Lowryder Dwarf Mix HPS & CFL Grow
- Thread starter Fyfe
- Start date
Fyfe
Well-Known Member
Cheers mate, yeh they should start in 2 - 3 weeks. we hopesLooking good Fyfe them are lowryder dwarf Mix Right??....wait till they turn 3 weeks and start to flower
Cheers Noobryder, what did you do then? over fert or water or something? infact i'l have a look at your journal later. its easier.
Hi AM/PM, thanks for dropping by, yeh those indie lookin leaves are nice, they get fatter everyday. i'l pop over your journal later.
Londoner
Well-Known Member
Morning Fyfe mate, hows it hanging?
Heres that LR2 that i grew last year after i was given a seed, 8.5wks of 18/6 from sprout-finish, under a single red spec 125w envirolite.
Finished about a foot tall and gave me just under an Oz dry, but you should get more because yours are LR crosses.
Heres that LR2 that i grew last year after i was given a seed, 8.5wks of 18/6 from sprout-finish, under a single red spec 125w envirolite.
Finished about a foot tall and gave me just under an Oz dry, but you should get more because yours are LR crosses.
Attachments
Fyfe
Well-Known Member
Morning londoner, Spot on this end mate, hows yourself?
thats a nice plant mate. did it grow like that or has it been trimmed back? those few bottom fan leaves are huge, then its just bud on top
to be honest mate, its my first grow and i would be happy if i got an oz beween my plants, anything over and its a bonus. it would be nice to get about 2 or 3 oz though to last me a while and keep me of this soap.
got a few pics from this morning i'l stick them up now.
thats a nice plant mate. did it grow like that or has it been trimmed back? those few bottom fan leaves are huge, then its just bud on top
to be honest mate, its my first grow and i would be happy if i got an oz beween my plants, anything over and its a bonus. it would be nice to get about 2 or 3 oz though to last me a while and keep me of this soap.
got a few pics from this morning i'l stick them up now.
Londoner
Well-Known Member
Morning londoner, Spot on this end mate, hows yourself?
thats a nice plant mate. did it grow like that or has it been trimmed back? those few bottom fan leaves are huge, then its just bud on top
to be honest mate, its my first grow and i would be happy if i got an oz beween my plants, anything over and its a bonus. it would be nice to get about 2 or 3 oz though to last me a while and keep me of this soap.
got a few pics from this morning i'l stick them up now.
Im great ta mate, gotta go work shortly though so thats bound to change
Yea there was the usual few yellowed leaves towards the end, so i cut them off for the pic as they didnt look pretty
But there wasnt that many leaves on it though, it had a high calyx-leaf ratio.
Wasnt that potent but the taste of it was great! Again though, yours should have more potency because of their genetics, LR and LR2 are notoriously weak in potency, but thats what these new crosses are supposed sort out!
Fyfe
Well-Known Member
Nothing exiting today, just a few pics of them by themselves and in a group.
Still growing under CFL's atm because my hps is at the sorting office and im not going to get chance to get there till saturday
still there not stretching and seem to be growing fine so im not to worried.
Still growing under CFL's atm because my hps is at the sorting office and im not going to get chance to get there till saturday
still there not stretching and seem to be growing fine so im not to worried.Attachments
Fyfe
Well-Known Member
i would love to no myself
my bulb blew on my on the test run, and my replacement is at the sorting office where i cant get to until saturday so they have been under cfl only for 2 weeks this weekend, is it two weeks already?
Fyfe
Well-Known Member
Yeh i really need to get off this comp and out into the digger but its proper p'in it down. so my mood is likely to change soon toIm great ta mate, gotta go work shortly though so thats bound to change
Yea there was the usual few yellowed leaves towards the end, so i cut them off for the pic as they didnt look pretty
But there wasnt that many leaves on it though, it had a high calyx-leaf ratio.
Wasnt that potent but the taste of it was great! Again though, yours should have more potency because of their genetics, LR and LR2 are notoriously weak in potency, but thats what these new crosses are supposed sort out!
I hope i get a lr and a lr2 just so i can see what there like to grow. to be honest mate, what isn't to potent to you will prob knock mew on my ass with me being so used to smoking soap
I really want to know what other strains are in there but no one knows. only the doc himself.
QueenBee
Well-Known Member
I think LR2 is potent, its better than most stuff Ive bought and Ive bought a lot of green! Lovely and crystally. Ive heard that the original LR is the real shitter, grows to the size of a lighter and its like hemp or something, crap basically,so I hope you havnt got any of those in your grow. Im a big LR2 fan tho!
Londoner
Well-Known Member
Lol yea any greens great in comparison to soap, doesnt really matter what it is tho, your own grown weed will always be great, you got the, i grew that factor.Yeh i really need to get off this comp and out into the digger but its proper p'in it down. so my mood is likely to change soon to
I hope i get a lr and a lr2 just so i can see what there like to grow. to be honest mate, what isn't to potent to you will prob knock mew on my ass with me being so used to smoking soap
I really want to know what other strains are in there but no one knows. only the doc himself.
Anyway heres those oil pics mate. Theres a couple of different batches there, each Pic is about how much you get from a honey bee full of trim and a few lower fluff buds, with two cans of gas put through it, trim/bud still semi wet and ground only slightly.
When i do my next BHO runs after the next harvest, il do a little video and email it to you if you want?
Attachments
Londoner
Well-Known Member
What you do is mate, fill the extractor with your trim/bud etc, fill it nearly full, but not too tight in there, then screw the cap on and tap it on a table a few times to settle the trim down by the cap.
You see the coffee filter type paper in the cap?
The hole in the top of the my extractor doesnt quite fit the nozzles on the gas cans, so i use one of the adapters that come in the cap of the gas pushed into the hole for a perfect fit
You see the coffee filter type paper in the cap?
The hole in the top of the my extractor doesnt quite fit the nozzles on the gas cans, so i use one of the adapters that come in the cap of the gas pushed into the hole for a perfect fit
Attachments
Londoner
Well-Known Member
Then when your extractor is full, youl need something to catch the gas/oil.
And something under to keep the bowl warm.
I use a pyrex dish as its glass and has a flat bottom which makes it easier to scrape the oil out, then i put that in a saucepan with some hot water from the kettle, this speeds up the evaporation of the butane, i fill the saucepan so the water line is just below the pyrex dish, so it just keeps it warm, if the hot water is touching the glass the heat can affect the potency of the oil.
Then just hold the extractor over the pyrex dish/saucepan of hot water, and squirt two cans of gas through the extractor, the liquid butane/oil after a few seconds will start to spray out the bottom of the extractor into the dish.
Be sure to completely empty the cans before removing them from the extractor, and hold the can on for 30seconds after the can is empty to hold the pressure in the extractor, then i blow through the extractor to get the last drops of gas out.
Then the gas/oil will start bubbling in the dish like its boiling, butane will evap at room temp, but the hot water speeds it up tenfold.
Then after 15mins or so the oil thats left behind can be scraped up with an old phone top up card or whatever, just dont use your cash/credit card as it sticks for ages then i just smear a drop or two onto my rizla and skin up as usual!
And remember to extract outside and dont smoke while doing it
And something under to keep the bowl warm.
I use a pyrex dish as its glass and has a flat bottom which makes it easier to scrape the oil out, then i put that in a saucepan with some hot water from the kettle, this speeds up the evaporation of the butane, i fill the saucepan so the water line is just below the pyrex dish, so it just keeps it warm, if the hot water is touching the glass the heat can affect the potency of the oil.
Then just hold the extractor over the pyrex dish/saucepan of hot water, and squirt two cans of gas through the extractor, the liquid butane/oil after a few seconds will start to spray out the bottom of the extractor into the dish.
Be sure to completely empty the cans before removing them from the extractor, and hold the can on for 30seconds after the can is empty to hold the pressure in the extractor, then i blow through the extractor to get the last drops of gas out.
Then the gas/oil will start bubbling in the dish like its boiling, butane will evap at room temp, but the hot water speeds it up tenfold.
Then after 15mins or so the oil thats left behind can be scraped up with an old phone top up card or whatever, just dont use your cash/credit card as it sticks for ages
then i just smear a drop or two onto my rizla and skin up as usual!And remember to extract outside and dont smoke while doing it
Attachments
Fyfe
Well-Known Member
mate your a star 
i dont like to waste things so any trim i get i want to make something out of, i'l get myself one of these and try it out when its ready.
Thanks for sharing mate.
so do you just out a little bi of oil on a skin with a cig in or do you add it to a spliff thats made? last question i think
HPS is in the cab now, woooooop!!!!
managed to catch the sorting office.
i had a little problem with my biggest plant, iv got them about 9 inch away from the light, its def not to hot for them (i sat with my hand under it for about ten mins) anyway it looked almost like it was swetting a little? it was a little wet on a few patches on the leaves? this was only after being under the light for an hour or 2.
when i woke up the damp patches have gone brown now
there only very small but iv moved the big plant away from the light more.
i'l edit this with pics soon.
i dont like to waste things so any trim i get i want to make something out of, i'l get myself one of these and try it out when its ready.
Thanks for sharing mate.
so do you just out a little bi of oil on a skin with a cig in or do you add it to a spliff thats made? last question i think
HPS is in the cab now, woooooop!!!!
managed to catch the sorting office.
i had a little problem with my biggest plant, iv got them about 9 inch away from the light, its def not to hot for them (i sat with my hand under it for about ten mins) anyway it looked almost like it was swetting a little? it was a little wet on a few patches on the leaves? this was only after being under the light for an hour or 2.
when i woke up the damp patches have gone brown now
there only very small but iv moved the big plant away from the light more.i'l edit this with pics soon.
Fyfe
Well-Known Member
i think it will be more than potent enough for me queen, i think i will have at least one original lowryder, as its made up of lr and lr2's in the mixed bag along with un released strains. whether i get a female though is another thing.
Fyfe
Well-Known Member
i didnt have but i do now, you think that could of been the problem?