HomeMade DIY show off your best idea!

Danielsgb said:
I found another use. i mounted a fan to move air out of my grow room, and it pushed the door open so I used one of these on the fan in front of it to move the door back where I want.

FullDuplex Quote:

ha ha got to love Pink Floyd

And here is the DIY i did on my grow room DIY cool tube and pretty much everything else.

Used ducting for dryer, cool tube is a glass sleeve from Old Time pottery. No need to cut the bottom off this one. Its a straight through glass tube and no swell in the middle like reg hurricanes i see people use.

That cool tube looks great. DIY projects are my physical therapy.8-)
Daniels
Click to expand...


Why thank you sir put it all together last night. took about 2 hours to mount everything and get it in there right
 
This is really a fantastic thread MV,
Growers have got to be among the most creative and innovative people around. Haven't read it all but what I have seen is amazing!
 
MatanuskaValley said:
Another upside to good weed, it breeds creativity!
Click to expand...

That it does.

I just logged on. 10min ago I was jammin' on the guitar and tweaked a little something something and came up with a cool sound I like. I've only been playing for a year so I'm pretty stoke.

Herb definately gets the creative juices flowing.
 
I DIY everything I can and I was having heat problems in my 2x4x56" cab with my 400hps so I put a peice of tempered glass in between the plants and the light and now right now my box has been light for 11 hours and the temp is 71.8. Check the pic.
 

Attachments

  • IMG_3862.JPG
    IMG_3862.JPG
    57.7 KB · Views: 37
Here's my DIY aero-cloner. Bubble wands and a heater w/ thermometer are hot glued in. It was made for 16 originally, but I converted it to 8 as that is enough (16 was too crowded). I put plain water with a little Super-thrive and change it every couple days. I've been running it at 15 min. on 30 min. off. The temp's been around 80. I have a dome on them and I've had a good success rate on the 3 times I've used it. Hopefully the 4th will be a 100% rate. How that sound for the 15/30 min timing?
Daniels:weed:
 

Attachments

  • Cloner 008.jpg
    Cloner 008.jpg
    71.2 KB · Views: 23
  • Cloner 001.jpg
    Cloner 001.jpg
    73.8 KB · Views: 17
  • Cloner 009.jpg
    Cloner 009.jpg
    67 KB · Views: 23
  • Cloner 002.jpg
    Cloner 002.jpg
    46.3 KB · Views: 17
  • Cloner 007.jpg
    Cloner 007.jpg
    75.3 KB · Views: 26
  • My rebuilt aero-cloner.jpg
    My rebuilt aero-cloner.jpg
    59.8 KB · Views: 26
Just my little DIY dry box with a couple sampel buds before harvest time. Simple, cheap and effective!

50 CFM bathroom fan, passive intake, negative pressure zone, does work... haha
 
Here's today's project. My old intake fan died. Walmart POS, and I replaced it with a new one. I got a $6 fan, but with metal blades, and more power. I zip-tied a piece of aluminum dryer duct work to it. I then used foil Duck Tape. I cut off the cord, ran it through the ducting then replaced a male end to it. I mounted it, then put the PVC back together. It is working well. I have to run a test to see how much better it is.
Danielsbongsmilie
 

Attachments

  • Foil Duck Tape.jpg
    Foil Duck Tape.jpg
    76.4 KB · Views: 22
  • Wide view.jpg
    Wide view.jpg
    40.1 KB · Views: 19
  • materials 2.jpg
    materials 2.jpg
    76.4 KB · Views: 20
  • Old one.jpg
    Old one.jpg
    137.7 KB · Views: 18
  • Loose zip-ties.jpg
    Loose zip-ties.jpg
    73 KB · Views: 19
  • Final pic.jpg
    Final pic.jpg
    45.3 KB · Views: 18
  • tight zip-ties.jpg
    tight zip-ties.jpg
    63.5 KB · Views: 17
  • Materials.jpg
    Materials.jpg
    72.5 KB · Views: 19
  • Prepped area.jpg
    Prepped area.jpg
    39.8 KB · Views: 19
  • 3-28 Intake old one.jpg
    3-28 Intake old one.jpg
    142.3 KB · Views: 20
Cheapo DIY carbon filter, box fan + carbon + duct tape + fabric

77682211.jpg
 
You must log in or register to reply here.
Back
Top