Ethos Collective Blackfire and Exotic Genetix Future SOG and mother flower

apart from the salt buildup burn these are doing good considering all the new experimental shit im putting them through lol. they will get flushed heavily tonight with 1/4 strength nutes. next round will be recirculating drip so that way i can flush all the way through and avoid the buildup. still waiting on some parts but then i should be good to go. my phone hates taking night shots. sorry for the blurry pics. these have about 3 more weeks left and the SOGlings about 4 i think.

i think next round will be KISS with the nutrients. just A, B and calmag.
 

Attachments

  • IMG_1734.JPG
    IMG_1734.JPG
    196.3 KB · Views: 47
  • IMG_1735.JPG
    IMG_1735.JPG
    235.6 KB · Views: 42
  • IMG_1736.JPG
    IMG_1736.JPG
    197.8 KB · Views: 41
  • IMG_1737.JPG
    IMG_1737.JPG
    239.4 KB · Views: 42
  • IMG_1738.JPG
    IMG_1738.JPG
    257.3 KB · Views: 43
calmag came in, trim tray came in, my coco mat was back ordered so i have to find it elsewhere. i get my lumber tomorrow and as soon as the panda room is up the table will get going. my pond liner doesnt get here til wednesday so thats when the moms will get flipped. gonna be a busy week!

heres some shots from the harvest last week. CGS Chem D CookiesView attachment 3883206 View attachment 3883207 View attachment 3883208 View attachment 3883210
I admire the motivation you possess
 
I admire the motivation you possess
i wish i was a bit more disciplined and i would have a much more productive garden. right now im trying to design some sheet metal "hoods" for my LED arrays to trap and remove the hot air. i might just say fuck it and mini split/CO2 the room instead. soon i will be switching back to low plant count and bigger plants as soon as the pheno hunt is over with. i cant wait! too many to care for lol
 
i wish i was a bit more disciplined and i would have a much more productive garden. right now im trying to design some sheet metal "hoods" for my LED arrays to trap and remove the hot air. i might just say fuck it and mini split/CO2 the room instead. soon i will be switching back to low plant count and bigger plants as soon as the pheno hunt is over with. i cant wait! too many to care for lol
I hope you find your "NEO" LOL
 
flushing a bit more and dropping the nutrient strength again. gonna get it around 1.0 ec and see how that goes lol. the new guys are looking great and stretching into place nicely. i will have to build a scrog frame for them shortly. just gonna do furring strips with netting stretched across and stapled to it then hang it from the ceiling. still waiting on all of my drippers so i can get automated. amazon prime screwed me over on the last few things i ordered. taken over a week to get a prime 2 day shipping item. pissing me off.
 

Attachments

  • IMG_1750.JPG
    IMG_1750.JPG
    301.7 KB · Views: 31
  • IMG_1751.JPG
    IMG_1751.JPG
    229.3 KB · Views: 32
  • IMG_1753.JPG
    IMG_1753.JPG
    256.1 KB · Views: 31
  • IMG_1754.JPG
    IMG_1754.JPG
    237 KB · Views: 29
  • IMG_1755.JPG
    IMG_1755.JPG
    240.8 KB · Views: 29
the hermies are looking so dank i thought about revegging one lol. its a damn shame. they would have been some proper top shelf.
 
starting to flush. gonna pull them in about a week. i hope the new ones didnt get seeded. i will be pissed! either way it will be a good indicator of what they are capable of and whether or not they are worth keeping a mother of. the first three pics are of the hermie future in all its beauty, the single plant is a nice harambe and then the whole canopy.
 

Attachments

  • IMG_1789.JPG
    IMG_1789.JPG
    256.9 KB · Views: 31
  • IMG_1790.JPG
    IMG_1790.JPG
    228 KB · Views: 28
  • IMG_1791.JPG
    IMG_1791.JPG
    299.5 KB · Views: 29
  • IMG_1793.JPG
    IMG_1793.JPG
    305.4 KB · Views: 28
  • IMG_1794.JPG
    IMG_1794.JPG
    302.1 KB · Views: 28
pulling down to hang tomorrow! grabbed my 2x4 tent poles out of storage and forgot the tent itself lol. i shall try again in the morning. looks like everything is coming down and then i will space out my new ones over the whole table. they need some breathing room!
 

Attachments

  • IMG_1818.JPG
    IMG_1818.JPG
    350 KB · Views: 21
  • IMG_1820.JPG
    IMG_1820.JPG
    191.5 KB · Views: 21
  • IMG_1822.JPG
    IMG_1822.JPG
    262.1 KB · Views: 22
  • IMG_1823.JPG
    IMG_1823.JPG
    280.8 KB · Views: 22
oh shit! look who's about to be running air cooled LED's. gonna have the coolest room in the state! :)

now that i know the layout works inside the chamber all i need to do is order 1/8" aluminum sheet to replace the glass and mount the heatsinks to it. gonna be easy as shit. then i will just change the plug to take the right connector and all set!

as you can see there will be 9 LEDs in each hood. i will mount the drivers inside as well so that their heat is removed also. speaking of drivers each set of 3 LED will have its own dedicated hlg185 set to 222W exactly that way my hoods burn an ominous 666 watts and bring out the evil. one 6" fan will be able to handle all the hoods since they dont get all that hot. super pumped about being able to use old parts and save some time and money all while recycling some gear from storage thats just been sitting there costing me money.
 

Attachments

  • IMG_1832.JPG
    IMG_1832.JPG
    120 KB · Views: 22
  • IMG_1833.JPG
    IMG_1833.JPG
    123 KB · Views: 21
chop time! and i spread out the others to fill the whole table. tomorrow they get scrogged :) they are looking great but are starting to show signs of needing more food. from here on out they go back to full strength +
 

Attachments

  • IMG_1841.JPG
    IMG_1841.JPG
    265.6 KB · Views: 32
  • IMG_1842.JPG
    IMG_1842.JPG
    290 KB · Views: 34
  • IMG_1843.JPG
    IMG_1843.JPG
    260.5 KB · Views: 32
  • IMG_1844.JPG
    IMG_1844.JPG
    257.2 KB · Views: 33
Looking good not sure how I missed this log. Can't wait to the the new wave of flowering plants. Specs on the LED build?
i think everyone missed it lol. i dont think the grow logs get much traffic. the clones of all the Ethos gear that are on the table now are getting big. there are already a few standouts. they should get transplanted tonight after i build my SCROG frames. gonna be a long day again and its my last day off :(

the LEDs are CITI 1212s in 3000k, one per sq ft at 37.5 W. they are being driven by hlg185 48a's. i also have two rigs for a 4x8 that are cxm22's driven at 50W. i didnt notice a difference in size or weight between the 800w array and the 600w array so i think i will drop down the power to 600w until i run CO2 in the room.
 
i think everyone missed it lol. i dont think the grow logs get much traffic. the clones of all the Ethos gear that are on the table now are getting big. there are already a few standouts. they should get transplanted tonight after i build my SCROG frames. gonna be a long day again and its my last day off :(

the LEDs are CITI 1212s in 3000k, one per sq ft at 37.5 W. they are being driven by hlg185 48a's. i also have two rigs for a 4x8 that are cxm22's driven at 50W. i didnt notice a difference in size or weight between the 800w array and the 600w array so i think i will drop down the power to 600w until i run CO2 in the room.

Sweet thanks for the info I have pulled up a chair :mrgreen:
 
i built my scrog frames and my pre-press mold for pressing nug. gonna try it out tonight :)
i could have gone bigger on the mold but i wanted to keep it quick and simple for today. lots going on. tonight i need to get those seeds popped and mix up some stronger food. they seem to be extra hungry under the LEDs. just ordered some rosin bags and they should be here in a couple days. i will start pressing some buds without the bags and then i will re-press the extracted material in a bag to filter out the contaminants when they come in.
 

Attachments

  • IMG_1848.JPG
    IMG_1848.JPG
    166 KB · Views: 23
  • IMG_1849.JPG
    IMG_1849.JPG
    139.8 KB · Views: 23
  • IMG_1850.JPG
    IMG_1850.JPG
    199.5 KB · Views: 23
  • IMG_1851.JPG
    IMG_1851.JPG
    198.6 KB · Views: 23
Back
Top