Acerman
Active Member
600DE hps.
$600 budget.
IF you are new to LED and want help choosing what to buy, POST HERE!
- Thread starter SnotBoogie
- Start date
- Status
$600 budget.
Acerman
Active Member
This is part of my issue. do i get several smaller panels or a single do everything larger one.
OneHitDone
Well-Known Member
I think you are going to have a hard time outperforming your hps at that price point
Acerman
Active Member
The price is not a big issue. i would like to know what you guys recommend sans price. this will be a long term investment and i can justify a good light if it will preform.I think you are going to have a hard time outperforming your hps at that price point
REALSTYLES
Well-Known Member
Have you seen what I did to a Mars light lol and 500w CXB3590 vs 600w HPS= cobs for the win and you can make you I did. It's not as hard as some people think it is. Here's a pic of my 6500k DD bin veg 2x4 tent only running 60w from the wall and it can be turned up to 180w but it's summer and my AC and lights pop breaker lol
sixstring2112
Well-Known Member
i would say this is about as close as you will get to a 600de in your budget. but 2 x rows of 5 cobs would be even better in that space (2x6)
http://timbergrowlights.com/300-watt-cree-cxb3590-6-cob-kit-meanwell-hlg-power-supply-free-shipping/
you might be able to source the parts through plc to get closer to 8 cobs on your budget but idk,still dont leave much room for any kind of frame/fixture to hold them all together.
Grandaddy7
Active Member
Hey all!
Been reading around on LED lights for awhile and found this thread.
I'm split between 250w HPS and a Mars 300 or another 300 watt LED or if I have to CFLs again. I think I will be able to cool either light setup except my main concern is proximity to canopy.
As I put below my tent isn't very tall and the top 6" are taken up with cooling and the bottom 8" taken up by a pot. This leaves 34" for the light fixture, plants, and the gap between.
I have heard a variety of distances people keep their LEDs from 8" to 3'. Basically this answer will decide my light.
Currently:
Grow tent 2'x2'x4'
Strain: Northern Lights
4x3 gallon aeration pots, soil
Plan a short veg. Basically top once or twice, let them recover and flip.
I have an osculating fan for the canopy / light and I also have a carbon filter with a 96 cfm exhaust fan. This cycles the tent around 6 times per minute which is above the recommendations I have read. Hopefully this should be sufficient cooling, can pickup another fan.
Trying to keep the price $100 or under. Found mars for around 70. HPS for 82. \
Thank you!
Been reading around on LED lights for awhile and found this thread.
I'm split between 250w HPS and a Mars 300 or another 300 watt LED or if I have to CFLs again. I think I will be able to cool either light setup except my main concern is proximity to canopy.
As I put below my tent isn't very tall and the top 6" are taken up with cooling and the bottom 8" taken up by a pot. This leaves 34" for the light fixture, plants, and the gap between.
I have heard a variety of distances people keep their LEDs from 8" to 3'. Basically this answer will decide my light.
Currently:
Grow tent 2'x2'x4'
Strain: Northern Lights
4x3 gallon aeration pots, soil
Plan a short veg. Basically top once or twice, let them recover and flip.
I have an osculating fan for the canopy / light and I also have a carbon filter with a 96 cfm exhaust fan. This cycles the tent around 6 times per minute which is above the recommendations I have read. Hopefully this should be sufficient cooling, can pickup another fan.
Trying to keep the price $100 or under. Found mars for around 70. HPS for 82. \
Thank you!
Resinhound
Well-Known Member
Dude you picked a hard strain for cramped quarters NL is notorious for its flowering stretch, count on it ending up 3x the height you flip at.
ttystikk
Well-Known Member
A year ago, I first posted in this thread looking for information about COB LED.
I wanted to buy a bunch of modules so I could play with various configuration options.
I chose Meanwell drivers and Cree CXB3590 chips, I run them at very nearly 60% efficiency and I paid less than $3.00/PARW.
I think I did well. What do others think?
I wanted to buy a bunch of modules so I could play with various configuration options.
I chose Meanwell drivers and Cree CXB3590 chips, I run them at very nearly 60% efficiency and I paid less than $3.00/PARW.
I think I did well. What do others think?
mauricem00
Well-Known Member
with LEDs you need to keep them a foot or more above the canopy to prevent LED burn. with your limited vertical space have you considered these http://www.ebay.com/itm/2-T5-TEK-FLUORESCENT-GROW-LIGHT-WITH-6400K-VEG-or-3000K-BLOOM-BULBS-24-Floro-/161591009852?var=&hash=item259f93223c:m:mg_xVWSPEGBFQXQWPpPw6VQ I have used 2G11 CFLs before in small spaces and they work well.more effiecient than CFLs or F24T5HOs and they can be placed 2 or 3 inches above the canopy and still provide good light distribution without burning plants. completed 6 grows with them before moving to a larger closet and switching to 4 ft T5HO fixtures.
nextlight, fluence with small diodes will easily handle clearance of a few inches.
Smaller les cobs (23mm and smaller) run at low currents can also handle clearance of a few inches and provide the even coverage distribution like a T5HO fluoro AND run at a much higher efficiency. I run a bunch of vero18s at 500ma, saving me about 30% in electricity over the T5s I replaced.
Big smo
Well-Known Member
I'd definitely do some cobs instead of Mars. Or if it's to late rip the guts out of the Mars and add cobs in its place. I have some 3590's dimmed due to height, not ideal cobs but it works. Like purple said smaller cobs run softer would actually be cheaper than the bigger ones and fit well in your space. Anyone know if timber does anything else besides the 3590's? Would be smart if he offered different options in a broader price range for people not willing to DIY
kaydeezee
Well-Known Member
It's too late u already purchased 2x marshydro300 and a wyzm 150. I did originally buy them to replace my 600watt hps in my 120x120x200 tent but havent got the room anymore due to a new addition to the family. I have been checking out about building my own led system but for now I will make do with what I have and try document the results. STAY TUNED.
StevieBevie
Well-Known Member
so for a 4x4 or 5x5 what do you have?
Last edited:
Stealthstyle
Well-Known Member
Sounds good smart growtech and i dont mean to sound snarky but i hope you are paying for advertising on here. And none of these alternatives to mars type or cobs seem to be available in Australia. Ill stick with cobs. im happy with mine so far.
abe supercro
Well-Known Member
like how lightweight they look stacked.
contact riu about advertising, you'll do better in the long run.
contact riu about advertising, you'll do better in the long run.
- Status