crazyhazey
Well-Known Member
can i buy the kit for this at a store or some shit?
Fan leaf joint papers?
- Thread starter crazyhazey
- Start date
can i buy the kit for this at a store or some shit?
berkman858
Well-Known Member
This video sucks donkey balls. Dirty handed foreigner has stupid high pitched noise throughout the entire video.
Oh, and either clean or get a new keyboard ya dirty hippy. (meant for weirdo in video)
badmojo420
Well-Known Member
yeah man, hes got kinda an annoying voice. i personally enjoy his videos... i also happen to be a dirty hippie
he has an amazing glass collection, something like 30 or 40 bongs, all of them high end glass like RooR, PHX, and a bunch of other brands i havent really heard of and he has this bad ass attachment for his bongs that fits in the female piece and is like a cone to catch smoke knife hits (want one soooo bad!!!) i dont believe theres a kit for it.. unless your talking about his micron screens? Im pretty sure the jars with different micron sizes on them were from bubble bags, you can get them all over the interwebs and at some hydro stores, theyre like $150 i think for a set of 5 or 6, something like that.http://www.youtube.com/watch?v=4cUmQ_3lRbY heres just a taste of some of his glass pieces..
http://www.youtube.com/watch?v=bsuoQXm2xVg sorry this is the one i meant, but the first one is still a hell of a rip lol, even though alot sucked through before it burned, still a hell of a hit
RoguePlant
Active Member
I personally do this myself and have friends that do this:
(Works best with large Indica leafs )
It's basically the same process as drying and curing tobacco leafs for cigars.( skip steps 3 and 4 ) Here is a link for the process/ you can also find some ok videos on youtube.
http://www.wonderhowto.com/how-to-roll-your-own-cigars-home-0123429/
(Works best with large Indica leafs )
It's basically the same process as drying and curing tobacco leafs for cigars.( skip steps 3 and 4 ) Here is a link for the process/ you can also find some ok videos on youtube.
http://www.wonderhowto.com/how-to-roll-your-own-cigars-home-0123429/
Weedasaurus
Well-Known Member
i'de imagine smoking a fan leaf might make you want to throw up.
crazyhazey
Well-Known Member
dont know till you try it, buds are practically plant matter either way. im starting to wonder if using fan leaves that yellow towards the end of flower would be better, the nitrogen is drained out of them so maybe it wont taste too bad.
berkman858
Well-Known Member
If you can put the fan leaves in the freezer for a few weeks or a month without destroying their ability to be rolled, I think that may help remove that shitty chlorophyll taste.
crazyhazey
Well-Known Member
true, i could just vacuum seal them or put em in a mason jar.
monkeybones
Well-Known Member
maybe... boil a leaf and then soak it in isopropyl for a bit to remove the chlorophyll? then let the alcohol evaporate
i haven't tried anything like that so i don't know if the resulting leaf would be flexible yet strong enough to roll with
you might also be able to sun dry a leaf on parchement paper or something to get the chlorophyll out and then wet it in order to roll with it
i don't understand the obsession with rolling joints though. pipes really do save a lot of weed and lungs
i haven't tried anything like that so i don't know if the resulting leaf would be flexible yet strong enough to roll with
you might also be able to sun dry a leaf on parchement paper or something to get the chlorophyll out and then wet it in order to roll with it
i don't understand the obsession with rolling joints though. pipes really do save a lot of weed and lungs
doowmd
Well-Known Member
great idea.......totally going to try and make some fan-leaf pulp into paper this season!!!!!!!!
berkman858
Well-Known Member
I hear you but sometimes it's fun to do something wacky like roll an all MJ cigar or joint. Some of us have a little too much time on our hands and we tend to get inventive. I don't think it's necessarily a bad thing.
racerboy71
bud bootlegger
there was once a great article in either high times or skunk awhile back now that showed how to make joints using leaf material, and it's nothing like that link jodro put up..
in this one, the simply cut a leaf into a rectangle, and i think they may have even bleached the leaf to get rid of that green taste..
then they made up i think it was a sugar water mix heavy in the sugary side to seal it up with when done..
the even put them on a stick and wrapped it with string and shit, they were pretty badass, but labor intensive for sure.. wish i could find the link for it but i've looked before and didn't find poo on them..
i'll look around again though for shitz and giggles..
in this one, the simply cut a leaf into a rectangle, and i think they may have even bleached the leaf to get rid of that green taste..
then they made up i think it was a sugar water mix heavy in the sugary side to seal it up with when done..
the even put them on a stick and wrapped it with string and shit, they were pretty badass, but labor intensive for sure.. wish i could find the link for it but i've looked before and didn't find poo on them..
i'll look around again though for shitz and giggles..
dank smoker420
Well-Known Member
sounds like a thai stick.
racerboy71
bud bootlegger
not the article i'm looking for but...
http://www.weedfarmer.com/joint_rolling/cannabis-cigar/cannabis-cigar.htm
http://www.weedfarmer.com/joint_rolling/cannabis-cigar/cannabis-cigar.htm
racerboy71
bud bootlegger
here's another one, this is a lot like the first link, but still not what i'm looking for..
http://weedsmokersguide.com/roll-marijuana-cigar/
http://weedsmokersguide.com/roll-marijuana-cigar/
dank smoker420
Well-Known Member
interesting. does anyone know how to make a thai stick? has anyone every made one?
doowmd
Well-Known Member
The Cannabis Cigar aka BLUNT (100% Cannabis Material!)
A pure cannabis cigar is perhaps the ultimate joint and a must for the rich, famous and well connected. Using exotic, hard-to-get ingredients this can be a hard one to get together.
First, find yourself a thai stick, (cured buds tied around a bamboo sliver) Remove any thread and carefully coat it with liquid cannabis resin oil.
Wrap the coated stick with small, uncured, 'top' leaves, taking care to remove any stems.
Secure the leaves with thread and coat with more liquid resin. Leave the cigar to dry in a dark, dry and warm place for a day or so.
Remove the thread and repeat the entire process. Use progressively larger cannabis leaves until the cigar is suitably fat.
Use large 'sun' leaves to seal the cigar, add a final coat of cannabis resin and secure with more thread.
Leave the finished cigars to dry. In two to three weeks it should be ready to smoke.
When drying is complete, remove the thread and carefully pull the bamboo sliver from inside the cigar to create a smoking tube. Store your cigars in a dry air-tight container - the longer you leave them, the better (and stronger) the y will get.
A pure cannabis cigar is perhaps the ultimate joint and a must for the rich, famous and well connected. Using exotic, hard-to-get ingredients this can be a hard one to get together.
monkeybones
Well-Known Member
okay, even as a pipe smoker it's hard to resist making one of those *points up* once harvest is complete. that just looks too fucking fun.. and talk about a crowd pleaser
but christ, i hope i have a crowd to share it with. to consume it alone you'd have to keep re-lighting it for weeks
but christ, i hope i have a crowd to share it with. to consume it alone you'd have to keep re-lighting it for weeks
monkeybones
Well-Known Member
also, you should cite copy and paste guides
http://www.weedfarmer.com/joint_rolling/cannabis-cigar/cannabis-cigar.htm
http://www.weedfarmer.com/joint_rolling/cannabis-cigar/cannabis-cigar.htm
crazyhazey
Well-Known Member
okay, even as a pipe smoker it's hard to resist making one of those *points up* once harvest is complete. that just looks too fucking fun.. and talk about a crowd pleaser
but christ, i hope i have a crowd to share it with. to consume it alone you'd have to keep re-lighting it for weeks
myeh, i dont mean to brag but id gladly face a fat fan leaf cigar right now hahaha. i think if i properly dry the leaves, or the entire "cigar" perhaps it will burn well, ill try to leave some humidity so it doesnt burn like the wick of a firework haha.
