Trippyness
Well-Known Member
Greetings everyone, been a long time since I posted here. Long story.
Getting back into a small closet grow, 14 square feet (7 x 2)
Planning on running the LM561 S6 bin Strips CC Variant.
What would be the best way to drive them. Looking at about
3 reels of 120SMD per meter for a total of 600 diodes driven at 0.1a (not the best effiency but I'm okay with that for now).
Reels themselves are 24v, looking like 8 SMD in series connected in parallel if I'm not mistaken.
What would be the most inexpensive way of driving these 3 reels.
Samsung calculator below for reference.
Getting back into a small closet grow, 14 square feet (7 x 2)
Planning on running the LM561 S6 bin Strips CC Variant.
What would be the best way to drive them. Looking at about
3 reels of 120SMD per meter for a total of 600 diodes driven at 0.1a (not the best effiency but I'm okay with that for now).
Reels themselves are 24v, looking like 8 SMD in series connected in parallel if I'm not mistaken.
What would be the most inexpensive way of driving these 3 reels.
Samsung calculator below for reference.