They don’t burn the oil. It’s an electric element that heats the oil in the heat exchanger. It like a radiator in a vehicle.How long does the oil last?
They don’t burn the oil. It’s an electric element that heats the oil in the heat exchanger. It like a radiator in a vehicle.How long does the oil last?
Source? I use both led's and hid and no difference. Light is light.Didn't mention the type of lighting being used, but I would suspect it's leds.
HID works in the 70's, led needs to be in the 80's for best transpiration.
I've used hid ..now led. Yes temps are relative.. going back to hid lightsSource? I use both led's and hid and no difference. Light is light.
It related to the leaf surface temps.Source? I use both led's and hid and no difference. Light is light.
May just be anecdotal but my plants under cob led's do in fact seem to do better at about 82. But I wouldn't be adding a heater to my tent to increase temps if it was only 70Source? I use both led's and hid and no difference. Light is light.
Watch those click and twist together style fans lol. They tend to come loose after a while and twist apart. If you're lucky, not much happens.I removed it and hung it outside the tent.
I do have black tape over my dehumidifier's power light, as well as the fan controller for the small fans inside.
I just recently won an inkbird controller for the temp. Waiting on it's arrival.
View attachment 4769190
I know. That’s why I keep it outside the tent. I actually replaced it tho, with an AC infinity T4.Watch those click and twist together style fans lol. They tend to come loose after a while and twist apart. If you're lucky, not much happens.
Mine came apart and the one half must have fell back into the spinning blade. There was a loud bang and ting-a-ling-a-ling coming from my tent at 4 am or so lol! Bits of fan and housing all over.
Mine twisted off because the ducting had a slight torque on it, combined with the vibrations, it finally gave way and hell broke loose
If you run a bead of packing tape around the seam I imagine it would stop that, or maybe some other way you find better. But just a heads up.
Another safe alternative is to run HID through a cool tube/ducting and let that heat your tent(s). I heat a 2x2 and 2x4 with a single 250w hps ballast & cool tube that pulls in ambient air from the house.Personally I'd avoid portable oil heaters. Just look on Amazon and see how many people say they are fire hazards. I had one and it eventually started melting at the plug/socket.
Ceramic heating element heaters are much safer IMO. I've had a simple milkhouse style heater that never overheats the plug/coord everything remain cool to the touch. Plus by law they all have the emergency shut off feature if they tip over or overrheat.
I suggest whatever heater you purchase for your tent that you let it run for as long as possible in a supervised setting to make sure it's not faulty. Usually if devices are faulty, they will fault very early on.
Always test your gear first!!!