LSD Auto, 2x2xtoo short tent.

Southernontariogrower

Well-Known Member
2nd grow, maybe my first successful one. LSD auto Norcal Farms

2x2 tent
Spider Farmer sf1000
AC Infinity temp and humidity control 4" fan w/ carbon filter on the outlet.
1500watt heater with a Rainbird hot/cool controller.
Bottle of yeast water for co2.
75~78F
52~47% RH
one fan under and one fan above the canopy

Coco/huge pearlite hempy bucket. 3 gal.
GH 3 part, just following the chart.



This was it 40 days ago.
Do you have heater plugged into regular outlet? 1500w is too much for 15 amp breaker, id run on med. Only, not high! Had fire from one so be careful. Started inside wall. Just dont run on max will be ok! If you put hose on diy co2 and let rain down on plants from top of tent, co2 heavier than o2. Dont open tent for at least 1 hr after lights on, waste all co2 buildup. If you do.Btw beautiful plants. Good going.
 

Roy O'Bannon

Well-Known Member
I gave up on the CO2, I circulate so much to keep the humidity down. I have the heater on low, I'm a electrician by profession though, I have two circuits for that tiny tent. Good call for sure I have an auto watering dealy as well, but I'm still changing stuff on it.

Wk15
yup wk15, of flower.
 

Attachments

Roy O'Bannon

Well-Known Member
Wk 17
ph was low in the runoff when I checked it before dumping. 5.4ish. I hand watered 1000ml of regular nutes ph'ed @5.9ish to get things corrected.
I have a lawn timer, auto watering thing, I put together. Works good, but it drips for 15min, instead of pouring 3-400ml at once.
Think I may need, to feed, by hand once every few days to flush potential buildups. Maybe not, but that's my theory atm.
 

Attachments

Roy O'Bannon

Well-Known Member
Wk 18. I was thinking that yellowing was the plant finally finishing. Maybe, but the ph in the runoff was still wanting to be 5.4ish. I'm feeding [email protected] it takes up almost nothing.
 

Attachments

Roy O'Bannon

Well-Known Member
I cut it down tuesday. Doesn't look like much. Rough wet weight 12 oz after finding mold in the 3 furthest from the fan.
I had 2 fans in there, idk, I was worried I had too much air flow, guess not.

Have it 66f and 50-60rh in the dark tent. Run the lower fan on a timer, 15min each hr or so. The ac infinity will vent over temp or humid, put the probes in between the flower hangs.

Here are the ones I am keeping, pulled them apart a bit and checked for mold, while using some drug store magnifying glasses. I kind of peek inside and make sure each day. First plant got mold on those dense buds as well.

Had some root problems at the end, I messed up and put a landscape fabric liner in the hempy bucket, know better now.

Also noticed the roots were mostly at the top of th coco and to the sides, almost nothing in the middle, solo cup to final pot didn't really get the chance to root real well.

Anyway. on to the next one. Will post dry weight when I know, Hoping for enough to squish for some rosin.

I'm going to grow more at once, and make bubble hash with all of it, next time.
 

Attachments

Roy O'Bannon

Well-Known Member
Came to 3.5 oz after drying and trimming and throwing 3 colas away.
Idk about the mold, making qwiso with it all. Don't trust it.
Put it in the freezer after drying a week.
 

Roy O'Bannon

Well-Known Member
So I tried a bit of the LSD plant after looking it over with a loupe and comparing to some medi flower I bought.

Smoke report? I wouldn't buy my own weed unless I was very broke:)

It was a bit green, but I smoked a bowl and got waaaay higher than I had planned. Also way more of a head high than I was looking for, but it tamed down after a bit. I may have had to take a nap.

Still bho or qwiso planned, just waiting for either solvent to arrive.
 
Top