So far I have a 90% success rate cloning.
I am only doing it with one plant but it is easy.
I use rock wool, substrate Doesn't matter.
You should have a plastic hood and a spray bottle,
a warming mat as well it does make them root faster.
I bought throw away scalpels on Amazon, cheap reusable. Razor blade works too.
I cut the clone from the plant and drop it in a glass of water.
I go to my table and first remove any lower growth.
I cut the bottom cleanly at 45 degrees.
Now looking at the face of your first cut split the 45 down the middle, this is a shallow cut.
I then scrape about 1/4" long strip of surface from the stem opposite the 45 .
Now I put them in a cup with rooting gel for 5 minutes and then I shove them in my rock wool, U can use your coco and a cup with drain holes.
I use Olivias Cloning solution at 1/2 strength, about 200 ppm to spray clones, ph to 5.95.
I use a 95 watt T5 fixture to light my clones.
Clones have no roots and need to draw in water via misting and humidity.
I mist 3x a day, each time misting the inside of the hood as well.
The overall moisture at over 80% will keep the coco or rock wool damp.
Roots will be out in 7-10 days, I have let them go longer but now I only go 10 days.
Have 2-4 fans on a clone and at least 3 nodes.
Cut off the tips of all fans, actually cut fans in half.
Keep cuttings moist till roots show.
Bless,
DZ
