Hash and Oil Picture Thread

ok i said i was going to post pics of the bulk but never did so here is what is left of it.....

First up Critical Kush and Romulan mixed...
IMG_00000121.jpgIMG_00000122.jpg
Then the Headband...
IMG_00000124.jpg
The Headband is kinda orange gold, and the Critical Romulan wax is gold
IMG_00000125.jpgIMG_00000126.jpg
 
niceee shatter like comb :]
use pretty low temps? not full vac? howd you go abouts? i ve made a couple runs like this lately. not too much effort or time :]
2904141d1385192464-hash-oil-picture-thread-dab.jpg



what the fackk!! this bd is incredible
2906916d1385399378-hash-oil-picture-thread-img_3116.jpg

cute :p
2906919d1385399421-hash-oil-picture-thread-img_3150.jpg




ya yaaa, super consistent mang. it makes me wonder, do you only show pics of awesome oil? do you happen to have a bunch of rejects around? or naa? just straight fire, everywhere..

2906956d1385403637-hash-oil-picture-thread-img_00000126.jpg
 
Straight fire round here son!

Lol...what'd you use for the mold or whatever? I never thought about that..cool
 
lol thanks
no i haven't been blasting very much so the only stuff i have been blasting has been stuff from my crop so its always fire lol
 

  • niceee shatter like comb :]
    use pretty low temps? not full vac? howd you go abouts? i ve made a couple runs like this lately. not too much effort or time :]
    2904141d1385192464-hash-oil-picture-thread-dab.jpg




Here in CO at 7200ft. we can only pull -22hg on the vac. which when you do the math, yes it's a full vacuum but the efficiency is not as good as it is at sea level. This was at about 110 deg for quite awhile. My basement is 65 deg at 16% humidity, so these patties stay hard and transparent. Still experimenting, but seems to do the trick and tastes good. I also like to winterize everclear instead of vac purge sometimes.
 
blackforest said:

  • niceee​
Here in CO at 7200ft. we can only pull -22hg on the vac. which when you do the math, yes it's a full vacuum but the efficiency is not as good as it is at sea level. This was at about 110 deg for quite awhile. My basement is 65 deg at 16% humidity, so these patties stay hard and transparent. Still experimenting, but seems to do the trick and tastes good. I also like to winterize everclear instead of vac purge sometimes.
Click to expand...


hmm, interesting mang. seems like at 7200 ft. you must get instant muffins.. do you spray in an enclosed system, or open tube?

i ask because ive noticed enclosed systems have an excellent way of keeping outside moisture from getting into oil.

while open tubes require a good spray and boil off to ensure least amount of moisture collected..

thuss brings me to my insta muffin quesiton :]

seems like if you are working with good material, and little moisture, then bam! insta muffin :p

i dunno though. please chime in on waxology up in high CO. gots a ton of hype in the MMJ world

good job, p.s. :]
 
qwizoking said:
Lol...what'd you use for the mold or whatever? I never thought about that..cool
Click to expand...

who what? went back multiple pages, could not find a mold topic on this thread.. grrr. i looked too hard :[

only blast good shit twitch! dont waste time, you got pretty buds to be growing :]

im a scavenger though. its hard to say nooooooooooooooooo.
 
ohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh. molding, i seeee

not nasty mold, kkkkk. got to be specific with those terms in our community :]

dude, molds are fun. always been an idea to brand/mold the chunks :]
 
Guzias1 said:
hmm, interesting mang. seems like at 7200 ft. you must get instant muffins.. do you spray in an enclosed system, or open tube?

i ask because ive noticed enclosed systems have an excellent way of keeping outside moisture from getting into oil.

while open tubes require a good spray and boil off to ensure least amount of moisture collected..

thuss brings me to my insta muffin quesiton :]

seems like if you are working with good material, and little moisture, then bam! insta muffin :p

i dunno though. please chime in on waxology up in high CO. gots a ton of hype in the MMJ world

good job, p.s. :]
Click to expand...

They do muffin up within the first few seconds of initiating the vac, but I'm not sure if current altitude plays a roll because vac chambers at sea level are more efficient. There is not much moisture here, humidity is around 20% so, I have never had a moisture issue. this never sizzles (indicator of moisture). I just blast into pyrex w/ glass tubes and mainly use trim because I pretty much have an unlimited supply thanks to a few friends. After blasting into a round pyrex dish (scrape from middle towards you, gets every last bit), I'll scrape to some martha wrap and put in vac chamber at 110 deg(ish) for quite some time....a couple of hours I guess. It changes from the muffin state and as it warms, it will flatten out and I can get it to 'boil' for awhile until I feel like it's done. I understand you can continue to vac past the shatter stage, and get it all waxy and honeycomb like, and that's something I'll do on my next run. Right now, everyone loves the shatter, tastes great and looks....well awesome. LOL, I'm not a huge fan of wax/bho anymore as it gets me too ripped! But I love to make it.

Muffin Stage:
muffin.jpg
 
I'm really startin' to likes me some Quick Wash.....EYE-soooooo!!!

She is so dang amber-eeee and glassy...

Best o' all..... Only requires some high quality scraps.... Some shake, a lil bud and trikes stuck to the inside of a Ziplock got me this....

IMAG1799_zps1c738e9a.jpg


Yeeeee!

Gotta little herb in there, but that's okay ....Damn Iso?...

Where have you been all my life?...under my nose the entire time...

She makes good extracts ladies and gentlemen...

IMAG1797_zps60245ae8.jpg


...from a few grams of....uh hhhh, ............scraps...
:)
 
You must log in or register to reply here.
Back
Top