pitbull420
Well-Known Member
First off let me think everybody in advance for any advice you can give me. So I have recently build a 3 x5 grow tent for flowering and a 3x3 veg tent. In my 3x5 I will be running a thousand watt lamp with a lumatek digital dimmable ballast I'm XXL Raptor reflector. I'm running two 6in inline fans one to draw out the Heat connected directly to the light and the second to bring fresh air into the tent. Now I have decided to go hydroponic for the first time with this one so I built a 3'x3'x8" flood table with a removable srcog net. Because I wanted to get my table as low as possible and have easier access to my Reservoir . I will be using a condensat pump to recirculate the runoff water back to my reservoir. That way I can keep my reservoir outside of the tent and my table will sit only 8 inches off the ground just enough room for the pump to fit. I have a portable air conditioner and small space heater along with the inkbird temperature controller. Now that is my basic setup so I guess my question would be as far as wiring goes what is the best surge protectors to use should I have a battery backup surge protector And I've been noticing both the pH and PPM of the runoff water or my seedlings in the rockwool has been rising. Is this normal if not how do you fix it. I soaked the cubes 4 24-hours in 5.5 pH solution drain them out and let them sit for about another five hours in a 5.5 nutrient-rich solution. also if I could get any ideas on how to run more efficiently and keep my Reservoir water a little warmer I would really appreciate it.