Grow Chamber's, HATCH Style

Plumbing Part's For Bubbler's & Aeroponic Pod's:

1/2" PVC 4)- 8'

15)- 1/2" 90* Slip Glue Both End's

3) 1/2" 90* Slip Glue- Male Tread's

15) 1/2" 90* Slip Glue- 1/2" Female Thread's

4) 1/2" T's Slip Glue- Slip Glue- 1/2" Female Thread's Center

4) 1/2" 4-Way's Slip Glue All Around

2) Adapter's 3/4" Hose Swivel Connect Female Thread's- 1/2" Male Thread'

3) 1/2" Slip Glue Cap's

14) 1/2" Thread Cap's

32) 180* Mister's

12) 360* Mister's

1) 3/4" Hose Swivel Connect Female Thread's- 3/4" Male Thread's Inline Filter

1) 3/4" Hose Swivel connect Female Thread's- 3/4" Male Thread's Y

3) 2' 1/2" Water Hose Male- Female opposite



Pictured:
1);
2" Hole Saw-, 8/32 SAE Thread Chase-, 1/8" Drill Bit-, 1/4" Screw Tap-, Shown Are The Thread's That Are On All The Mister's & Connector's

2).
Assemble Of In-line-Filter

3).
The Filter Asembled

4).
The Assemble Of The Neck Of The Mister Bar

5).
The Neck Assembled

6).
Over-Head Look At The Mister Bar

7).
Show's 1/2" 90* Slip Glue One End & 1/2" Female Thread's On The Other

, 9).
1/2" 4-Way Slip Glue All Around, & 1/2" T Slip Glue- 1/2" Female Thread's Center

10).
Show's A 1/2" T Slip Glue Both Side's- 1/2" Female Center, The 1/2" 90* On The Bottom Of The Neck Slip Glue Both End's, The One On Top 1/2 90* Slip Glue- 1/2" Female Thread's

11).
Show's The Neck Assembled To The Mister Bar
Note: On Mine There Are Adapter's & Reducer's, Your Is Going To Be Simpler

12). Example Of The Mister Bar, With Two Riser's, & Mister's Assembled

13).
Show's You Every Cut You Need To Make
Note: The Only Measurement's Not On That Picture Are The 1"x4" 's For The Door's, & They Are For The Bottom Door 2)-11 1/2" -1)- 26 1/2"
The Top Door 2) 26 1/2" - 2)- 45"

Everything Else Is Illustrated On That Picture

When You Start Cutting The 1/2" PVC For The Bubbler's:
This Is For All Three- 9) At 18", 3) At 5", 3) At 12"

The Pieces For The Aeroponic Pod's Mister Bar:
This Is For Both-) At 4 1/2", 4) At 1", 4) At 1 1/2"

Well I Think That Sould Get It Running????,,,,,,,Any Question's????????

Good Then Get To Work!!!!!!!!!

assrabbi said:

you grind up your weed as fine as you can and theres this little bowl with a screen on the bottom and a nozzle on top. The weed is heated very slowly underneat the screen until the vapor is pouring off it, you know the bud is done when it starts smellin like burnt popcorn. NO NO RESIN none of that nasty shit gets burnt man, it just gets to the perfect temperature to burn the oils that contain all those yummy cannibanois and THC. the bag has a mouth peice on it so when you go for a hit your lips press the top of the mouth peice down and the little plastic nozzle opens up to the bag so you can hit the vapor, once you stop hitting it the nozzle closes. bags are (the ones I get) 10 for 20 bucks the cheaper the more you buy. But ten would last awhile considering you can use the same one for 4 months until it starts to wear then you can still use it for awhile after that, id say 3 months of HEAVY smoking per bag. but you never get too heavy on the vape, its always nice to switch it up...hit the bong and de blunt mon.

Click to expand...

Thank I Will Stick To My Home-Made Old Faithful!!!!,,,,,,,,,,,One Hitter Bong!!Can't Bet It EH!!!!!

i've got a quick question what the differience in the net cup sizes. is it smaller size more plants=more bud or bigger plant=more bud. what is better more 2'' cups or less 4'' cups

obie83 said:

i've got a quick question what the differience in the net cup sizes. is it smaller size more plants=more bud or bigger plant=more bud. what is better more 2'' cups or less 4'' cups

Click to expand...

Hey What's Up???,,,,,,,,,,I Guess I Would Have To Say, Different Stoke's For Different Foke's!!!!!!!!,,,,,,,,,When I Started A Long Time Ago, I Wanted To Design Something That I Could Get Harvest Year Around. & In The Design Stage, I would Crunch Number's, & Thing's Just Started Adding Up, & In UP, & So Finally Came To The Conclusion, If I'm Going To Do Something A Few Is Just As Bad As A Bunch, So I Went Big!!!

So I Like The Clone's, & Don't Veg Them, Just Flip Them As Soon as I Can, & Don't Have To Make Much A Plant, Because I Have So Many Of Them. I Like Them To Yield 14g. To 28g., Some Time's They Yield Alittle Over, & Some Time's They Don't, But Quanity Alway's Wiegh's Out. In My Clone Bubbler Top's I Can Get 40 Site's, & In The Flower Chamber's I Put 15 Sites Per Aeroponic Pod.


But To Answer Your Question, I Like The 2", Because The Cloning Rapid Starter Plug's Are 2", You Don't Have To Have Any Other Media, You Don't Have To Transplant, It Live's It Whole Cycle In The 2", & When Your Finished, You Just Clean The Basket & Neopren, & They Are Good To Go Again. & I Have About 600 Of The 2" Basket's. That Is Just My 2cent's On The Matter.

Hope This Might Help You Out, & Thank's For ComingbThrough HATCH Land, & Leaving A Post!!!!

thanks for the answer another thing my grow area is 4x4 or 16 sq ft is a 1000 watt hps good enough for this area or should i go with 2 600's

obie83 said:

thanks for the answer another thing my grow area is 4x4 or 16 sq ft is a 1000 watt hps good enough for this area or should i go with 2 600's

Click to expand...

If You Don't Have A Light Mover, Your Light Will Have To Be In The Center.
So I Would Go With The Two 600hps, So You Can Get The Center Of The Light Over More Plant's. Going To Have To Move Alot Of Air, Either Way, Vented Hood's Would Be The Best Route On That Deal,. & Move Alot Of Air Through Them & You can Get Them About 12" Or So From The Top Of The Canopy, & Flood Them With Lum's, They Will Freaking Love It!!!!......Best Of Luck!!!!

Good afternoon Hatch.

I was still going to try something new. And with your great advice and most excellent HOW TO. Lets see If we can't figure a system for me. I have been learning about work flow and efficiency. So as I get older I have figured this is the way to go.

The items that I have:
1)light mover
1)600w dig hps
1)465 dayton exhaust fan
4)4' (two) fluor tubs *8 bulbs total
1)cutting tray with dome
1)heat mate with control
2)16" os fans (they kind of suck)

Plus nutes and other.

So Mr.Hatch what do you thing I need to get.
I was thinking a 400w mh for the mothers. 5 in total (A space)
New air venting with fans, don't know which ones.

Help a grower out....

peace-

do you think i could get a pretty good yeild in a 4x4 area with lets say aeropoinc system with 64 pots. i don't want them to get to tall but want max yeild. thought about white widow or chronic or indie kush. what do you say has the most yeild. or could you give me a couple suggestions

Hatch you should put post 141 in the tutorials! that is a great post! you continue to outdo yourself!!! Gonna have to refer to you as prof hatch!

LoganSmith said:

Good afternoon Hatch.

I was still going to try something new. And with your great advice and most excellent HOW TO. Lets see If we can't figure a system for me. I have been learning about work flow and efficiency. So as I get older I have figured this is the way to go.

The items that I have:
1)light mover
1)600w dig hps
1)465 dayton exhaust fan
4)4' (two) fluor tubs *8 bulbs total
1)cutting tray with dome
1)heat mate with control
2)16" os fans (they kind of suck)

Plus nutes and other.

So Mr.Hatch what do you thing I need to get.
I was thinking a 400w mh for the mothers. 5 in total (A space)
New air venting with fans, don't know which ones.

Help a grower out....

peace-

Click to expand...

Hey LoganSmith,,,,,,,,OK, I Looked back & Found The Measurement's Of Your Stack, Do You Have All The Stuff You Described, Already Running In The Stack???

You Mentioned Adding A 400w. MH???,,,,,,How Big Of Space Do We Have To Work With For That???,,,,,,,,,,& I Think Just For Vegging Some Mom's & Or Clone's, TI Think T-5, Or Even T-8 Well Do Just as Good Job, They Are Cheaper Cost & To Run, Less Heat, You Can Put Them Right On The Plant's.

Well Give Me Alittle More Info, & Yes We Will Work This Out!!!

obie83 said:

do you think i could get a pretty good yeild in a 4x4 area with lets say aeropoinc system with 64 pots. i don't want them to get to tall but want max yeild. thought about white widow or chronic or indie kush. what do you say has the most yeild. or could you give me a couple suggestions

Click to expand...

Yes, I Think This System Will Do Awesome, Just The question Is???? Can You Control The Heat???,,,,That Would Be The Only Draw Back With The 1,200w. Or Even The 1000w.,,,,,,, But The Two 600 Would Be The Best For Sure!!!!!,,,,,,,,,,, You Could Get 4-Pod's In There, 15 To 16 Site's Each Easy, For Strain, I'd Say The Kush, They Don't Get Over 18" Or So, Both The WW, & Chronic can Get Up To 30" Or Better????,,,,But A Guess You Could scrog????,,,,,,,Hell There Are many Was To Skin A Rat!!!!

BTW, What Kind Of Hieght Resrtiction's Are We talking About???

But Hell Ya, You Are Defnitely Headed In The Right Direction!!!!,,,,,,,keep Thinking About It, & it Will Come Together!!!

hothousemary said:

Hatch you should put post 141 in the tutorials! that is a great post! you continue to outdo yourself!!! Gonna have to refer to you as prof hatch!

Click to expand...

Say Bro, HY WHT'S UP???,,,,,,,,,I Have No Idea How To Do That????,,,,I Thought That Was Something The Mod's Do????

Bur Bro, I Just Try To Give Back, & Ttry My Best To Help A Sister Or Brother, To Get Where They Won't To Be,,,,Or I'll Give My 2cent's!!!!

Thank You Very Much For Bringing Your Charm, & Kind Word's, Up In Her!!!!!!!! Later

Hey,
Yes this is what I have now.
I have mmc so I can have the meds that I need. I norm go through 2-3g a day. Plus more when Im cooking with it.

I have just started over due to bugs. I had 12 plants before and every two wks I would take three from the cycle.Three in and three out. each one was in one gallon containers in soil.

At the moment I have one mother grape ape and three clones under the 600 hps, this is on the bottom.

One top I just got four new clones. M-kush, sage sour, purple urkle, and garlic. + grape ape, so 5 different stains.

I''m willing to change things around if it is needed. What else do you need to know?

Im looking for clean,easy and efficient. I'm not lazy but I'm getting busy so I will not have very much time to give them. I was thinking flood table. but I'm up for what ever.

I would like to save money where ever I can. I'm pretty handy if I know how to build it.

I also bought a 12'x10' 20mil liner due to the sale price, and thinking that I would do a flood table set up.

LoganSmith said:

Hey,
Yes this is what I have now.
I have mmc so I can have the meds that I need. I norm go through 2-3g a day. Plus more when Im cooking with it.

I have just started over due to bugs. I had 12 plants before and every two wks I would take three from the cycle.Three in and three out. each one was in one gallon containers in soil.

At the moment I have one mother grape ape and three clones under the 600 hps, this is on the bottom.

One top I just got four new clones. M-kush, sage sour, purple urkle, and garlic. + grape ape, so 5 different stains.

I''m willing to change things around if it is needed. What else do you need to know?

Click to expand...

Hey Do You have Any Old Thread's That Might have Your Stuff In It So I Can See it, I Think From what I'm Picturing, That You Might Have Everything, Just maybe Some Remodeling???,oh Ya, & This Cloning How Many Site Are There?"?,,,,,,,,& Everything Is In Soil Right Now???

You Know, I Have 20gal. Res. Ya I Mught Check It All The Time, But Rarely Is Anything Wrong. So If You Learn Your Water & How Long It Can Go With out Topping Off, & Stuff Like That, & Even A Float Could Be Used.

LoganSmith said:

Im looking for clean,easy and efficient. I'm not lazy but I'm getting busy so I will not have very much time to give them. I was thinking flood table. but I'm up for what ever.

I would like to save money where ever I can. I'm pretty handy if I know how to build it.

I also bought a 12'x10' 20mil liner due to the sale price, and thinking that I would do a flood table set up.

Click to expand...

You Know You Were Saying About The Flood Table, & It made Me Think Of Something Like Earl's PVC Tube's, Might Fit In The Bottom Where The 600w. Is. With The Light Track You Could Get A Nice Even Canopy???

I was looking in my pics and I don't have any at the moment. The area looks just like a bunk bud. Top and bottom. 3' on top and 5'+ on bottom. just with the back and two sides closed up.

HATCH said:

Yes, I Think This System Will Do Awesome, Just The question Is???? Can You Control The Heat???,,,,That Would Be The Only Draw Back With The 1,200w. Or Even The 1000w.,,,,,,, But The Two 600 Would Be The Best For Sure!!!!!,,,,,,,,,,, You Could Get 4-Pod's In There, 15 To 16 Site's Each Easy, For Strain, I'd Say The Kush, They Don't Get Over 18" Or So, Both The WW, & Chronic can Get Up To 30" Or Better????,,,,But A Guess You Could scrog????,,,,,,,Hell There Are many Was To Skin A Rat!!!!

BTW, What Kind Of Hieght Resrtiction's Are We talking About???

But Hell Ya, You Are Defnitely Headed In The Right Direction!!!!,,,,,,,keep Thinking About It, & it Will Come Together!!!

Click to expand...

i,ve got about 6.5 ft not including the height of the pods. so with kush and 4 pods with 15 to 16 2'' cups right? would i average about 2 lbs maybe a little more. what size rubbermaid tubs are you using.

LoganSmith said:

I was looking in my pics and I don't have any at the moment. The area looks just like a bunk bud. Top and bottom. 3' on top and 5'+ on bottom. just with the back and two sides closed up.

Click to expand...

OK, That Just Would Be Helpful???,,,,,,,,,But Hey What Kind Of Skill's Do You Have????,,,,,,,,Or Could You Get Some Help In Alittle Bit Of Some Remodeling, & Building A Front For The Flower Area????,,,,,,,,

obie83 said:

i,ve got about 6.5 ft not including the height of the pods. so with kush and 4 pods with 15 to 16 2'' cups right? would i average about 2 lbs maybe a little more. what size rubbermaid tubs are you using.

Click to expand...

That Height Sound's Great, we Can Work With That.

You Know I Don't Like To Count The Chicken's Before They Hatch????,,,,,,,,But That Is Very Possible!!!!, & Yes That Is 15 Or 16 Site's In Each Top With 2" Basket's,,,,The Best Size I Like To Use Are The 10gal. Which Are 9" Tall, & The 14gal. They Are 12" Tall, There Are Some Utility Tub's That Are 20gal. There Like 3'x3' & 9" Tall & Some That Are 40gal. & Are Like 4'x4' & 9" Tall, You Can Get Them At Like Home Depot & Lowe's, By The Cement.