LED glow after switched off.

Caliverner · Oct 6, 2020

HydroKid239 said:
AHHHHHHH Bliss! lol

I know it's dope 200 on offer up

HydroKid239 · Oct 6, 2020

Can't beat that.

Caliverner said:
I know it's dope 200 on offer up

Caliverner · Oct 6, 2020

HydroKid239 said:
Can't beat that.

I don't think so

Jeffislovinlife · Oct 6, 2020

It is my 2000 watt @HydroKid239 went back to pulling the plug no power no light and I still don't know if it was the cause of the nanners just a thought as always thank you for your time and the best of luck

PJ Diaz · Oct 6, 2020

It's one of two things (in combination with the poor quality driver you're using): either you are using a timer not rated for LEDs, or your power is wired incorrectly with the hot and neutral swapped.

Hollatchaboy · Oct 6, 2020

Caliverner said:
Lol good guess

Nice!!!

PadawanWarrior · Oct 6, 2020

Jeffislovinlife said:
It is my 2000 watt @HydroKid239 went back to pulling the plug no power no light and I still don't know if it was the cause of the nanners just a thought as always thank you for your time and the best of luck

If your light isn't fully shutting off that can totally cause nanners.

MickBastard · Oct 6, 2020

Xcoregamerskillz said:
Good digital timers are fine too.

I second this. Where in the world are you? It makes a difference which electrical grid you're on. In NA it's important to remember that all circuits share a neutral. It's most likely your timer. Does it do this if you physically unplug the light? Do you have a Good multimeter?

I unplugged the unit for tonight. I’m on an 18/6 light cycle.

MickBastard · Oct 6, 2020

Caliverner said:
Yooo hydro guess what I bought lol

Mine is a Vander

PadawanWarrior · Oct 6, 2020

MickBastard said:
I unplugged the unit for tonight. I’m on an 18/6 light cycle.

What type of timer are you using? That would be my first guess. If it's a cheap timer, it might be letting a tiny bit of current through, and led's don't take much. I don't know.

Is it a decent timer like an Apollo?

printer · Oct 7, 2020

Found the thread on the timer and the leds glowing. Post #20 might be of interest.

Light Timer Woes (Power Leak when off) LED light

I am frustrated. I have ordered now two different light timers, an analog BN-LINK timer, and an ETEKCITY outdoor smart wifi controlled switched double outlet. First I tried the BN-LINK analog, sure the timer works but it leaks voltage, enough for the LEDs to be extremely lowly lit..I mean we...

www.rollitup.org

LED glow after switched off.

Caliverner

Well-Known Member

HydroKid239

Well-Known Member

Caliverner

Well-Known Member

Jeffislovinlife

Well-Known Member

PJ Diaz

Well-Known Member

Hollatchaboy

Well-Known Member

PadawanWarrior

Well-Known Member

MickBastard

Member

MickBastard

Member

PadawanWarrior

Well-Known Member

printer

Well-Known Member

Light Timer Woes (Power Leak when off) LED light

Similar threads