JJ's Marshydro fce 8000 grow
- Thread starter Jjgrow420
- Start date
Jjgrow420
Well-Known Member
@MarsHydrofactory !!! She's in! Still cleaning things up and getting the tent ready but I've got it in there and I'm impressed! Kill-a-watt don't lie.
Attachments
Jjgrow420
Well-Known Member
Wow, super impressed with this light so far. I can't get temps to go above 73. It's really insane how much less power I'm using now with cooling, fans etc. I'm only running 70% power and I'm 30-32" above canopy with par readings of ~450umol/m2/s across the board
Attachments
Jjgrow420
Well-Known Member
Things I've noticed so far.
-Hard to get a true level on the light. Have to get my lazer level out for a proper level.
-Cuts off top of tent. Much easier before to climb around inside the tent now with the light spread across the top makes for difficult access.
-hard to keep temps up. I've cut my cooling system off, turned fans down, turned off powered intakes, and still temps are low. Im gona try blowing the air down over the light and onto the plants for some more heat.
-plants loving the light. As soon a I put them in they started praying.
-Using way less power than with hid
-very uniform light spread with intense light penetration.
-Hard to get a true level on the light. Have to get my lazer level out for a proper level.
-Cuts off top of tent. Much easier before to climb around inside the tent now with the light spread across the top makes for difficult access.
-hard to keep temps up. I've cut my cooling system off, turned fans down, turned off powered intakes, and still temps are low. Im gona try blowing the air down over the light and onto the plants for some more heat.
-plants loving the light. As soon a I put them in they started praying.
-Using way less power than with hid
-very uniform light spread with intense light penetration.
smokey0418
Well-Known Member
A double pack of torpedo levels at depot and a little clear like one gifted from a friend for the light rail some hot glue resolved level moves for the 6500 I use.
A lift system definitely could assist in up and down movements for access inside a tent.
Great looking light and grow.
Jjgrow420
Well-Known Member
Ya I work in construction I have all the tools. Using the torpedo doesn't give an accurate enough result. Lazer level for the win
Jjgrow420
Well-Known Member
Thanks! Ya one produces ozone as well so anything that doesn't get touched by the light gets sterilized with ozone. I used to scrub the tent with Javex, then peroxide after but too much work. After disinfecting the tent smells super clean for a long time after and I think it actually deep cleans it better than spraying. Plus I was having issues with rust on the poles from spraying
bk78
Well-Known Member
Lift the light up, turn to 100% to get heat in there?
Jjgrow420
Well-Known Member
The higher it goes the more the heat gets exhausted from the top through the filter. I'm turning down the fan to the first setting and pushing the air down see if that helps
bk78
Well-Known Member
What exhaust you run?
Jjgrow420
Well-Known Member
420 cfm 6" canfan pro series w/vortex pro lite 550cfm can
Last edited:
PJ Diaz
Well-Known Member
You might consider putting the filter on the outside of the tent, and then run some ducting on the inside down towards the floor, so it pulls cooler air out instead of warm.
bk78
Well-Known Member
Good idea, I was thinking a $30 inkbird controller would do the trick as well to kick the fan off and on when triggers are hit.
Similar threads
