CobKits
Well-Known Member
Not that im aware of, but you can buy green monos
Introducing CobKits.com - specializing in DIY and Citizen COBs
Victor6634
Well-Known Member
How could I daisy chain a couple of clu0481818 builds is it possible ?
nevergoodenuf
Well-Known Member
@mypassion you can buy green led light bulbs at Home Depot. The are very bright for a 9 watt bulb.
I wanna use a led that I have and make it full cxb3590. I was thinking to run 2 times 4 cxb on MW1400 and find a green one to place it in the middle (9 clusters) but I will do 4+driver and 5+driver. I will try to build a in line hood for it, but it's a future future x5 project. We don't have home depot. Most consumables I can find, but the top tech stuff not so much.
Victor6634
Well-Known Member
Basically instead of 2 plugs you would plug 1 light into the other
nevergoodenuf
Well-Known Member
@mypassion when I have to work in my room at 'lights out', I always try to avoid shining the light directly at the plants. I wouldn't want that intense of a green light directly on my plants when the lights are out, maybe 4 diodes on stars in each corner, but that will be pretty bright also.
Rayne
Well-Known Member
I am just putting this out there... Under the section, "Thermal Interface Material." Do you have stock of Arctic thermal pads for the CLU 048 diode?
Personally speaking, I realize we can use the Arctic thermal pads for the CLU 058 diode with the CLU 048 diode if we cut some of the excess off.
Personally speaking, I realize we can use the Arctic thermal pads for the CLU 058 diode with the CLU 048 diode if we cut some of the excess off.
GroDank101
Well-Known Member
Hey. I'm wanting to run 8 cxb3590s at 36v and 1400mA in a 4x4. Should I use pin heat sinks, or the 5.886" profile from HS USA?
CobKits
Well-Known Member
@ 50W per cob any of the heatsinks on our site would be fine.
as far as the 5.886 HSUSA, youd need 3" of heatsink per cob if actively cooled ($5 per), or 10" per cob passive ($17 per)
the pinfins would outperform the hsusa in passive, but youd need a frame for them, whereas the hsusa is a frame (but you have to tap it! -nothing's free huh!)
as far as the 5.886 HSUSA, youd need 3" of heatsink per cob if actively cooled ($5 per), or 10" per cob passive ($17 per)
the pinfins would outperform the hsusa in passive, but youd need a frame for them, whereas the hsusa is a frame (but you have to tap it! -nothing's free huh!)
Thanks sir. If I will ever need it I will buy a bulb or better night vision
Airwalker16
Well-Known Member
You gonna offer any 3618's?
BM9AGS
Well-Known Member
Cree will likely be way more expensive!!
CobKits
Well-Known Member
100V cobs seem like an outlier. Youre the first person to ask about them
1825s are a better value in lumens/dollar at a given efficiency
at 160 lm/W
3 1825s = 22570 x 3 = 67710 lm
2 3618s = 24660 x 2 = 49320 lm
Airwalker16
Well-Known Member
It's cause your account is too new. You'll be able to soon enough just stay active.
Uberknot
Well-Known Member
where?