first grow hydro

I'd say at least four weeks in veg before clone. You want to take the undergroth but while it's still green and soft not woody. I took clones from all of them and then just waited to see how it went and threw the males and their clones out when I knew for sure. Either ways works. Style more than substance. Once you get to that point then you can clone your clones for an all female grow on the next batch.
 
here are some more pics . I will wait to take clones they are at three weeks old now, but they are a little immature . they are just growing innernodes
 

Attachments

  • 102_2686.jpg
    102_2686.jpg
    48.6 KB · Views: 8
  • 102_2687.jpg
    102_2687.jpg
    48.2 KB · Views: 9
  • 102_2688.jpg
    102_2688.jpg
    46.7 KB · Views: 13
  • 102_2689.jpg
    102_2689.jpg
    45 KB · Views: 14
  • 102_2693.jpg
    102_2693.jpg
    42.1 KB · Views: 8
  • 102_2692.jpg
    102_2692.jpg
    53.4 KB · Views: 6
  • 102_2691.jpg
    102_2691.jpg
    47 KB · Views: 7
  • 102_2690.jpg
    102_2690.jpg
    49.5 KB · Views: 11
  • 102_2694.jpg
    102_2694.jpg
    40.2 KB · Views: 6
They look good but you're right they have a little growing to do. I don't even think about putting them into flower until I see alternating leaves. Right now the leaves are opposite each other. Alternating leaves means you can take your clones with little or no affect on the plant. I think it would be tricky to use them as replacements for males. Wrong height and you would need to harvest in two stages. It might work better to consider any clones a second grow and then clone from there with known all females.
 
few pics from an hour ago looking good the ph is droping slowly probably from the water temp rising a little , I am going to put the rez on the floor to cool the water


ps. I just fimmed two plants that were getting too tall
 

Attachments

  • 102_2704.jpg
    102_2704.jpg
    34.1 KB · Views: 5
  • 102_2703.jpg
    102_2703.jpg
    33 KB · Views: 6
  • 102_2702.jpg
    102_2702.jpg
    41 KB · Views: 5
  • 102_2701.jpg
    102_2701.jpg
    62.6 KB · Views: 7
  • 102_2695.jpg
    102_2695.jpg
    64.2 KB · Views: 12
  • 102_2696.jpg
    102_2696.jpg
    62.9 KB · Views: 5
  • 102_2697.jpg
    102_2697.jpg
    61.6 KB · Views: 6
  • 102_2699.jpg
    102_2699.jpg
    64.1 KB · Views: 8
I just bought the rest of my shit for the carbon scrubber , I will make it tomorrow and take pics as I go along
 
new pics and building of the carbon scrubber , enjoy! also pics of the two I fimmed last night
 

Attachments

  • 102_2705.jpg
    102_2705.jpg
    61.8 KB · Views: 14
  • 102_2706.jpg
    102_2706.jpg
    69.2 KB · Views: 11
  • 102_2707.jpg
    102_2707.jpg
    63.5 KB · Views: 12
  • 102_2708.jpg
    102_2708.jpg
    74.5 KB · Views: 14
  • 102_2712.jpg
    102_2712.jpg
    74.7 KB · Views: 13
  • 102_2711.jpg
    102_2711.jpg
    67.4 KB · Views: 12
  • 102_2710.jpg
    102_2710.jpg
    32.3 KB · Views: 18
  • 102_2709.jpg
    102_2709.jpg
    39.7 KB · Views: 15
  • 102_2716.jpg
    102_2716.jpg
    65.7 KB · Views: 12
  • 102_2715.jpg
    102_2715.jpg
    56.3 KB · Views: 13
  • 102_2714.jpg
    102_2714.jpg
    82.7 KB · Views: 13
  • 102_2713.jpg
    102_2713.jpg
    82.3 KB · Views: 11
  • 102_2717.jpg
    102_2717.jpg
    76.2 KB · Views: 12
  • 102_2718.jpg
    102_2718.jpg
    61 KB · Views: 14
  • 102_2719.jpg
    102_2719.jpg
    39.4 KB · Views: 13
Beauthiful! Friggin Beautiful! Nice work on the scrubber! Fim looks exactly right! I'm really impressed by your handywork!
 
well here are pics I just took , I changed the rez today , I had a little alge problem , nothing a little h2o2 cant fix , quick ? though , that brown leaf pick I posted does anyone have a clue as to what it is , and how did the fim come out , I just wanted to stunt it's growth , but thats not the case it's still growing rapidly , that one might be a male couse the always grow taller to shed their cum on the shorter bitches , we'll wait and see, all welcome to share .
 

Attachments

  • 102_2658.jpg
    102_2658.jpg
    76.5 KB · Views: 7
  • 102_2657.jpg
    102_2657.jpg
    71 KB · Views: 8
  • 102_2656.jpg
    102_2656.jpg
    73.1 KB · Views: 7
  • 102_2655.jpg
    102_2655.jpg
    75.6 KB · Views: 8
  • 102_2659.jpg
    102_2659.jpg
    73.1 KB · Views: 6
  • 102_2660.jpg
    102_2660.jpg
    69.1 KB · Views: 5
  • 102_2661.jpg
    102_2661.jpg
    31.2 KB · Views: 7
  • 102_2663.jpg
    102_2663.jpg
    57.3 KB · Views: 5
  • 102_2664.jpg
    102_2664.jpg
    82 KB · Views: 11
  • 102_2665.jpg
    102_2665.jpg
    43.9 KB · Views: 7
Beauthiful! Friggin Beautiful! Nice work on the scrubber! Fim looks exactly right! I'm really impressed by your handywork!
thanks MC you always have some kind words , did you happen to get that camara yet I would love to see your progress . how does the fim look today . what is the differance between toping and fimming , I know how to do both , but is'nt it the same end result two tops instead of one . peace:peace:
 
Not yet but I'm hoping for Fathers day. About time to move my veg into the flower room. Want to finish this grow and have a proper cure time before I leave for my son's weeding at the beginning of Oct. Mid August harvest, 30 days to cure, 2 weeks to pack for my wife, 2 hours to pack for me!

Fimming is cutting each grow tips and leaving just a little of the original tip to encourage more bud sites. Topping is cutting the top 2-3" off the plant to encourage 2 colas instead of one.
 
Not yet but I'm hoping for Fathers day. About time to move my veg into the flower room. Want to finish this grow and have a proper cure time before I leave for my son's weeding at the beginning of Oct. Mid August harvest, 30 days to cure, 2 weeks to pack for my wife, 2 hours to pack for me!
lol real funny couse it was the same for me when me and my wife went on a cruse she had three cases of cloths to me dufflel bag

Fimming is cutting each grow tips and leaving just a little of the original tip to encourage more bud sites. Topping is cutting the top 2-3" off the plant to encourage 2 colas instead of one.
it doesnt matter what I get out of this grow it is a learning experience for me and I am practicing all I am considering doing for a real grow . thanks for the info on toping and fimming
 
it doesnt matter what I get out of this grow it is a learning experience for me and I am practicing all I am considering doing for a real grow . thanks for the info on toping and fimming
here is the little fucker that is outside he's not growing a bit
 

Attachments

  • 102_2666.jpg
    102_2666.jpg
    112.4 KB · Views: 14
here are pics from last night , look at the one in soil outside , it is the same age as the ones inside
 

Attachments

  • 102_2669.jpg
    102_2669.jpg
    69.8 KB · Views: 9
  • 102_2668.jpg
    102_2668.jpg
    59.6 KB · Views: 7
  • 102_2667.jpg
    102_2667.jpg
    81.6 KB · Views: 10
  • 102_2670.jpg
    102_2670.jpg
    75.7 KB · Views: 6
  • 102_2671.jpg
    102_2671.jpg
    73.4 KB · Views: 5
  • 102_2672.jpg
    102_2672.jpg
    74.3 KB · Views: 7
  • 102_2673.jpg
    102_2673.jpg
    75 KB · Views: 7
And they say Hydro is just the same as soil. I'll call Bullshit on that one! Little Marines in the hydro being the best they can be!
 
well here are more pics from today I was busy for the past 2 days and I went to check the rez it was like 2 gallons short so I added 5 gallons and set everything straight , I took some pics of the fimed plants and the one that kept on getting taller I just toped , no pics of that. I did it after taking the pics. that one was just getting too tall, and later today I have to set the flowering room couse next week I am cloning , they all should be ready
 

Attachments

  • 102_2681.jpg
    102_2681.jpg
    45.8 KB · Views: 11
  • 102_2680.jpg
    102_2680.jpg
    76.2 KB · Views: 10
  • 102_2679.jpg
    102_2679.jpg
    70.1 KB · Views: 13
  • 102_2678.jpg
    102_2678.jpg
    87.2 KB · Views: 7
  • 102_2682.jpg
    102_2682.jpg
    62.2 KB · Views: 9
  • 102_2683.jpg
    102_2683.jpg
    79.5 KB · Views: 6
  • 102_2684.jpg
    102_2684.jpg
    81.6 KB · Views: 6
Lookig real nice! Cloning next week sounds about right. When do you go 12/12 on this batch? I'd be looking for alternating leaf pairs.
 
Lookig real nice! Cloning next week sounds about right. When do you go 12/12 on this batch? I'd be looking for alternating leaf pairs.
after I clone for sex , I will take out the male and I am not sure how many girls I will get . I changed my mind about flowering the clones I was going to cut . I am going to clone for sex and then put them in the other room under 2 400w hps for 18/6 untill they get about 30-36 inches . and while thy are in that room I will be germinating the rest of the purple widow and some of the durbin poison or holand hope I cant make up ma mind mabe you can make it up for me , it'll make it alot easier on me lol peace
 
Good. Then I'll learn something new during your grow. Never did try to flower the clones for sex. This should be good! Getting some Purple Wreck I'm stoked about. Always wanted to try Wreck for the cola size but needed to practice my supercropping and LST first. The Urkel in it should help keep it managable and make it taste damn special and sweet. My type of weed is trippy, happy with a power sit your ass down finish. It's old guy party bud. Get all smiley and wobbly and then fall over! Like Henry Gibson on his tryke on Laugh in! Geez I'm old or I'm having flashbacks again! LOL!
 
Good. Then I'll learn something new during your grow. Never did try to flower the clones for sex. This should be good! Getting some Purple Wreck I'm stoked about. Always wanted to try Wreck for the cola size but needed to practice my supercropping and LST first. The Urkel in it should help keep it managable and make it taste damn special and sweet. My type of weed is trippy, happy with a power sit your ass down finish. It's old guy party bud. Get all smiley and wobbly and then fall over! Like Henry Gibson on his tryke on Laugh in! Geez I'm old or I'm having flashbacks again! LOL!
out of which vendor are you getting the purple wreck
 
Back
Top