Indoor Grow Rooms

Ok, so I havent seen a post like this and If I missed it, mods please delete this post.

Ok, I just wanted to see what some of your guys grow rooms looked like so i figured... Make a post where people can post there grow rooms. So just post a pic, (or pics) of your grow room, and IF YOU WANT TO, give a little description of your setup. ok? Sounds cool to me, but again, thats just me. PEACE.

My Setup, Nothing special, one 75w grow flouro for now and lots of cardboard and some tinfoil, and a fan, only 2 soon to be plants at the moment.

400w hps fans 250 cfm intake/outake ebb&flow 8feet grow space.

this was a few weeks ago

i have a 400n hps lamp with a 12in fan and a 4in Extraction fan which is at the top of the closet



they are now in 5G pots but as i dont have a camera i cant get any more pics

1000w hps

12" oscillating fan

intake from outside w/ p.c. fan

5gal. buckets

hella mylar type stuff

Nobody likes this thread I guess, lol

.....or we are the only people here that have grow rooms.

oh well, i guess... i Tried..

hey guys, I am in the midst of setting up my grow cabinet. My mylar just showed up and I just went and bought 2 inline duct fans and will have pictures soon!!!.

let us know w/ some pics... cant wait to see waht u got goin on

heres my cabinet with hood and unfinished exhaust system on the hood I made, I just need to cut 2 holes in the back of the cabinet then put tubing to the fans which you can see is in that box.....I also have 2 mil Mylar to put in the cabinet once i get the venting done. I also purchased 4- 1"
PVC 90 degree elbows w/ screw on adapters, I am going to put the screw in part on the inside, then screw the elbow in from the outside making a tight fight that doesn't let light in.

heres a closer pic of the hood i made......


let me know what you all think.

Peace

311-G.

is that an hps light or no?? also if it is does it have an original hood around it w/ your made hood or is it just your made hood? because I have a lot of issues w/ heat and that looks like a good idea.... to put another hood over the original w/ cool air running to it

looks good so far

heres my vent....lol

The only other thing inside the hood I made is the reflector that it came with (batwing), I just cut a long narrow strip in the top of the hood to put the hangers for the light through, then used duct tape to seal that up. The peice of polycarbonate plexi-glass is removable for bulb changing.I am going to put the whole thing on chains so I can move it up and down.

The light is a 400 watt HPS, and I also have a 400 watt MH

I had the light on for about an hour and I could hold my hand right underneath it, and it was warm, but I wasn't going to get burnt.

Basement growing room with those "emergency camping blankets" (looks like frexible foil) and is cheaper than mylar) for wall cover, timer controled shop lite with gro-bulbs, oil filled heater with ocillating fan blowing over top of it. Also fan makes my girls sway and move to strenghthen stems, Vented outdoors with strong bathroom fan. Second grow now just going into flower. Seems to work well for me. Also, use a 5 gal camping jug with bottom spout to keep fresh water in. So far so good