notice the hose barb, this is a 1/2 inch hose barb that I found in the plastic fittings section.
Ziptie that fucker good.
Cut your holes out. I looked for a hole saw kit but struck out and wasn't sure of exact dimension of the hole so I didnt buy the 5" or 6"...I just scored and broke off the circle a chuck at a time.
Once holes are cut and everything fits, find a place for your manifold and pump assembly. Mine is going to be in the corner away from being directly below a plant.
...my dogs are not interested at all
Once everything is mocked up, your going to need grow medium in the net pots as you see fit and secure the lines within the medium so that the plant can intake its nutrients as needed.
I STILL NEED TO HOOK UP THE AIR PUMP, BUT I DO HAVE ONE!
First, you need a tub. I happened to have an 18USGal rubbermaid tub. I'll be using it.
Second, you need some parts for the irrigation portion of the build. You need a submersible pump which in my case is a ~300gph fish pump that was in our saltwater tank that no long exists. I have an extra if we succeed with this attempt I will double my build.
You will also need an irrigation manifold. This is available at lowes on the isle with the all the plastic fittings and such for plumbing in my store. Notice the hose barb, this is a 1/2 inch hose barb that I found in the plastic fittings section.
Ziptie that fucker good.
Cut your holes out. I looked for a hole saw kit but struck out and wasn't sure of exact dimension of the hole so I didnt buy the 5" or 6"...I just scored and broke off the circle a chuck at a time.
Once holes are cut and everything fits, find a place for your manifold and pump assembly. Mine is going to be in the corner away from being directly below a plant.
...my dogs are not interested at all
Once everything is mocked up, your going to need grow medium in the net pots as you see fit and secure the lines within the medium so that the plant can intake its nutrients as needed.
I STILL NEED TO HOOK UP THE AIR PUMP, BUT I DO HAVE ONE!
I Veg my girlz with a bubbleponics system and set my drip lines towards the top part of the rockwool. You can even nudge it inside the rockwool a bit if you want. I wasnt gonna take the chance of putting them on the bottom of the rockwool for fear of roots actually plugging your lines up, but its just a thought 
Once the roots hit your reservoir the feed lines up top are pretty much just extras because your plants will be eating/drinking on their own. Either way it should work out nicely for ya 
