MEDIDEDICATED

Trich shots in video form. Got plenty of amber on a lot of tops and through out. Chopping Saturday.

There ya have it. 5.4oz and 1oz cut before that along with about 6gs sampled before is about just under 7 oz like a quarter short or so.

It didnt take the whole 2.5x2.5 canopy so thinking I can get a ib off this strain. 14% rosin return on 5.4oz is 21gs rosin.

This rosin is the best I made let alone home sourced so keeping this. It did throw a few nanners after closely checking it all. It seeded but that didnt stop it from making good rosin.

I have 50/50 votes for it being a bad strain or it being my fault and worth running clones, it may stop. I messed up multiple things.

Will update thread with clones to review my new aerocloner. Running 2 of these in 2x4 and 2 in the 2.5x5. Setting up a veg tent for them. Perpetual clones. Harvest rosin every 10 weeks.

The Kongs Krush actually yielded 15% at the press too with higher temps. Lost 10gs rosin not trialing it out to make sure nothing can increase more yield.

It yields less flower though, like a qp less. Rosin tastes blah until I press higher temps now its so/so. It didnt nanner that I saw under same stress.

I will bonsai mother it incase this plant lets me down. Will still pheno hunt slowly along with intending to get rid of beans in another tent but thats another journal.

This hunt to start out is complete, I have two strains to get going. For now its watermelon ultra only, perpetual for a while.

Clone King with aquarium heater. Desk lamp its actually much dimmer in person not sure why its appearing so bright on camera. 50w forced air heater. Hurricane clip fan as the exaust.

This rosin is amazing, it looks rough but I dont judge looks because its better than the better looking rosin ive made. Cant keep my hands out the cookie jar! Cant wait til its all I can dab.

Oh wow! Im smiling!! First time using it and overnight they are perked up straight no dome! They look like theyre getting right to rooting!! Awesome because as time went on and making plans, the longer its been since I cloned.

So confidence was dropping and now its sky high like I am from the rosin from this strain!

Pretty much 100% success rate just one more to root but dont even need it. Aerocloners with aquarium heater are the way to go.

The other few cuttings are a different strain, kongs krush by green house seeds. Seem to be a nice breeder. It was completely limp leaning over the edge of cloner, bounced straight up overnight.

My last attempt root riot I pulled all the non rooted cuttings after 3 weeks maybe 4 and put in aerocloner. No water heater, no roots after two weeks or so.

The manual says water temp fixes it 99% of time. To expect 100% success. Its for real! Im hooked on aercloners now. It makes an important part of the perpetual grow work or else it wouldnt.

Pretty confident and will be suggesting this to people struggling to root cuttings, wish I knew this sooner. Also that pool shock keeps things fresh.

So theres more post harvest! Trim.. The kongs krush yields heavy sugar to make up for medium bud yield. Most of this is KK. I threw away half the WU trim for some suspect looking growth on it.

Neglected it and chaucked it up to that. There may be some on the trim I sifted but its something to keep eye on next time. Sift it asap.

A trick new to me I lay massager on my lap, one hand holds tray, the other crunches and shuffles the trim. This allowed for easily 3x more yield and above.

Keep throwing in a bag and back in freezer for 5-10mins repeat until most of it is done and much finer. The rest of kief probably wont fall off but should during edible processing. I grind to dust coffee grinder.

You want to avoid pushing impurities through so another reason not to over do it and leave some kief behind for edibles.

I did it in 71F bedroom but saving it for the garage in winter is best but after losing trim to suspect growth I rather process asap. Also for blonde kief/rosin.

This is just over 16gs kief. A step up from grinder kief being trim bin kief but its loud. Can see the color its pretty pure. Plus one for another quality vivosun product.

The rosin from this kief is great, starting to appreciate the art of bubble and sift rosin. Its notably stronger.

Turned the rest of it to sift rosin. Another 1.9gs just about. All from trim. Officially ready to be stored and consumed, final product.

Put it with the rest which I dabbed most of. 23% yield from 16gs sift. I think I lost yield from waiting a day to press the rest. It was open bag too. The first press was 32%.

A better look at it.

3x3 veg tent set up. Ignore the 4” pot in the blueprint photo, I decided remove that. The red x will be freshly rooted clones that I rather have early than be behind on. Aerocloning can go wrong, almost lost clones to browning.

So franticly trying again. About to do root riots too, just all effort to have clones. Probably will have extra ones that will have to be tossed but thats ok.

Grow cabinet is like my collection of most valued genetics as bonsais and one fully grown mother to harvest cuttings.

Will narrow it down to 4 strains. No more space left. Other than for a 2x2 for bean hunting and eventually to make/press bubble. Coming soon. No need for any other tents for quite a while. 30 square foot.

The bubbler outside the tent is great. Very efficient. Well done.

Surrounded by tents. New tent to the garden. 2x2. They all exaust straight outside, fresh air passive comes in through the door vent. Ready for a hot summer with no AC a lot of times.

Live with people that like to open windows etc so have to adapt. Sometimes they use ac the whole summer. Partly also that the bill spikes in summer so we all try to spare it.

This will start off with an auto until I get cloning down. I got cocky, the aeromethod is actually harder than I thought. Only hope I have is that I found the water heater to be off enough to be too cold.

I would like to dry sift and press rosin with this because my last try I made some bomb stuff. Very clean and potent compared to flower rosin. I dont think Il get the drying down with bubble and want to just jump straight to freeze drying.

Until then I just will make dry sift rosin which deserves its own tier. The stuff is notably different but still below bubble rosin or full melt. I havent had full melt but had hash rosin before. Steadily vape live resin though.

The real intent for this tent is to bean hunt when I get cloning down to where I can determine if a strain is simply not a good cloning strain. To which Id get rid of.

That cabinet is to hold 4 strains, I have two. A test site to rival the main spaces of which watermelon ultra dominates. To run multiple times before welcoming it to stay.

An overview of my whole garden and how it stands right now.

Mother cabinet 1x1’ 4 spots, 1 will grow fully
Clone tent 2x2x3’
Veg tent 3x3’ 4 clones 4 more early clones to stay ahead, all one gallon.
2x2’ flower tent one gallon 1 plant
2x4’ flower tent for 2 clones one gallon
2.5x5 flower tent for 2 clones one gallon

Perfectly healthy auto just popped. Im sad because I just realized I need to use the 2x2 for another WU clone if I want to likely hit my quota. It will just be in the way. Forbidden runtz auto FB.

I have 4 more seeds but wow I just have to see how this goes first. I flip next week, 5 clones, ib and a half 9 weeks on the dot, flip new clones. 70gs medium temp terpy rosin.

3gs per oz is a good underestimate. It easily spit out 4-5.6gs per oz. I should be using just home made with this method.

The 2x2 being for new strains will happen if I can confidently work it out with 4 clones giving me a new space. Until then I think this will barely do it.

That would be relatively quick going from the beginning of thread to now, that my goals are already met.

I thought itd be cool if I could go from 100% hash vaper store bought to home made in just a few months. No need to cut back or go back to flower.

I got 5 clones, this growers got a good 2 perpetual rounds ahead of him. About 1-2 months before worrying about the next round. Hopefully I find a solid method by then.

Flip. Lights go out this evening. 9 weeks from now should be ready to chop. New overview of whole garden.

What a freakin relief. Not exciting to yall but to me that I got the kongs krush to root which simply means I can toss the bulky 1gal mother and focus on my beloved watermelon ultra.

So cloning will be more organized just one strain at a time. This KK weed cures so notably easy, I can smoke it and give it away to smoke confidently. It locks in a cure easy. Smooth smoking.

I pulled out of root riot as enough time passed and was just checking for activity. It had nice mini search roots but not poke through the plug yet.

Putting it back surely was going to break roots. I tossed into the coco/pearlite pot dtw system and got roots. Never did that before.

I have a few that were in similar state not root yet. This took a week later, the others not poke surface yet.

I just couldnt get one to root soon as I needed it gone so Im full of joy. Took a few tries. So good to have a piece of that around. Now back to the pursuit of hash!

I have 13-15 cuttings of KK that at this point I am just testing to see how well it roots. It has not performed like the WU in rooting at this time.

New space. Now I can hold all 10 clones which is two perpetual rounds of 5 clones. Can stay ahead. Can use for something else when I see how this goes soon. Fully functional dtw veg tent.