ICE WAX (bubble hash) with Matt Rize

FOG99

Member
065.jpg From my friend's Outdoor Dairy Queen And Chernobyl. 45-120 micron. Not very oily. Trim was dry and dusty as hell. Stoney medicine though!
WP_000908.jpg
 

FOG99

Member
If you are not going to fully climate control a room for drying then your IWE will retain a little water and not be perfect.`Its costs money to do shit right.

Any chance you could share a temp and humidity range???

I have a problem than my chernobyl is gummy as hell. wont grate for shit, even after 24 hours drying and/or freezing. It instantly gums up with the slightest touch or friction. Any sugestions???

The 120, 90 and 73 are all gooey, especially the 120.

I am guessing my 70 degree environment and 50% humidity are causing a "shell" to form on the hash patty thus locking in the moisture. Thanks for any input.
 

montanachadly

Active Member
Mr Rize I went to the cannabis cup in amsterdam this last week and must say that the europeans should really look into your way of making hash. The Greenhouse had some full melt stuff that everyone was hyping up hard saying it was 99.9%thc bullshit i called. I tried telling them it just had moisture in it thats why it wouldnt stop bubbling. But these europeans are pretty hard headed so i was like fuck it man i make better hash than that. The Sharkberry cream that won the first place was black i should take a picture i brought a little back with me to the states in my bag. Anyway the first rip would taste good the second rip tasted like shit. Once those Euro's figure it out then it will be worth it to pay the hash prices. Shit if i could have taken some of my hash over there following your method that shit would have won or should have won hands down. Just wanted to say all that.
 

Subbie

Active Member
Hey Matt wanted to let you know I picked up some of your 73 purple mr nice guy at CCA, great stuff! I simply take a pinch off, hold it in my fingers a moment so it sticks and dab away. I can now compare your fine work when I make my own, seeing I'm just learning it gives me an example of the best to shoot for.

Thanx!
 

ENDLSCYCLE

Well-Known Member
Is there a good way to wash bags after use??? Could I hand wash in a mild detergent then rinse really good???
Made a run over the weekend, washed with warm water and let hang dry.......well....my bags smell like death...lol
 

poplars

Well-Known Member
Is there a good way to wash bags after use??? Could I hand wash in a mild detergent then rinse really good???
Made a run over the weekend, washed with warm water and let hang dry.......well....my bags smell like death...lol


flip them inside out, dip in clean water, flip again.
 

Mohican

Well-Known Member
I used washing machine and oxi-clean on gentle and then dried in dryer using delicate setting. Worked great :)
 

Kalyx

Active Member
Turn em inside out, blast with cold water (I use my shower and it works better in winter), shake dry, hang in a manner that they completely dry. ie not all on top one another. And avoid anything fuzzy at all costs!

When they gum up I use high % ISO alcohol in a cookie sheet and a brand new plastic bristle sink washer and gently scrub them back to actual micron sizes!
 

SpliffAndMyLady

Well-Known Member
Hello all...I just want to say that this thread is so inspirational and I am learning everyday thnx matt and everyone. I just bought a bubble magic machine and it came with the 220 filter wash bag. I zipped it up and used it on my first run and it opened up which kinda ticked my off. I saw matts video on you tube and he says to zip it and double knot it. I zipped the bag but it's two ties it has sown on are on the top of the flap instead of inside the flap next to the zipper ending, I was wondering if it's a design flaw cause I cannot seem to close the bag. If it is a flaw...does anybody recommend a good wash filter bag and what brand. I heard those pyramid filter wash bags are good, maybe the zipcro one.
Just bought a bubble magic 20gal and my bag came like this also and opened up on my second run. I emailed the retailer and they told me to contact the company then they gave me the run around. Just ended up sowwing the crap outta it to make sure it wouldn't open, worked for me. Just letting you know you ain't the only one I guess their was a bad batch? Good luck!
 

SpliffAndMyLady

Well-Known Member
Is there a good way to wash bags after use??? Could I hand wash in a mild detergent then rinse really good???
Made a run over the weekend, washed with warm water and let hang dry.......well....my bags smell like death...lol
Perks of having a bubble magic is its a "washing machine". So not only does it do the work for you it cleans your bags after too, but I usually just house them out washing them through a machine would wear them out faster over time.
 

GrowBrooklyn

Well-Known Member
I rinse the bags in cold water right after use and then hang them to dry. Every third or fourth use, I put the mesh part in a shallow bowl with iso and gently rub the mesh with my fingers wearing gloves. Takes like two minutes per bag.
 

ENDLSCYCLE

Well-Known Member
I guess first off let me say they are new bags with only that one run through them....washed all again last night in warm water....let each one individually hang dry...well....they still stink....the smell i dont think is from bud and trim...the smell is the bag itself...like the smell of fresh rubber or some shit....what's weird tho is they didnt smell before the first run and the smell didn't leach any weird taste into the hash cause it's some straight full melt with the smoothest taste ever...no weird after taste or anything....I think I'm gonna take a chance and wash em with some warm water and detergent then rinse the shit out of them....I'll report back tomorrow hopefully with some good smells...haha


And I'd be careful using iso on cheap bags....did this before and straight ruined them....the cheap bags I had were so cheap that to make the bag itself water tight they were coated in wax to fill all the little pores in the material.....horrible design.....wanted to get some PureHeady bags but couldnt get any locally...these new bags I got tho(Micropore) seem to be legit...and....the shop I got em from said if I didn't like em I could get refunded or get store credit so I jumped on em.
 

trichmasta

Active Member
I need a new machine bag before I can do a run...don't want waste or jeopardize my extraction with the shity bubble magic bag! Sucks an item like the would be probably impossible to find in town...
 

erocoe420

Member
Just bought a bubble magic 20gal and my bag came like this also and opened up on my second run. I emailed the retailer and they told me to contact the company then they gave me the run around. Just ended up sowwing the crap outta it to make sure it wouldn't open, worked for me. Just letting you know you ain't the only one I guess their was a bad batch? Good luck!
I had that sewing thing in mind as well, but how I ended up getting around this was I actually ghettofied it...I got a small heavy black paper clip I was using for my outdoor to tie the nugs down with string and used it to locked the zipper part where it will not move around in the washing machine. I can add a photo of the process if requested. Good stuff.
 

erocoe420

Member
For the Bubble Magic Washing bag that comes with your washing machine, it opens up and you cannot double tie it, it's a design flaw, probably from china no disrespect on countries. To get around the bag from opening up...I used a heavy duty small black paper clip toward the back part of the zipper to lock it into place so it does not open up. It worked for me and now I have no trim in my 160 micron bag, yay!
 

poplars

Well-Known Member
zipcro bags on aqualabtech are good, I've had the same one since last year and it's been through over 40 runs, its a strong bag and not too expensive (35 bucks I believe..)
 

Grindin8732

Well-Known Member
Great thread man, just started making ice water extracts a couple weeks ago and love it! What kinda price range are them revere glass pieces you was showing? Wanting to get a smaller shower head perc rig to dab withbongsmilie
 

trichmasta

Active Member
So do you guys dry right outta the bags with a paper towel? Or do you just let it wick out on its own before the chill and microplane? Don't really recall this aspect being covered throughout this dope ass thread!! One of my favs on riu...:mrgreen:
 

jaydub13

Well-Known Member
Well, I tried the search option for the thread but nothing came about.

I know a lot of you out there have had a delicious beverage from Sonic... the fast food joint. I noticed the other day they sell their ice for like a $1 for a bag of it. It is really fine crushed ice balls, maybe some of you know what I am talking about. Has anyone tried this type of ice for extraction? Seems like it could possibly get into the trim/bud a little better than big chunks? Or maybe a combo of the two? Not trying to divulge from your teachings Rize, just curious if there may be some benefit to this type of ice? Thanks, DUB
 

Grindin8732

Well-Known Member
heres a couple shots of the Moby Dick Auto extract i made, thats 45-73micron if i remember correctly:mrgreen: i only make a gram or two at a time so i dont microplane, just sit out overnight then keep breaking the pieces up smaller and smaller over the next couple days
DSCN1899.jpgDSCN1900.jpg
 
Top