• Here is a link to the full explanation: https://rollitup.org/t/welcome-back-did-you-try-turning-it-off-and-on-again.1104810/

help please

C

Crystalized

Active Member
i bought stuff for a grow tent 3x3x7 i bought a 600 watt light, ballast , incline fan, ducting and yield master supreme reflector with glass. the incline fan is rated 160 cfm. I need to know if this is good enough and would like a photo possibly of what it looks like set up. I thought i could tackle this but want to make sure the tent is secret jardin
 
amrcngror

amrcngror

Active Member
you should be fine dude, i use a 165 cfm inline fan witha carbon filter....my grow box is 27 inches wide 3ft deep and 65 inches high, and that fan and all works great at keepin the temps right around 76 - 80 also a clip on fan too..but i only have a 250w hps.....
 
Phillip J Fry

Phillip J Fry

Active Member
I can say this I have a 1000w HPS cooled by one 8 inch, 500cfm, inline fan with insulated ducting and i can hold my hand on the glass everywhere except directly under the bulb.
Make sure you suck air through the light, not blow it.
 
ak.fortyseven

ak.fortyseven

Well-Known Member
I shop there. although i liked them better before all the retail store expansion, they have muffed my last 2 orders, shipping delayed and left shit out of the order
 
amrcngror

amrcngror

Active Member
Crystalized said:
i bought stuff for a grow tent 3x3x7 i bought a 600 watt light, ballast , incline fan, ducting and yield master supreme reflector with glass. the incline fan is rated 160 cfm. I need to know if this is good enough and would like a photo possibly of what it looks like set up. I thought i could tackle this but want to make sure the tent is secret jardin
Click to expand...
detroit hey? awesome!...need any help i can be there ina bout 3 hrs lol
 
ak.fortyseven

ak.fortyseven

Well-Known Member
that is just one example of how it can be mounted, adjust the rig to suit your needs, you can even have the fan on the outside of the tent, sucking out of the tent.
 
4tatude

4tatude

Well-Known Member
i recomend seting the fan on top of tent n hooking duct to it through the top vent. duel purpose, keeps heat outside tent n you wont ever have to worry about fan coming loose n crushing plants.. ask me how i know lol. filter-light-fan in that order, they are designed to suck not push.
 
ak.fortyseven

ak.fortyseven

Well-Known Member
in the photo, its removing air from the tent, but the fan ends up pushing because of where it is put, thoose fans work best is they suck the air, so optimally if you had it ontop of your tent pulling thru the light then lastly the filter.
 
You must log in or register to reply here.
Top