drip system set ups

Hi All, I am struggling to determine how to set up a drip system to automate watering two 15gal smart pots. there are a lot of resources and kits online, but i am just getting confused on how to run a set up with proper pressure. many kits online come with 1/4 inch lines and different spray nozzles, others come with a 1/2 inch feeder line that you plug 1/4 inch lines into. But then drip timing and distribution becomes a concern, unless i make a ring with multiple tiny holes in the 1/4 inch line? do you leave these systems dripping for multiple hours at a time as some are rated at 1gal/hr?

If anybody has any pictures of what they've set up, or a bill of materials on what to buy (pressure regulators? backflow regulator? drip or spray nozzles?) that would be greatly appreciated

one thing I do know is that ill be buying a programmable faucet timer off amazon to start

Cheers!

Take a look at floraflex

A couple matrix tops (you need the under lay too)
Res, pump , timer , 1/4 turn valve .
1/4” line

Google the drip store, I believe it's dripirrigation,com. And CALL them. I forgot the guy's name, but he's super helpful. I suggest getting a manifold with drip stakes, with the 1gph inserts for the manifold. Set the entire thing up on a timer and you'll be fully automated. You can do this all for under $50 or so, and the added benefit of having someone on the phone telling you what parts to order is very helpful.

https://www.dripirrigation.com/d071

Above is the link to the manifold. You'll need tubing, a riser, tee's and drip stakes.

And you can also get plugs for the manifold, so if you only want to run a couple lines and block off the rest, you insert a plug in the manifold to block the port.