Has used the inventronics - esd-320s310dt - Help

R

rageous

Member
I recently bought this inventronics - esd-320s310dt - 320 watt driver and I was going to use it to power Vero 29 gen 7s. I have 2 of them sitting around one at 5k the other is 3500 I think. Anyways, have you guys ran any other lights with this driver? Not sure what there is to offer that runs high ma like veros. I know my cxb3590s would run too hot. Any advice
 
J2M3S

J2M3S

Well-Known Member
rageous said:
I recently bought this inventronics - esd-320s310dt - 320 watt driver and I was going to use it to power Vero 29 gen 7s. I have 2 of them sitting around one at 5k the other is 3500 I think. Anyways, have you guys ran any other lights with this driver? Not sure what there is to offer that runs high ma like veros. I know my cxb3590s would run too hot. Any advice
Click to expand...
You might want to check out this section for better results.

LED and other Lighting

Growing with LEDs / Inductive / Plasma etc.
www.rollitup.org
 
7CardBud

7CardBud

Well-Known Member
You can run many different light setups on a certain driver. A driver's specs will tell you what type of parallel/series circuit you will need to build to use the driver optimally.
 
R

rageous

Member
Yeah I've made a few lights but they were ran with individual drivers. Never something at 320 watts. Has an output of 64-183v.@2100 ma.I was seeing what others might have run.
 
You must log in or register to reply here.
Top