Hash and Oil Picture Thread

Guzias1

Well-Known Member
i cant get an exact weight, because i let it drip dry onto some carboard. the waxes and what not really seep out at room temp . tis why its vital to keep it all cold while filtering.. ( you knew that)

but i did snap a pic, this is the 2nd filtration, ya. fucking narlyyyyyyy. the first one was hugeee

 

BluJayz

Well-Known Member
Our first ever attempt at ISO with trimmings. Also decided to not filter more than 110micron so its a little foggy but still full melt.

3oz of dried trim/tiny buds; The Strain was Chem Dawg.

First wash: 3.5g
1.jpg


Second wash 3.0g
2.jpg

Third wash: unknown
(Photo pending)

There is little reminiscence of the chem dawg taste but the high's are what was expected. Batch one delivers the "blinds check" needed in the morning and the second puts your shoulders back ready for nighttime. There are plans to polish them further.
 

vacpurge

New Member
I bunched my filter up and put it in the extractor to prevent weed blowback, and the filter came out clean. the butane washes it perfectly... take those plant waxes out though. I didnt use a plant wax filter. that shit looks weird as fuck... what happened haha? shitty start material?
 

WarMachine

Well-Known Member
So I ordered 6 cans of Colibri Premium butane in preparation of doing a BHO run. I think I'll end up using 10g of bud and probably a can/can and a half of butane. I plan on doing it the long soak method for a nice hour and forty five minutes. My question is about winterizing it though. Should I do that directly after the spray and filter? Or do I do it after the purge? Also how much everclear/99% ISO do I add? And correct me if I am wrong but the process is, add the EC/99% and then place it in the freezer for 24/48 hours, pour threw a coffee filter then purge again?
 

Fadedawg

Well-Known Member
So I ordered 6 cans of Colibri Premium butane in preparation of doing a BHO run. I think I'll end up using 10g of bud and probably a can/can and a half of butane. I plan on doing it the long soak method for a nice hour and forty five minutes. My question is about winterizing it though. Should I do that directly after the spray and filter? Or do I do it after the purge? Also how much everclear/99% ISO do I add? And correct me if I am wrong but the process is, add the EC/99% and then place it in the freezer for 24/48 hours, pour threw a coffee filter then purge again?
I add the ethanol after the butane is visably gone, but you don't have to wait. The residual butane will leave with the alcohol purge. We use 48 hours for a winterizing soak.
 

vacpurge

New Member
So I ordered 6 cans of Colibri Premium butane in preparation of doing a BHO run. I think I'll end up using 10g of bud and probably a can/can and a half of butane. I plan on doing it the long soak method for a nice hour and forty five minutes. My question is about winterizing it though. Should I do that directly after the spray and filter? Or do I do it after the purge? Also how much everclear/99% ISO do I add? And correct me if I am wrong but the process is, add the EC/99% and then place it in the freezer for 24/48 hours, pour threw a coffee filter then purge again?
first of all, I would buy 2 brand new, clean, same size pyrex dishes from wal mart for like 15$. and clean a nice spot in your freezer or maybe set up a dripping device if youre running larger amounts.

as seen in the dish above, I evap all the butane off, outdoors, then scrape it up, weigh it, and drip it into my small pyrex cup.. I also get the dish warm with a quick blast of my torch, then pour everclear (careful as this shits flammable) into the warm dish, and it helps dissolve the oil into the everclear a bit faster, you can stir it too to help. takes about 5 minutes.

or like fadedawg said, you can mix the everclear while there is still liquid butane remaining, but ive never done that so dont know the proper technique so wont comment.

either way works though and your winterized stuff will be awesome.

as far as the amount, I usually do 10x the size of your oil glob... start small and add more if needed. I poured too much in my dish the other day and figured it was too much... really should have poured some back but got excited and threw the oil in right away so it was too late :( not sure what the negatives to this would be though. you want it to be the consistency of alcohol still... if your oil is making it thicken in the pyrex, add another liquid ounce of everclear.

let it freeze for 48 hours. im not sure if 24 is any different than 48.

clear a nice spot in your freezer. set your second pyrex dish up in the freezer, and either set a filter into it, OR hang a filter off the freezer rack with some tie wire, or build something fancy if you want. you want to try to keep the mix COLD while dripping, so try to do it IN the freezer. pour it, and forget it. try not to go over the half way mark in the filter, and do not shake it or agitate it to get more juice through. do not squeeze it when youre done. when the filter is dry, stuff it into your butane extraction tube to prevent weed crumb blow back, and the butane also rinses that everclear oil that stays in it.

to evap it, however you normally do, either in a pyrex dish or a stainless steel bowl, set it on a griddle OUTSIDE on very low heat, and place a fan on it for a few hours.

scrape it up, drip it onto parchment paper, throw it in the vac chamber for 12 hours, and youve got yourself the nicest, smoothest chunk of amber glass ever. youll love it and be addicted, I cant even smoke non winterized oil anymore, its so fuckin harsh!!!! ive spoiled myself with this winterizing stuff. only problem is a half oz gave me 2.5g of butane oil... and like 2.2 or 2g of winterized oil... ouch!!! worth it though, you only got 1 set of lungs and those plant waxes DAMAGE the lungs. youll understand after you winterize.
 

vacpurge

New Member
hmm. so thats roughly a 3:1 ratio or so? seems a little low. I think 10:1 might be too high though... tough to say for sure.

what does using too much alcohol really do though, since were evapping 99.9% of it anyways??
 

Twitch

Well-Known Member
that is what i have read and i have done it with no problems with it dissolving completely

not trying to argue just stating my experiences
 

vacpurge

New Member
hmm. interesting. I will try that much next time. ive noticed my bottles of everclear dont last long, maybe thats why. I know it would dissolve completely at 3:1... but would it still be thin at 3:1? ive read you want it to be alcohol consistency after the oil is dissolved... and from personal experience. pouring a thick sludge into the filter doesnt work very well haha.
 

650baquet

Active Member
Been smokin bud for a while now....must...make...more...oil....cough cough hack hack
Prolly tomorrow make some tasty Trainwreck oil. I have over an oz of dime size nugs that will be used :)
 

Someacdude

Active Member
jsut like everyone else doing dabs online, this guy smokes wayyy too much

bubt this is a pretty good idea of how great these things work

[video=youtube;2W0hwHg07bY]http://www.youtube.com/watch?v=2W0hwHg07bY[/video]
Does anyone know what hes smoking out of?
 

vacpurge

New Member
yeahh 3:1 dont work to dissolve my oil haha. even after a few hours it didnt dissolve it. I think I ended up closer to a 5:1 ratio. I got pics, but too lazy to post.
 

vacpurge

New Member
it still boggles my mind how the oil grows back out and he gets a second hit... I gotta get me one of those things. smoking oil is getting expensive!!!

(I am kidding ya fuckin idiot!!!!)
 
Top