Harvest a Pound Every Three Weeks!

whulkamania said:
Oh sorry to hear but even if you do have a Medical Marijuana card that is under state not FEDERAL so the feds can break down the door easy.
Click to expand...

you should stop everything then dude. we are trying to help. not make a billion bucks. your trying to hate, and yes hating it is. and by the way no fed will ever raid a grow op within legal medical limits. legal limit in most places is 6 mature dump ass.
 
If I were to essentially cut Stinkbuds flowering room design in half meaning 3 aero/nft fence posts only having 7 plant sites could i fit it into a 4x4 grow tent or not a chance? also would 2x600w hps be good for the halved design?
 
Not a chance. In a 4x4 your best bet is to either run two small systems with the reservoirs under the rails or, the better option IMO is four 4' rails with one res under the rails and a 1k hps over the top. Should pull 1 to 1.5 easy, but you wouldn't be perpetual. The problem with the 4x4 and trying to be perpetual with the stink system is the need for different reservoirs and flushing. You could however just run one res, still have your rails on different cycles, and skip the flush. It's been my experience with the botanicare line that the flush is not necessary, it'll taste amazing either way with the right genetics. Good luck.
 
Have foud there's an easier way to get better results in an aerocloner, than building that PVC frame thing and having misters that constantly keep blocking....

Don't worry about building that PVC thing save your money, you don't even need a water pump, but you do need the leak proof rubbermaid roughneck... Its not light tight, I had to cover mine in aluminium tape to make it light tight... I am using a 110watt day propagator flouro though..

Buy yourself the really long airstones, about 30cm ones, two of them, and an air pump with two outlets... Fill your aerocloner with water and whatever propagation solution you choose and turn the air pump on high... Heaps of bubbles will be created, when they break the surface of the water, they pop and create the finest mist, that no commercially made misters can match... I've got a water heater in the water set to 24 degrees celcius and i've just walked away...
 
Once again my aero cloner has roots in 5 days, man it's like shooting fish in a barrel. It's just so easy, set it and forget it.







attachment.php



attachment.php
 

Attachments

  • DSC00990.jpg
    DSC00990.jpg
    39.8 KB · Views: 396
  • DSC00991.jpg
    DSC00991.jpg
    61.4 KB · Views: 396
tuffy99 said:
Hi Northeastern Lights,
So im a noob and people seem to say lots of conflicting things. can you verify the following for an aerocloner.

3'' to 5'' cuttings from the lower 50% of the plant. No spraying/dipping or anything.
Cut them 3 nodes long and scrape the first centimeter.
Use a neoprene sleve and a netpot and have the stem about an inch out of the bottom of the pot.
Use a dome?
Water temp 72 F. Air 78F Humidity. 60% - 70%
No dark period. Straight to 24hr lights.
No mist.
water cycle 5 min off, 1 min on.

This is what i have picked up so far. What have you done to get roots in 5 days. So impressed dude!!!
Click to expand...

My cuttings are about 3-5"

As for nodes I don't think it matters, I just slice at a 45, no scraping.


My stems hang out the net pots a bit, as long as they make it to the bottom your good.

No dome, no misting, no dipping. Just cut it and thats it.


My water temps, I have no idea, Humidity is about 40%


I leave them on 24/7


This run I didn't use the timer, but the last 2 I did. Both work just fine



I didn't ph the water and this time I did, might have gained a day but I don't really know.



Check out my first aero grow


https://www.rollitup.org/hydroponics-aeroponics/317368-nels-first-go-round-aero.html
 
northeastern lights said:
Once again my aero cloner has roots in 5 days, man it's like shooting fish in a barrel. It's just so easy, set it and forget it.











attachment.php



attachment.php
Click to expand...






Here's a pic from tonight, so this is less than 48 hours of growth. This is the reason I'm done with soil/soiless. I'll do another pic in 2 days, you watch.





attachment.php
 

Attachments

  • DSC01014.jpg
    DSC01014.jpg
    45.8 KB · Views: 346
Wow North, you've so got soiless growing dialled in... I can only hope I get close to what you're achieving over there.... Good on you mate :-)
 
So have read about the first 20 pages. i love the system, and would love to try it out. although i am already a little bigger than Stink's room. I have a 9 by 9 room, with three lights in it. I notice that Stink's flower room has three of the flower systems under two lights. is there any design he has in the forum that would be a bit bigger and go under one 1000W light. I guess im asking if their are plans for a system that is a little bit bigger that will work the same way?

Thanks

this thread is sooooooo awesome. nice work Stink, and nice work everyone for keeping up with it.
 
Ok pics as promised.


This is from 2.5 days ago


attachment.php




This is from this morning, 2.5 days growth from the upper picture. The plants also have quite a bit of green growth.



attachment.php
 

Attachments

  • DSC01016.jpg
    DSC01016.jpg
    50.3 KB · Views: 394
  • DSC01014.jpg
    DSC01014.jpg
    45.8 KB · Views: 395
??? say if i had 6 600 watt lights what do you think id be pulling i def have enough room to fit them perfectly, just curious as to what this system is capable of pulling with co2 and 3600 watts
 
eyes ableed said:
??? say if i had 6 600 watt lights what do you think id be pulling i def have enough room to fit them perfectly, just curious as to what this system is capable of pulling with co2 and 3600 watts
Click to expand...

At 0.5 grams per watt you would harvest around 62 ounces. If you can hit a gram a watt then you are looking at closer to 120 oz.

Quantity is a factor of the strain of meds and how long you let them veg. Bigger plants produce more buds.

You you can run a whole bunch of plants and harvest less per plant. Like the StinkBud Sr. system
Or you can run less plants and grow them bigger like the StinkBud Jr. and StinkBud Single.
 
StinkBud said:
At 0.5 grams per watt you would harvest around 62 ounces. If you can hit a gram a watt then you are looking at closer to 120 oz.

Quantity is a factor of the strain of meds and how long you let them veg. Bigger plants produce more buds.

You you can run a whole bunch of plants and harvest less per plant. Like the StinkBud Sr. system
Or you can run less plants and grow them bigger like the StinkBud Jr. and StinkBud Single.
Click to expand...

Stink,

Do you have a place where i can see all your great inventions? im just trying to see which will work best in my room. Love the thread.

Thanks.
 
You must log in or register to reply here.

Similar threads

bluejunta
Thoughts on my 3rd grow/harvest ?
Replies
3
Views
307
bluejunta
bluejunta
D
Need some help
Replies
5
Views
277
Dean6969$
D
Woedae
Cloning a flowering plant
Replies
12
Views
553
conor c
conor c
Psyclops
Psyclops Flood and Drain
Replies
9
Views
278
Psyclops
Psyclops
J
Caterpillar problem suddenly two weeks before harvest please!
Replies
17
Views
769
Dboybudz
Dboybudz
Back
Top