Growing Tips for indoor plants with Mars Hydro LED Grow Light

MarsHydrofactory

MarsHydrofactory

Well-Known Member
Below are some growing tips for the the growers to use the Mars Hydro TS 600 1000 2000 3000 :leaf: :bigjoint: :hug: :hug: :leaf:

In the seedling stage, plants are too vulnerable they need the least intensity and most distance, high-intensity light may burn the leaves. In the vegetative stage, plants respond well to intensity light, they are maturing and using photosynthesis to grow quickly. Flowering is the final stage of a plant’s growth cycle — during this time fruit production and stem growth accelerate, plants need the highest intensity

Recommend hanging distance above plants:
Germination: 50~70cm
Seedling: 45~60cm
Vegetative: 40~50cm
Flower: 20~40cm

Recommend lighting time:
Seedling: 18/6 (on/off)
Vegetative: 18/6 or 20/4(on/off)
Flower: 12/12 (on/off)

Recommend Dimming level:
Germination: 30%
Seedling: 50%~60%
Vegetative: 60%~100%
Flower: 100%

Grow on Earth, Grow with Mars
Happy growing!
CM-TS600--different-hanging-ways.jpg
 
Watzup

Watzup

Member
Hi MarsHydrofactory,
At present I am using the Mars FC-E 3000 and have adopted the heights recommended for germination,Unfortunately this produced leggy seedlings which I had to repair so I then lowered the light to 400mm at 50% this has now burnt them, so I have reduced power to 20% and see what happens. I I I am really having some issues.Any Tips!
 
LaBoySM

LaBoySM

Active Member
Watzup said:
Hi MarsHydrofactory,
At present I am using the Mars FC-E 3000 and have adopted the heights recommended for germination,Unfortunately this produced leggy seedlings which I had to repair so I then lowered the light to 400mm at 50% this has now burnt them, so I have reduced power to 20% and see what happens. I I I am really having some issues.Any Tips!
Click to expand...
Hey man. Try those specs out. I have the ts1000. Try getting ur heights right first on a low dim setting and see what the plants do and adjust brightness from there. All the best
 
LaBoySM

LaBoySM

Active Member
Try not to drop the light and increase light intensity at the same time. It's either or at first. If plants stretch then drop light and dim low again until u start to like what u see
 
MarsHydrofactory

MarsHydrofactory

Well-Known Member
Watzup said:
Hi MarsHydrofactory,
At present I am using the Mars FC-E 3000 and have adopted the heights recommended for germination,Unfortunately this produced leggy seedlings which I had to repair so I then lowered the light to 400mm at 50% this has now burnt them, so I have reduced power to 20% and see what happens. I I I am really having some issues.Any Tips!
Click to expand...
fc-e fc-e grow tips.png
 
MarsHydrofactory

MarsHydrofactory

Well-Known Member
Watzup said:
Hi MarsHydrofactory,
At present I am using the Mars FC-E 3000 and have adopted the heights recommended for germination,Unfortunately this produced leggy seedlings which I had to repair so I then lowered the light to 400mm at 50% this has now burnt them, so I have reduced power to 20% and see what happens. I I I am really having some issues.Any Tips!
Click to expand...
by the way, below is the recommend growing data for the FC/FC-E, hope it is good for you to use the light. any questions, please PM or email [email protected]. thanks.
recommended growing data.jpg
 
You must log in or register to reply here.
Top