Medium sized stealth shitfuckingugly room.

E

Exxact

Active Member
Hello!.

My name is Nönönö Nanana. This is my grow journal. Sorry for my broken english. I'll update this thread from time to time. This is first time growing anything at my whole life.

Setup:
-2x dimmable ballasts 250w-600w.
-lamps 2x250w mh. 2x 400w mh. 2x 600w hps
-160mm fan with controller + 200mm ec fan.
-Carboair 150mm/60mm/660 for blooming
-Prima Klima 200mm for vegging
-Budbox tent 3x1.5x2
-Shitfuckingugly room
- 65w lamp for mommy.
-2x nft gt604 and i have 2x gt205 but not using now
-Also made little bubblers to the nft res.
Also if you want to check my building topic heres the link:
-"https://www.rollitup.org/t/building-my-growroom.1008179/"

Firstly pictures from setup, and then to the point of my first grow.

3.jpg2.jpgMOMYCABLES.jpgEWFWEFW.jpgnimetön.gifnimetön.jpgOUTEREXHAUST.jpgOUTERINNER.jpgWEFWEG.jpg
 
Last edited:
E

Exxact

Active Member
Ph 6.0 ec 0.4 in both res. Looking good atm. At start i was struggling with the PH. I think cause was rockwools because i soaked them only about 30min and regular tap water ph ~7. So the PH was rising all the time, and the i used too much of a ph- and so on.

First time struggles =D.

Feel free to post and advice me, flame and bullying is ok too
 
E

Exxact

Active Member
werewr.jpg

Today switched MH:s to HPS:s and we will begin our flower. One month veg from clone. I had little problem from 'wind burn' took over week to figure it out, some of the leaves were curling down. Firstly i tought it was too low temp when lights off and started to troubleshoot it one by one, and finally figured it out. I have too powerful tower fan. Also bottom left exhaust hole looking like large asshole.

Also made two potentiometers for EC fan. One for the daytime (lights on) and one for the nighttime (lights off). So i can use diffrent speeds if needed.
 
E

Exxact

Active Member
Eugenios said:
I'll take a shitfuckinugly little room over having the growtent next to my bed ANY DAY OF THE WEEK! Merry Christmas and Happy Growing my friend.
Click to expand...
Thank you and merry xmas too!

MY OWN DANK said:
Awesome...the whole thing
How you keeping it cool or are the lights not putting off much heat?
Click to expand...
Most of the year where i live is pretty cold so 2x600w hps puts enough heat while on, but lights off temps drop below 18c.

I have heater element already and will start using it when needed. Also i have to buy air dryer. Merry xmas bro
 
Eugenios

Eugenios

Well-Known Member
Imcamping86 said:
That how I started my 4x4 next to my bed . It took up my entire room . Than I got a room for it and never knew the definition of silence ...... lol
Click to expand...
Hahahaha the fans wouldn't let me sleep at night. So I took them off and had the "tent door" open for optimal temps. The light was so strong that I couldn't sleep for more than 3-4 hours. I ordered a sleep mask from amazon and took 40 days to arrive for fuck's sake. I received it before Christmas thank God. My tent is a 2x2 though. I can't imagine having a 4x4 in my bedroom LMAO!
 
Imcamping86

Imcamping86

Well-Known Member
Eugenios said:
Hahahaha the fans wouldn't let me sleep at night. So I took them off and had the "tent door" open for optimal temps. The light was so strong that I couldn't sleep for more than 3-4 hours. I ordered a sleep mask from amazon and took 40 days to arrive for fuck's sake. I received it before Christmas thank God. My tent is a 2x2 though. I can't imagine having a 4x4 in my bedroom LMAO!
Click to expand...
Hahahah I had enough space to open the tent and walk to my bed.... lol and to think I had thought about adding a 2x2 lol for a perpetual grow lol
 
E

Exxact

Active Member
Flower day two
flower.jpg
close.jpg


Okkay everything is looking good so far.

I have been giving half of lucas formula (2ml B : 1ml M / Litre). EC-reading is about 1-1.1 mS. By the EC meter thats good dose. One grower wizard told me to use half lucas and its working very well.

Also took a picture of two potentiometer setup.

Potentiometer (R1) is working when lights are on and (R2) works when lights off. Very simple and in my opinion is very usefull. I can watch the highest and lowest temperatures from my thermometer and adjust potentiometers from the readings.

Not very good electric scetch but i kind of a improvised it at same time i pulled the cabel.

scetch.jpg
 
E

Exxact

Active Member
Week 4 looking good no problems.

Seedbank says this moby is very hungry and needs to have 1.5-2EC, but opposite is the case. 1.1-1.2EC is perfect
 
You must log in or register to reply here.
Top