UnderCurrentDWC
Active Member
New Tesla Model S
Made In California
85kwh/300mi
$50,000
Made In California
85kwh/300mi
$50,000
Flowering with UnderCurrentDWC
- Thread starter UnderCurrentDWC
- Start date
UnderCurrentDWC
Active Member
[video=youtube;u8zWTyM5tNs]http://www.youtube.com/watch?v=u8zWTyM5tNs[/video]
Supernatural brand is a 15 year B.C based company.
I don't like recommending nutes, I can say it's worked well for me.
What I like is:
-It's Ph buffered
-It's an all-in-one
-I can get buy with only a few products, a veg, a bloom and a bud booster
JJFOURTWENTY
Well-Known Member
Supernatural is a dope ass brand... I own three of their 2x4 Fearless Gardener air tables and I wouldn't give those babies up for nothing!
BigBuddahCheese
New Member
Ok I guess a hundred bucks for a grow cycle is not too bad.. I will try it. I cannot get over your plants lush, green and abundant. My apologies I only watched the Youtube kid commercials for AquaGrow and AquaBloom.
Thehealthcoop
Member
Other than the car. TESLA is my personal favorite historical hero, a real deal FORGE. (Question) "In my daily remodification of my pre production plan. I will be using an 18 site RDVC system, (3) rows of 6 with 32" from center. My original plan drafted at an 11'x21' room with a 10' ceiling. That gave me 4.5' of walk around space from the edge center to the wall and 4.5' from the res epicenter. I'm interested to know what the circumference of your ladies are, with tomato rails how much area around each lady do i really need to do a proper SCROG in my room so i can still get some reflection off the side walls.
Also I'm considering lengthening the 3' PVC pipe from the first sites to the epicenter so that I may bring the walls in even closer and actually place the RES TANK, EPICENTER tank and CHILLER out side of the room. Place the Plumbing in the walls. Reducing the area and Cubit footage inside the actual room. ?
P.S Where'd ya get your TECHSHIELD, I may have missed that in a late night blurry eyed journal read, and do you even need dry wall when using R13 insulation and TechShield 4x8 Walls when properly sealed?
Again apologies for the bunch a bunch questions, my ruled Moleskin notebook is starting to look like a prop/journal of some post modern Alchemist. LOL Thanks
Also I'm considering lengthening the 3' PVC pipe from the first sites to the epicenter so that I may bring the walls in even closer and actually place the RES TANK, EPICENTER tank and CHILLER out side of the room. Place the Plumbing in the walls. Reducing the area and Cubit footage inside the actual room. ?
P.S Where'd ya get your TECHSHIELD, I may have missed that in a late night blurry eyed journal read, and do you even need dry wall when using R13 insulation and TechShield 4x8 Walls when properly sealed?
Again apologies for the bunch a bunch questions, my ruled Moleskin notebook is starting to look like a prop/journal of some post modern Alchemist. LOL Thanks
UnderCurrentDWC
Active Member
My largest plant in a tomato cage is almost five feet wide.
You want to know how much room you need for a scrog?.. it really depends on how much of the scrog screen you fill before the flip, 1/2 the screen filled @ flip the plant will probably fill the whole thing by the end of flower, the whole screen filled then flip and you'll need much more room around the screen or you'll have overcrowding.
Rez and epi out of the room is a good idea
I picked up the Techshield at blowe's it's usually on sale during the summer, If your building a room that will later become a bedroom than sure use drywall, but if your just building a grow room there is no need for framed walls with insulation with drywall than techshield than orca film.
I would recommend framing your wall insulate it than apply techshield shinny side out and tape up the seems.
What's nice about this is you can attach anything you want on the walls anywhere.
You could frame the wall insulate than staple orca to the studs (cheapest way)
You could frame the wall insulate than drywall and paint white, this would give you a room to use as a future bedroom after the grow and might add resale value.
You want to know how much room you need for a scrog?.. it really depends on how much of the scrog screen you fill before the flip, 1/2 the screen filled @ flip the plant will probably fill the whole thing by the end of flower, the whole screen filled then flip and you'll need much more room around the screen or you'll have overcrowding.
Rez and epi out of the room is a good idea
I picked up the Techshield at blowe's it's usually on sale during the summer, If your building a room that will later become a bedroom than sure use drywall, but if your just building a grow room there is no need for framed walls with insulation with drywall than techshield than orca film.
I would recommend framing your wall insulate it than apply techshield shinny side out and tape up the seems.
What's nice about this is you can attach anything you want on the walls anywhere.
You could frame the wall insulate than staple orca to the studs (cheapest way)
You could frame the wall insulate than drywall and paint white, this would give you a room to use as a future bedroom after the grow and might add resale value.
Thehealthcoop
Member
Thanks again DWC, yeah, I will be doing a custom room inside my work studio space, not the home, So I think I will go for the insulated frame with TechSHield, I believe you said the TechShield already has an IR layer. Then , SS Haze, Supr Lemon Haze, n OGK, veg 3weeks, Super Crop & Top, Veg 3 more weeks, Flower 6.3 weeks or till honey. Originally I was gonna cover the Techshield with WHite Orca for the maximum reflectivity, but seems like yours and others are getting good bounce back from the TECH alone. Great!. Thanks as always. BTW, folks do I need to post a certain number before I can add an avatar?
UnderCurrentDWC
Active Member
UnderCurrentDWC
Active Member
Do T.S.A Body scans lead to the government sponsored "Sanduskafying" of America?
You be the judge!
You be the judge!
UnderCurrentDWC
Active Member
Built a 6 site UC for veg.
Plants now go through 3 stages of veg before flowering
Cuts go into an ezcloner for 2 weeks @ 250ppm+-/5.8ph+-
Than transfered to 6" net pots and vegged for another 2-3 weeks @ 500ppm+-/5.8ph+- until plants are crowding.
Third stage each plant gets its own tote in the UC @ 700ppm+-/5.8ph+- until the right size for flower
I plan on changing out the grow room after harvest to 4 plants @ 96" o/c in 28 gallon totes with 4000 watts of bare bulb
xo
ox
xo
ox
Ends up with 2 plants getting 3kw each and 2 plants getting 2kw each
Plants now go through 3 stages of veg before flowering
Cuts go into an ezcloner for 2 weeks @ 250ppm+-/5.8ph+-
Than transfered to 6" net pots and vegged for another 2-3 weeks @ 500ppm+-/5.8ph+- until plants are crowding.
Third stage each plant gets its own tote in the UC @ 700ppm+-/5.8ph+- until the right size for flower
I plan on changing out the grow room after harvest to 4 plants @ 96" o/c in 28 gallon totes with 4000 watts of bare bulb
xo
ox
xo
ox
Ends up with 2 plants getting 3kw each and 2 plants getting 2kw each
Thehealthcoop
Member
Very nice, those are indeed some very healthy looking leaves. What's that there, your 2 & 8 lamp T5's on top of those 6?
UnderCurrentDWC
Active Member
Thanks guys!
Yes they are t5's, a 16 bulb over the UC system and an 8 bulb over the other system
UnderCurrentDWC
Active Member
11/13
550ppm
6.1ph
70-89*F
30-45%Rh
64*F h2o
Rez change
24 hour 5.9ph flush
100 gallons water
Rez change
100 gallons water
33 tbl supernatural superboost
6 tbl supernatural budblaster
40 ml 35% h2o2
550ppm
6.1ph
70-89*F
30-45%Rh
64*F h2o
Rez change
24 hour 5.9ph flush
100 gallons water
Rez change
100 gallons water
33 tbl supernatural superboost
6 tbl supernatural budblaster
40 ml 35% h2o2
Thehealthcoop
Member
Once again, those r some lovely roots, you doing H202? a lil bit? Apologies if I missed, sooooo much info absorption in the wee hours. ThanksThanks guys!
Yes they are t5's, a 16 bulb over the UC system and an 8 bulb over the other system
Thehealthcoop
Member
P.s. Still love to get the email from ya about either getting one of your systems, or an itemized list of materials to DIY it, those manifolds is where it gets a lil extra.
ilikeweed12
Member
So I see you are still on using the super boost? What changed your mind? Did you have better luck using it vs. Just running bloom all the way through?
UnderCurrentDWC
Active Member
Well I had the super boost so I decided to keep to the manufactures schedule, I wanted to see if I would get different results, if not... well I used up all the boost I had and won't mess with it further.
BigBuddahCheese
New Member
I am using SuperNatural in my DWC now in VEG and plants seem to rocketing like never before. I use 1.5 teaspoons for 3.5 gallons about 400-500ppm still might be tad hot in veg but plants love it.
I ordered Bloom, Superlicious, Super Boost and Bud Blaster to round it out. Will use protekt from Dyna for Silica. Hope the bloom is as good as the veg, powder is not so bad so far. Doesn't quite mix as easy as their videos but does mix rather well.
I dig the blue tint but I hear they are removing dyes now. Bummer I liked it.
I ordered Bloom, Superlicious, Super Boost and Bud Blaster to round it out. Will use protekt from Dyna for Silica. Hope the bloom is as good as the veg, powder is not so bad so far. Doesn't quite mix as easy as their videos but does mix rather well.
I dig the blue tint but I hear they are removing dyes now. Bummer I liked it.