growing one plant

student

Well-Known Member
then you need to get an moist paper towel and wrap seeds in it its ok if it drips just put in cup then put it in daark place WAIT 3 ! DAYS

get back to me after 3 days till then read every thing in the GrowFAQ at the to of the page {HAVE FUN}

:D :D :D
 

igstid420

Well-Known Member
then you need to get an moist paper towel and wrap seeds in it its ok if it drips just put in cup then put it in daark place WAIT 3 ! DAYS

get back to me after 3 days till then read every thing in the GrowFAQ at the to of the page {HAVE FUN}

:D :D :D
if you only want 1 plant, 5 seeds may be a waiste. But also, u deffinetly want more than 1 plant to grow. There will be no quarentee that your 1 plant is female. Would be a huge waiste to dedicate time in effort to bloom out a male. You should grow no less than 3 plants. That 'should" produce atleast 1 female, goodluck
 

Happy Stranger

Active Member
buy five feminized seeds, try to sprout them one at a time, and plant the first to sprout. use the left overs for subsequent one-plant grows (?)
 

SeniorRaincloud

Active Member
yeah start of with a couple seeds and then plant all the ones that look the best=)!!! from there use sum cfls there really cheap and they do the job=)!!!
 

Gritter

Member
can i keep the plant growing using a flshlight
You can, but your fleshlight usage really has nothing to do with the welfare of your plants.

Someone mentioned "feminized seeds" earlier, but I wanted to add:

If you only want ONE plant, the only way to guarantee it'll be a female, is to start with a clone. In my Medical Marijuana state, clones are available at most dispensaries from $6.00 to $14.00 per plant.

The cheapest lighting would be flourescents, but you really need something more powerful after the seedling stage.

If you're set on only growing one plant, a 400 watt HID light would treat you well. You could get one that does Metal Halide for vegetative, and High Pressure Sodium for the flowing stages. Good luck. :leaf:
 

quik410

Member
I heard that if you grow 1 plant, under a 1000 Watt light, vegetate it for 1 month, start topping right after the third inter node, continue topping throughout the vegetation, flower it using a trellis so light penetrates the canopy, you can get a pretty big plant that could weigh around 1 pound if not more. Also grow it in a 30 gallon pot, or a 15 gallon pot, but the 30 gallon pot would be better...
 

supchaka

Well-Known Member
I heard that if you grow 1 plant, under a 1000 Watt light, vegetate it for 1 month, start topping right after the third inter node, continue topping throughout the vegetation, flower it using a trellis so light penetrates the canopy, you can get a pretty big plant that could weigh around 1 pound if not more. Also grow it in a 30 gallon pot, or a 15 gallon pot, but the 30 gallon pot would be better...
30 gallons is way overkill for an indoor plant with 1 month veg. 5-10 would be fine.
 

Elder1

Active Member
Having a few single plant grows in tiny spaces under my belt, I can tell you now that you really want to get everything right from the start such as good genetics, ventilation, medium etc because you are putting all your eggs in one basket. (and if you get a really shitty pheno your stuck with it)

I always buy feminized seeds for single grows, use approx 120w or over of the correct spectrum cfls, LST from very early on and use a tried and true nutrient regime.

Even using LST to maximize your yields (my little single grows would usually end up at 16" high and 22" wide!) I grew tired of putting in all the work and waiting time just to pull a couple of ounces...now I use 700w of HID lighting and its just beginning to feel worth the time. Everyone has different needs though, you might not burn through an ounce a week like I do!
 

imchucky666

Well-Known Member
You can, but your fleshlight usage really has nothing to do with the welfare of your plants.

Someone mentioned "feminized seeds" earlier, but I wanted to add:

If you only want ONE plant, the only way to guarantee it'll be a female, is to start with a clone. In my Medical Marijuana state, clones are available at most dispensaries from $6.00 to $14.00 per plant.

The cheapest lighting would be flourescents, but you really need something more powerful after the seedling stage.

If you're set on only growing one plant, a 400 watt HID light would treat you well. You could get one that does Metal Halide for vegetative, and High Pressure Sodium for the flowing stages. Good luck. :leaf:
Dam guys, are we talking 'flashlight' or 'fleshlight' here???? LOL
 

redriver

Member
In lieu of the HID's you can get red and blue LED's that put off the correct light waves for both vege and flowering stages. This is since you are growing only one plant. Keeps the heat down, less ele used, less chance of a fire (since you sound as if you are new to this).
 

Villa

Active Member
I heard that if you grow 1 plant, under a 1000 Watt light, vegetate it for 1 month, start topping right after the third inter node, continue topping throughout the vegetation, flower it using a trellis so light penetrates the canopy, you can get a pretty big plant that could weigh around 1 pound if not more. Also grow it in a 30 gallon pot, or a 15 gallon pot, but the 30 gallon pot would be better...
Another person who's going to give you advice he "heard".Don't listen to this dude as he knows nothing about growing.

OP.. What do you have to work with? A couple cfl bulbs will work nicely for 1 plant. A 400 watt for 1 plant IMO is way overkill.There's so many questions you haven't answered. Do you have access to clones, femmed seeds, or will you be using bagseed? Do you have a place for your grow all picked out?We need more info.
 
Top