[How To]: Butane Honey Hash Oil (Videos and Pictures)

Benassi

Well-Known Member
link didn't work for me! coming up error
Their webby must have crashed, was working a second ago then I clicked next page and got error'd

As for the "nectar"... it's just really pure dehydrated stable budder... BHO

All these special names they give things like Delta 9 and NECTAR or GOLD is just a selling point for the maker until someone finds out their tek on making the same ol' BHO that they've tried to keep secret so they can continue making $70 per gram. All those BS things are just different teks with BHO that someone tries to keep secret for aforementioned reasons
 

ENDLSCYCLE

Well-Known Member
Got a question....got my tube in and did two runs with Vectra....didn't yield much but I think that's cause I didn't pack it tight at all....just kinda loosely filled it and gave it a little press with my finger and then did the runs.....my question is this....what oil I did harvest is rock fkn hard.....WTF????never was creamy after the scrap....I scraped it off and stuck it to the side of a shot glass and then put that in a bag....like I said....rock hard....do I have to heat it to make use or what???


Edit.....oh...and that FDD dish you got and posted on Sr.Verde's thread is beautiful....especially with it filled:)
 

Benassi

Well-Known Member
Got a question....got my tube in and did two runs with Vectra....didn't yield much but I think that's cause I didn't pack it tight at all....just kinda loosely filled it and gave it a little press with my finger and then did the runs.....my question is this....what oil I did harvest is rock fkn hard.....WTF????never was creamy after the scrap....I scraped it off and stuck it to the side of a shot glass and then put that in a bag....like I said....rock hard....do I have to heat it to make use or what???


Edit.....oh...and that FDD dish you got and posted on Sr.Verde's thread is beautiful....especially with it filled:)
Post a picture if you can... it seems like you ended up with shatter. Usually happens when the oil is cooled too fast either in pyrex or out. Still good though, and some people prefer it. You can break pieces off or work it with your fingers until your finger heat softens it up and gets it more workable. If it's not stable to the touch then very briefly pass your dabber under torch flame (by briefly pass I mean 1 second exposure time) and then it will pick up your shatter. After I put my oil from the parchment paper into the FDD dish it cooled down and turned to shatter (until I heat it up).

Keep your pyrex warm from the first hot water wash up until your initial purging. I keep the oven on at 170 while I do my extraction just so I can quickly toss the pyrex in or the PP in their to keep the oil molten. Also doing the extraction in the warm sun helps as well, too.
 

ENDLSCYCLE

Well-Known Member
Ok.....makes sense.....did the process outside at 30*.....the fkn butane dissipated real quick.....like in about a minute.....I was shocked at how fast.....really didn't bubble at all....I probably should of had the pyrex sitting in the water bath from the beginning.....when the butane hit the pyrex it frosted the glass right away....then took it inside and threw it in the oven after poping the bubbles to release the rest of the butane...let sit in the oven for about 7-10 minutes then let it sit on a heating pad on high for another 30..........hope next time goes well!!!


First run on the left....second on the right..........the right one did get a little darker tho.
 

Benassi

Well-Known Member
Have you dab'd some yet? I can't tell due to the shot if all those bubbles might be tane but if it sparks when you smoke it... make sure to throw it on the pyrex and purge it more. Other than that, nice yellow sap ya got there. Looks pretty good :D

How much did you run? what was the yield?
 

ENDLSCYCLE

Well-Known Member
no....haven't tasted it yet....so....take it out....throw it back on some pyrex and throw it back in the oven......175 for about how long?????
I did heat up the paperclip that I used to gather the honey off the razorblade and yeah.....little sparkles....I was aware of the little amount of tane still left in but just thought it was too late!!!
 

Benassi

Well-Known Member
It's never too late to purge... only sometimes too late to keep it as an oil. You will most likely, end up with earwax/ budder but it's all good.

Take your oil and put it on the center of your pyrex. Get a pot of water and bring it to a rolling boil on the stove and set the pyrex on top of it. Let the heat of the boiling water melt down your oil, then take a paperclip and start whipping it around and smearing it back and fourth. Stop when it either starts getting dehydrated and looks like soap (thc budder) or until all of the bubbles stop coming through (earwax). Some strains budder, some don't (wax)... scrape when your done. You can also do this tek with a frying pan instead of boiling water double boil, BUT... be VERY careful with the temp... once your oil starts to vap, you can't stop it, you can just watch it burn away in front of your eyes. I prefer the double boil due to aforementioned concerns...

[youtube]aI9OtDYeW9Q[/youtube]

There is a tek to get your budder/ wax back into oil, but you will most likely lose all of your oil the first attempt at doing the tek. It takes practice.
 

ENDLSCYCLE

Well-Known Member
Awesome.....sounds good man.....will do this most likely tomorrow morning.....will let you know the outcome!!!!....thanks for everything so far!!!!
 

ENDLSCYCLE

Well-Known Member
Hah....trust me....it's veeeerrrryyyyy tempting......I still might have one more UA to take for the new job......and this one's gov. related so I'm willing to wait it out....did the background check,and fingerprints....just waiting for them to call and give me clearance....I've heard that a UA is involved but don't really want to say "Hey Co-Worker....they gonna make me piss once the call???" ........just been playing with all my new toys....globe set up....BHO tube....new jet torch.....got a new heady wand for the vaporizer.....and supposedly I have a heady inline being blown, but most glass blowers are lazy fkn pieces of shit.....ordered seeds.....harvested 6ozs off one plant.....been really busy really sober last couple of months....LOL



EDIT>>>>>>and mine did not bubble like that in the video....it was a real quick evap!!!! was it the outside temp maybe???
 

Benassi

Well-Known Member
Hah....trust me....it's veeeerrrryyyyy tempting......I still might have one more UA to take for the new job......and this one's gov. related so I'm willing to wait it out....did the background check,and fingerprints....just waiting for them to call and give me clearance....I've heard that a UA is involved but don't really want to say "Hey Co-Worker....they gonna make me piss once the call???" ........just been playing with all my new toys....globe set up....BHO tube....new jet torch.....got a new heady wand for the vaporizer.....and supposedly I have a heady inline being blown, but most glass blowers are lazy fkn pieces of shit.....ordered seeds.....harvested 6ozs off one plant.....been really busy really sober last couple of months....LOL



EDIT>>>>>>and mine did not bubble like that in the video....it was a real quick evap!!!! was it the outside temp maybe???
That's the most weed related sober months I have ever heard of

I just had some OG Budder out of the FDD oil spoon :D

faaaaaaaaaaaaaaaaded
 

Benassi

Well-Known Member
Oh hell no, because I love bongs and water pieces, domes and atom smashers ALL THE WAY. But since I just got it, I wanna break it in nicely with some good sized bowls. I like the fact I can get multiple hits because the oil isn't on a hot surface, I apply the heat. His spoon brings out my oils taste soooooo nice the OG budder was like a mouthfull of OG nugs dripping in flavor. Fuck I love BHO

Plus he slipped in a hot hit wand for me! Nice little surprise as the hot hit wand I picked up takes longer to heat up, so I'm stoked. Now I can spoon oil bowls while snowboarding.
 

ENDLSCYCLE

Well-Known Member
New to BHO....whats the atom smasher???....I feel like I'm a little kid again learning how to hold the carb...LOL....that was 14yrs ago...LOL
 

Benassi

Well-Known Member
Atom Smashers are my favey :D

Put oil in deep bowl, torch the hot hit that's attached and swing it down into the bowl

 

jimmy jones

Active Member
Very nice thread. Can't wait to try this. I have some left over silk screen from the tumbler I built. Can I use that instead of cheese cloth?
 

PussymOneyWeed

Well-Known Member
Awsome. I think its some 140 if I remember correctly. Time to hit up bb+b.
If you live an a extremely erll friendly zone and there soldout at at BBB(like here haha) you can hit up walmarts kitchen utensils sections. It's like 2 dollars more than BBB but its the same one =P
 
Top