In Aerocloner, best TYPE of cut on the bottom of clone?

OK, here are the different ways to cut the bottom of the clone using a clean razor:

1. Cut at a 45 degree.
2. Make a long slice, an inch or so, to the bottom to expose more surface area.
3. Split down the middle about an inch- double the surface area.
4. Make several nicks and cuts.

Which of these cutting methods work the best from your personal experience?

How did someone cut this clone to get such a crazy mass of roots??!?!?!

http://www.thcfarmer.com/forums/attachments/86091d1274990715-suggested-recipe-ph-aeroponics-cloner-clonex-2010-04-19_15.14.51.jpg.att

I cut at a 45 and then scrape the outside away.

Scrape the outside away? That's great! As in all of it- what an inch or more?

Sommersby said:

Scrape the outside away? That's great! As in all of it- what an inch or more?

Click to expand...

Just cut at 45 degree and scrape away a tiny bit of the skin on the stem and pop it in your aero cloner. Here is mine coming out the cloner ready for the aeroflo2 this is about 12 days in the cloner.

45 deg angle and scrape the outer stem...