Trippyness
Well-Known Member
Greetings,
Recently I decided to convert my Mars II 1200, which pulls around 520w give or take.
So what I did was replace the drivers with 2 Meanwell 2.1A Drivers running Vero 29 Gen 7 at 3000k CCT.
Will be running it in a 3 x 3.
As for reflectors I tried them, BUT it gave some serious dark spots on the outer edges so I removed them and I am much more impressed with the coverage in this small space.
I am pulling about 480W of COB which is around 505 or so total with driver.
My PPFD is around 966PPFD with about 20 PAR Watss a SQ/F.
This will be much better for my plants as I can actually see the damm things and diagnose issues if any.
Here are some pictures below ( sorry for the shit quality, waiting for a new battery when the Wife gets home).
Color is a bit off, they are a bit warmer but no where near as orange as a HPS.
Will upload some higher quality later on.
I did keep 2 original drivers to run the fans.
Also took the glass off for obvious reasons.
Any questions just ask.
Trippy
7
Recently I decided to convert my Mars II 1200, which pulls around 520w give or take.
So what I did was replace the drivers with 2 Meanwell 2.1A Drivers running Vero 29 Gen 7 at 3000k CCT.
Will be running it in a 3 x 3.
As for reflectors I tried them, BUT it gave some serious dark spots on the outer edges so I removed them and I am much more impressed with the coverage in this small space.
I am pulling about 480W of COB which is around 505 or so total with driver.
My PPFD is around 966PPFD with about 20 PAR Watss a SQ/F.
This will be much better for my plants as I can actually see the damm things and diagnose issues if any.
Here are some pictures below ( sorry for the shit quality, waiting for a new battery when the Wife gets home).
Color is a bit off, they are a bit warmer but no where near as orange as a HPS.
Will upload some higher quality later on.
I did keep 2 original drivers to run the fans.
Also took the glass off for obvious reasons.
Any questions just ask.
Trippy